SAP ABAP Message Class GR (Report Writer)
Basic Data
Hierarchy
☛
SAP_FIN (Software Component) SAP_FIN
⤷ FI-SL-IS (Application Component) Information System
⤷ GRWT (Package) Report Painter / Report Writer
⤷ FI-SL-IS (Application Component) Information System
⤷ GRWT (Package) Report Painter / Report Writer
Attributes
Message class | GR | |
Short Description | Report Writer | |
Changed On | 20140121 | |
Last Changed At | 110435 |
Messages
# | Message | Message Short Text | Documentation status | Authorization check |
---|---|---|---|---|
1 | 001 | Time measurement: in hh:mm:ss &, in micro sec & | ||
2 | 002 | *-------- Report Writer messages ---------------------------------------* | ||
3 | 003 | An appropriate object was not found | ||
4 | 004 | No object was selected | ||
5 | 005 | Group & for object & not in table TBRG | ||
6 | 010 | System error: Internal error when blocking an object | ||
7 | 011 | Report & is already being edited by user & | ||
8 | 012 | Library & is already being edited by user & | ||
9 | 013 | Report group & is already being edited by user & | ||
10 | 014 | Parallel report & is already being edited by user & | ||
11 | 015 | Standard layout & is already being edited by user & | ||
12 | 016 | & & & & | ||
13 | 017 | Key figure &1 is already being edited by user &2 | Space: object requires documentation | |
14 | 019 | You cannot run the program in client &1 | Space: object requires documentation | |
15 | 020 | Report & of library & is not used yet | ||
16 | 021 | Parallel report & of library & is not used yet | ||
17 | 022 | Standard layout & is not used yet | ||
18 | 023 | Library & is not used yet | ||
19 | 024 | Report group & has been generated | ||
20 | 025 | Report group & could not be generated | ||
21 | 026 | Report group & has been generated (with warnings) | ||
22 | 027 | SAPMGRW1 has been started directly | ||
23 | 028 | SAPMGRW2 has been started directly | ||
24 | 029 | Layout control could not be generated | ||
25 | 030 | Name range is reserved for Report Writer | ||
26 | 031 | Language vector not found | ||
27 | 032 | Report group & does not contain any reports | ||
28 | 033 | The languages & have been set | ||
29 | 034 | & programs have been deleted | ||
30 | 035 | No object was selected | ||
31 | 036 | & objects have been copied from client & | ||
32 | 037 | Sets already exist for this prefix. | ||
33 | 038 | Enter an export file | ||
34 | 039 | Enter a valid amount | ||
35 | 040 | Make sure you selected cross-page | ||
36 | 041 | The selected area is not contained in the current page | ||
37 | 042 | The receiver report is called up with the general selection conditions | ||
38 | 043 | Cell is marked | ||
39 | 044 | The function can only be performed for row blocks with the type 'set' | ||
40 | 045 | The row block &1 is considered as a block for non-assigned values | ||
41 | 046 | Row block &1 is not considered as a block for non-assigned values | ||
42 | 047 | Row block &1 cannot be considered as a block for non-assigned values | ||
43 | 048 | Row block &1 is assigned to the block for non-assigned values &2 | ||
44 | 049 | It is not possible to mark rows contained in different sections | ||
45 | 050 | You cannot mark more than one row in a section that has been sorted. | ||
46 | 051 | Processing interrupted in diagnosis session | ||
47 | 052 | Report-report interface not active | ||
48 | 053 | Check the selection conditions | ||
49 | 054 | Report group & imported from client 000 | ||
50 | 055 | Processing was terminated | Space: object requires documentation | |
51 | 056 | Internal error: Not possible to enter new key figure &1 | Space: object requires documentation | |
52 | 057 | Internal error: Not possible to enter new characteristic &1. | Space: object requires documentation | |
53 | 058 | Internal error: Not possible to enter new key figure &1 | Space: object requires documentation | |
54 | 059 | The receiver report cannot be called up | Space: object requires documentation | |
55 | 060 | Characteristic &1 to be assigned to general selections | ||
56 | 061 | Check the data source | Space: object requires documentation | |
57 | 062 | Set name &1 not unique (table &2, characteristic &3) | Space: object requires documentation | |
58 | 063 | Report group &1 is being regenerated (status &2) | Space: object requires documentation | |
59 | 100 | *-------- Variation report ---------------------------------------------* | ||
60 | 101 | No valid value combination found | ||
61 | 102 | Higher-level characteristic & for characteristic & not defined uniquely | ||
62 | 103 | Only individual values can be entered for characteristic & | ||
63 | 104 | No entries made for characteristic &. | Space: object requires documentation | |
64 | 105 | Invalid set & / characteristic & for input field & | ||
65 | 106 | Invalid indicators: no hierarchy explosion for fixed set | ||
66 | 107 | Operator & in value set entry is not supported | ||
67 | 108 | Only enter either set or values for set selection | ||
68 | 109 | Variation of the selection is not supported for report group & | ||
69 | 110 | The report will be output on output mediem &1 | ||
70 | 111 | The report will be output in format &1 | ||
71 | 112 | Report section hierarchically sorted according to column &1 | ||
72 | 113 | Report section sorted according to column &1 to summation level &2 | ||
73 | 114 | *** Report output (&) *** | ||
74 | 115 | & rows hidden manually | ||
75 | 116 | Some changes only effective after regeneration | ||
76 | 117 | Text "&1" not found | Space: object requires documentation | |
77 | 118 | Text "&1" found | Space: object requires documentation | |
78 | 119 | Level 1 - Presupposes single values | Space: object requires documentation | |
79 | 145 | Internal error during currency translation | Space: object requires documentation | |
80 | 146 | The first page is already being displayed | Space: object requires documentation | |
81 | 147 | The last page is already being displayed | Space: object requires documentation | |
82 | 148 | The first section is already being displayed | Space: object requires documentation | |
83 | 149 | The last section is already being displayed | Space: object requires documentation | |
84 | 150 | *------------Extract administration-------------------------------------* | ||
85 | 151 | GRIX test mode: internal error. | Space: object requires documentation | |
86 | 152 | Passwords do not match. | ||
87 | 153 | Incorrect password. | ||
88 | 154 | Validity date can only be changed for all extracts of a variation run | Space: object requires documentation | |
89 | 155 | Place your cursor on a valid column. | ||
90 | 156 | Enter a value other than 0. | Space: object requires documentation | |
91 | 157 | Enter a valid date | Space: object requires documentation | |
92 | 158 | All extracts will be printed with active variation | Space: object requires documentation | |
93 | 159 | Select one of the extracts listed | Space: object requires documentation | |
94 | 160 | Unpermitted interval for report groups | Space: object requires documentation | |
95 | 161 | Only a single extract can be selected for display | Space: object requires documentation | |
96 | 162 | Specified printer does not exist | Space: object requires documentation | |
97 | 163 | At least one extract must be selected to change validity | Space: object requires documentation | |
98 | 164 | Characteristic not permitted | Space: object requires documentation | |
99 | 165 | First enter a characteristic | Space: object requires documentation | |
100 | 166 | Enter value or group | Space: object requires documentation | |
101 | 167 | Data source changed in reselection setting | Space: object requires documentation | |
102 | 168 | No new extract will be created | Space: object requires documentation | |
103 | 169 | No extract was found for the selection criteria entered | Space: object requires documentation | |
104 | 170 | Choose an extract | Space: object requires documentation | |
105 | 171 | Only one index entry is made for the extract | Space: object requires documentation | |
106 | 172 | Not all the selected entries can be deleted | Space: object requires documentation | |
107 | 173 | Not all selected entries can be changed | Space: object requires documentation | |
108 | 174 | Password could not be deleted for all the selected extracts | Space: object requires documentation | |
109 | 175 | Password could not be changed for all the selected extracts | Space: object requires documentation | |
110 | 176 | Password for extract "&" could not be changed | Space: object requires documentation | |
111 | 177 | Password for extract "&" was deleted | Space: object requires documentation | |
112 | 178 | Password for extract "&" was changed | Space: object requires documentation | |
113 | 179 | Invalid entry for &1 | Space: object requires documentation | |
114 | 180 | Single value &1 for characteristic &2 does not exist | Space: object requires documentation | |
115 | 181 | The extract sent to you has been deleted | Space: object requires documentation | |
116 | 182 | You do not have the authorization to create extracts | Space: object requires documentation | |
117 | 183 | You do not have the authorization to delete/change this extract | Space: object requires documentation | |
118 | 184 | A matching extract was not found, so a new selection was made | Space: object requires documentation | |
119 | 185 | The newest extract was selected | Space: object requires documentation | |
120 | 186 | Not all the selected extracts could be regenerated | Space: object requires documentation | |
121 | 187 | Selected extracts have been regenerated | Space: object requires documentation | |
122 | 188 | Extract is not allowed | Space: object requires documentation | |
123 | 189 | Extract could not be generated | Space: object requires documentation | |
124 | 190 | No translation rate exists from &1 to &2 for the date &3 and exch.type &4 | Space: object requires documentation | |
125 | 191 | Target currency or exch. rate type missing or no key figure was selected | Space: object requires documentation | |
126 | 200 | *-------- Internal error messages --------------------------------------* | ||
127 | 201 | Internal error: Incorrect report in PROCESS_OUT2_ENTRY | ||
128 | 202 | Internal error: Incorrect report in APPEND-MATRIX | ||
129 | 203 | Internal error: Incorrect index in ADD-VALUE-& | ||
130 | 204 | Internal error: Incorrect index in GET-VALUE-& | ||
131 | 205 | Internal error: Entry in COLUMNS does not exist (MERGE-RC) | ||
132 | 206 | Internal error: Operand is not in COLUMNS (JxxxxmmF) | ||
133 | 207 | Internal error: Total is not in TOTALS (JxxxxmmF) | ||
134 | 208 | Internal error: Incorrect status in E41_GET_NEXT_ENTRY | ||
135 | 209 | Internal error: Currency or quantity field missing in additional table | ||
136 | 210 | Internal error: Invalid value variable. | ||
137 | 211 | Internal error: Invalid offset in APPEND-C. | ||
138 | 212 | Internal error: Invalid type in APPEND-C. | ||
139 | 213 | Internal error: Class & not available (field &). | ||
140 | 214 | Internal error: Program & , include & , form & . | ||
141 | 215 | Internal error: More than & GREP blocks were requested | Space: object requires documentation | |
142 | 216 | Internal error: Syntax error in program & (return code &) | ||
143 | 217 | Internal error: no data found in the memory | ||
144 | 218 | Internal error: data could not be written to the memory | ||
145 | 219 | Internal error in SAPLGRWI: Invalid index | ||
146 | 220 | Internal error during conversion of a Report Painter report. | ||
147 | 221 | Internal error: Field &1-&2 does not exist | ||
148 | 222 | Internal error: Invalid row formula | ||
149 | 223 | Internal error: Invalid key figure block formula | ||
150 | 224 | Report Painter: Internal error when converting a report | ||
151 | 225 | Report Painter: Error when generating a report. | ||
152 | 226 | Report Painter: Library & does not exist | ||
153 | 227 | Report Painter: Internal error, variable & does not exist | ||
154 | 228 | Internal error: Error contained in field value in dypro SAPLGRWT 1100 | ||
155 | 229 | Key figure block &1, row &2, column &3: Formula cannot be converted | ||
156 | 230 | Internal error: call obsolete | Space: object requires documentation | |
157 | 231 | Internal error: Report Writer control table & is inconsistent | Space: object requires documentation | |
158 | 232 | Internal error: Set & does not exist. | Space: object requires documentation | |
159 | 233 | Internal error: Table field for variable & cannot be determined | Space: object requires documentation | |
160 | 234 | Internal error: Inconsistency in section & | Space: object requires documentation | |
161 | 235 | Internal error: RC = 1, routine &2, keywords &3 &4 | Space: object requires documentation | |
162 | 246 | The characteristic &1 cannot be deactivated. | ||
163 | 247 | The key figure &1 cannot be deactivated. | ||
164 | 248 | The characteristic &2 was automatically activated. | ||
165 | 249 | The key figure &2 was automatically activated. | ||
166 | 250 | No key figures selected in library & | ||
167 | 251 | No documentation stored for key figure & | ||
168 | 252 | Report contains more than &1 columns | ||
169 | 253 | Report group &1 is currently already generated | ||
170 | 254 | The selected data was saved | ||
171 | 255 | Floating point number cannot be converted | ||
172 | 256 | The selected data could not be saved | Space: object requires documentation | |
173 | 300 | *-------- Transactions -------------------------------------------------* | ||
174 | 301 | The key figure block formula contains a syntactic error | ||
175 | 302 | Report & already exists in library & | ||
176 | 303 | Enter report and library | ||
177 | 304 | Report & does not exist in library &. | ||
178 | 305 | Set ID cannot be cancelled | ||
179 | 306 | Assign a report first | ||
180 | 307 | Set & does not contain any entries | ||
181 | 308 | Set & does not exist | ||
182 | 309 | Row & does not exist | ||
183 | 310 | The report can only be maintained in the logon language | ||
184 | 311 | Standard layout & has been assigned to the report | ||
185 | 312 | Invalid report name | Space: object requires documentation | |
186 | 313 | Enter all length and width values | ||
187 | 314 | Internal error when blocking the report | ||
188 | 315 | The report is being edited by another user | ||
189 | 316 | Column & does not exist | ||
190 | 317 | Enter the window value for report & (entry &) | ||
191 | 318 | Report & (entry &) is too large for the logical page | ||
192 | 319 | Enter a numeric value | ||
193 | 320 | You have not yet defined a key figure block | ||
194 | 321 | No symbolic names exist in the set | ||
195 | 322 | Enter library and parallel report | ||
196 | 323 | Parallel report & & already exists | ||
197 | 324 | Parallel report & & does not exist | ||
198 | 325 | The parallel report is being edited by another user | ||
199 | 326 | Enter a value not equal to zero | ||
200 | 327 | Generate report group & first | ||
201 | 328 | Report & (entry &) is entered repeatedly | ||
202 | 329 | You are changing a parallel report of user & | ||
203 | 330 | No cells exist in the column set | ||
204 | 331 | Library default set & has been assigned characteristic & | ||
205 | 332 | Library default set & does not exist | ||
206 | 333 | Position cursor on the entry to be deleted | ||
207 | 334 | No row or column coordinates selected | ||
208 | 335 | The specified key figure block does not exist | ||
209 | 336 | Library & already exists | ||
210 | 337 | Library & does not exist. | ||
211 | 338 | The block is already used in the row definition | ||
212 | 339 | Enter a library name | ||
213 | 340 | Specify either table or library to be copied | ||
214 | 341 | Do not create any objects with leading numbers | ||
215 | 342 | The report to be copied does not exist | ||
216 | 343 | Do not change any objects with leading zeros | ||
217 | 344 | Do not delete any objects with leading zeros | ||
218 | 345 | The library you want to copy uses table & | ||
219 | 346 | Specify valid table name | ||
220 | 347 | Enter a valid status | ||
221 | 348 | & is not a single, basic or key figure set | Space: object requires documentation | |
222 | 349 | Enter a to-value that is greater than the from-value | ||
223 | 350 | Choose at least one set type | ||
224 | 351 | Highlight level was not specified | ||
225 | 352 | Single values only possible with valid variation range | ||
226 | 353 | Report & is used repeatedly | ||
227 | 354 | Parallel report & is used repeatedly | ||
228 | 355 | Standard layout & is used in report & & | ||
229 | 356 | The first key figure block is already displayed | ||
230 | 357 | The last key figure block is already displayed | ||
231 | 358 | Last row is displayed | ||
232 | 359 | Last column is displayed | ||
233 | 360 | Enter language and standard layout | ||
234 | 361 | Invalid input combination field / variable / value | ||
235 | 362 | Where possible, limit input combination | Space: object requires documentation | |
236 | 363 | First row is displayed | ||
237 | 364 | First column is displayed | ||
238 | 365 | Define cell completely | ||
239 | 366 | Report &1: Cell &2 cannot be calculated | ||
240 | 367 | Report &1, key figure block &2: Formula (&3,&4) cannot be calculated | Space: object requires documentation | |
241 | 368 | *** Additional Tests (&) *** | ||
242 | 369 | Formula row &1 cannot not be calculated | ||
243 | 370 | The formula row &1 does not have any row operands | ||
244 | 371 | Report & & has been created by the Report Painter | ||
245 | 372 | You are changing a report of user & | ||
246 | 373 | Library & is used by report & | ||
247 | 374 | Library & is used by parallel report & | ||
248 | 375 | Report &1: Cell &2 has an invalid row address | ||
249 | 376 | Report &1: Cell &2 has an invalid column address | ||
250 | 377 | Column &: & list columns created | ||
251 | 378 | Cell name &2 is not valid | ||
252 | 379 | The column structure in formula row &1 cannot be determined | ||
253 | 380 | Enter from-level not equal to zero | ||
254 | 381 | Only negative levels '1-' and '2-' are possible | ||
255 | 382 | A report group does not yet exist for the report | ||
256 | 383 | The entry of group &1 is not valid | Space: object requires documentation | |
257 | 384 | With a negative from level, a to level is not possible | ||
258 | 385 | You cannot enter a to-level which is smaller than the from-level | ||
259 | 386 | You cannot vary the selection for the period characteristic | Space: object requires documentation | |
260 | 387 | Level '1' for this field only possible for the first characteristic | ||
261 | 388 | The selection formula does not exist in formula table 890 | ||
262 | 389 | Set variable & does not exist | ||
263 | 390 | Cell & has an invalid row address | ||
264 | 391 | Cell & has an invalid column address | ||
265 | 392 | Row & in key figure block & does not contain any data | ||
266 | 393 | Set & contains a formula | ||
267 | 394 | & is not a set variable | ||
268 | 395 | Set & (variable &) has been changed | ||
269 | 396 | Parallel report & is used in report group & | ||
270 | 397 | No data selected for row block & | ||
271 | 398 | Report & & is used in report group & | ||
272 | 399 | Report & & is used in parallel report & | ||
273 | 400 | Enter a name that is not already being used | ||
274 | 401 | Reference program & does not exist | ||
275 | 402 | Report &1, Column block &2: Invalid operand &3 in formula | ||
276 | 403 | You are changing a report group of user & | ||
277 | 404 | Report &1, Column block &2: Formula cannot be evaluated ( &3 ) | ||
278 | 405 | Include at least one object in report group & | ||
279 | 406 | Enter a report group | ||
280 | 407 | Enter a report group for library & | ||
281 | 408 | Report group & already exists | ||
282 | 409 | Report group & does not exist. | ||
283 | 410 | Characteristic & cannot be combined with key figures | Space: object requires documentation | |
284 | 411 | Report group name & is not possible | ||
285 | 412 | Report & & does not exist. | ||
286 | 413 | Parallel report & & does not exist | ||
287 | 414 | Report group does not contain any tables to be selected | ||
288 | 415 | Save first | Space: object requires documentation | |
289 | 416 | You do not have authorization to reselect data | Space: object requires documentation | |
290 | 417 | Specify either library or report group to be copied | ||
291 | 418 | The report group is already being edited by user & | ||
292 | 419 | The report does not belong to the selected variation area | Space: object requires documentation | |
293 | 420 | No reports have been outputted | ||
294 | 421 | *--------- Selection/Output messages -----------------------------------* | ||
295 | 422 | Position cursor on column first | ||
296 | 423 | Select block first | ||
297 | 424 | Selection exceeds row/column margin | ||
298 | 425 | Function cannot be executed (receiver report set is invalid) | ||
299 | 426 | Position cursor on row first | ||
300 | 427 | The receiver report set does not contain any reports | ||
301 | 428 | Global company & not defined in subgroup & | ||
302 | 429 | The receiver report set does not contain reports that can be called up | ||
303 | 430 | Position cursor first on section | Space: object requires documentation | |
304 | 431 | Format & is not possible for parallel report & | ||
305 | 432 | Regenerate & (Report Writer changed) | ||
306 | 433 | Value & does not exist in the variation set & | ||
307 | 434 | Set & does not exist in the variation set & | ||
308 | 435 | Name & does not exist | ||
309 | 436 | You are deleting all entries & & | ||
310 | 437 | Enter level smaller or equal to & | ||
311 | 438 | No appropriate selection entries exist | ||
312 | 439 | Set & is not in the variation range for characteristic & | ||
313 | 440 | Page length of report & is too small (at least &) | ||
314 | 441 | Page width of report & is too small (at least &) | ||
315 | 442 | Selection data not found | ||
316 | 443 | Different group currencies for ledger & and & | ||
317 | 444 | Different local currencies for global company & and & | ||
318 | 445 | Entry & & & & does not exist in currency table | ||
319 | 446 | Enter a to-level that is greater than the from-level | ||
320 | 447 | Enter a valid output medium | ||
321 | 448 | Enter '0' or '1' as output format | ||
322 | 449 | Output media '0' and '3' are only possible with format '0' | ||
323 | 450 | Process report in the background (volume of data is too great) | ||
324 | 451 | Function code does not exist in the system | Space: object requires documentation | |
325 | 452 | Spool number & does not exist | ||
326 | 453 | LST authorization for the specified spool number does not exist | ||
327 | 454 | Selected report row does not exist | ||
328 | 455 | Reports of the Rel. & and & are not compatible | ||
329 | 456 | Function cannot be executed for formula lines or key figure blocks | ||
330 | 457 | Position cursor in window | ||
331 | 458 | Positioning with a logical column is not possible | ||
332 | 459 | *-------- Further messages for Report Writer transactions --------------* | ||
333 | 460 | Report & & has not been changed | ||
334 | 461 | Library & has been saved | ||
335 | 462 | Library & has not been changed | ||
336 | 463 | No values were found in the selected interval | ||
337 | 464 | The library is being edited by another user | ||
338 | 465 | Characteristic & is already used in a row | ||
339 | 466 | Characteristic & is already used in a column | ||
340 | 467 | Characteristic & is already used in a selection set | ||
341 | 468 | The specified language does not exist | ||
342 | 469 | Library &1: Key figure &2 in set &3 is not allowed | Space: object requires documentation | |
343 | 470 | Report & & has been saved | ||
344 | 471 | Characteristic & does not exist in library & | ||
345 | 472 | Standard layout & does not exist. | ||
346 | 473 | Parallel report & has been saved | ||
347 | 474 | Parallel report & has not been changed | ||
348 | 475 | Standard layout & has been saved | ||
349 | 476 | Standard layout & has not been changed | ||
350 | 477 | Enter a width of max. 253 characters | ||
351 | 478 | Standard layout & already exists | ||
352 | 479 | You must not change standard layout SAP | ||
353 | 480 | Unit width and right border require a column width >= & | ||
354 | 481 | Library & has been deleted | ||
355 | 482 | Parallel report & has been deleted | ||
356 | 483 | Report & has been deleted | ||
357 | 484 | Standard layout & has been deleted | ||
358 | 485 | The standard layout is being edited by another user | ||
359 | 486 | Standard layout SAP cannot be deleted | ||
360 | 487 | You are changing a standard layout of user & | ||
361 | 488 | Report & does not exist in target library & | ||
362 | 489 | Report group & has been deleted | ||
363 | 490 | Report group & has not been changed | ||
364 | 491 | Report group & has been saved | ||
365 | 492 | Symbolic name & is defined several times | ||
366 | 493 | Table & is not installed in Report Writer. | ||
367 | 494 | No free report group is currently available (repeat function) | ||
368 | 495 | System error: Standard layout SAP is not available | ||
369 | 496 | Determine column coordinate first | ||
370 | 497 | The column coordinate cannot be deleted | ||
371 | 498 | Set &: temporary sets cannot be displayed | ||
372 | 499 | No report documentation available | ||
373 | 500 | No documentation for this report group | Space: object requires documentation | |
374 | 501 | The row is used in a row formula | ||
375 | 502 | The row with number & does not exist | ||
376 | 503 | Operand & points to a row formula | ||
377 | 504 | Operand & points to a key figure block | ||
378 | 505 | The formula contains invalid characters | ||
379 | 506 | The syntax in the formula is incorrect | ||
380 | 507 | The row formula does not contain any errors | ||
381 | 508 | Correct the formula | ||
382 | 509 | Row &: Totals level 1 is suppressed | ||
383 | 510 | Row & is inactive | ||
384 | 511 | All the parameters have been reset to the standard layout | ||
385 | 512 | The report already contains a selection set for characteristic & | ||
386 | 513 | The highest level is already displayed | ||
387 | 514 | The lowest level is already displayed | ||
388 | 515 | The first object in the current level is already displayed | ||
389 | 516 | The last object in the current level is already displayed | ||
390 | 517 | The key figure block does not contain any row & | ||
391 | 518 | Key figure block does not contain any column & | ||
392 | 519 | Threshold value defined (&1 rows) | ||
393 | 520 | Enter a reference column between 1 and &1 | ||
394 | 521 | You should either store or display your report | ||
395 | 522 | The row block &1 does not have type 'Set' | ||
396 | 523 | Threshold value condition deleted | ||
397 | 524 | Report was printed (spool request number &1) | ||
398 | 525 | Report section sorted according to column &1 | ||
399 | 526 | Sorting removed in current section | ||
400 | 527 | Do not select formula columns only | ||
401 | 528 | Row block no. &: set contains intervals when form printout is active | ||
402 | 529 | Layout: zero rows are hidden | ||
403 | 530 | Layout: zero columns are hidden | ||
404 | 531 | The report contains inactive columns | ||
405 | 532 | Row block no. &: Key figures and formula lines are not exported | ||
406 | 533 | Row blocks &1 and &2 do not have the same structure | ||
407 | 534 | Row block no. &2: the suppress indicator is active in set &1 | ||
408 | 535 | Row block no. &2: Characteristic &1 has a positive level of detail | ||
409 | 536 | Column block no. & does not contain a key figure set | Space: object requires documentation | |
410 | 537 | Column block no. &: Key figure set contains formulas | Space: object requires documentation | |
411 | 538 | Column block no. &: Key figure set has an additional set | Space: object requires documentation | |
412 | 539 | Selection set & is not a basic set or a single-dimension set | ||
413 | 540 | Field &, selection set & does not specific a single value | ||
414 | 541 | Selection set &:Variation of the selection from-level unequal to to-level | ||
415 | 542 | The report group contains more than one report | ||
416 | 543 | & records have been transferred | ||
417 | 544 | Errors occurred during the data transfer | ||
418 | 545 | No data have been transferred | ||
419 | 546 | Error when reading table & | ||
420 | 547 | A single value has not been specified for characteristic & | ||
421 | 548 | *** Report group & *** | ||
422 | 549 | Report group & contains no errors | ||
423 | 550 | *--------- Further selection/output messages ---------------------------* | ||
424 | 551 | No data exists for your selection | ||
425 | 552 | A report could not be output | ||
426 | 553 | Text variable & could not be replaced | ||
427 | 554 | Position the cursor on a report row | ||
428 | 555 | Report exported to file & on presentation server | ||
429 | 556 | Report could not be exported | ||
430 | 557 | The passwords do not correspond | ||
431 | 558 | Password incorrect | ||
432 | 559 | The password has been deleted | ||
433 | 560 | The password has been reset | ||
434 | 561 | Set & does not contain any entries | ||
435 | 562 | Set & in set & does not contain any entries | ||
436 | 563 | Variation range for characteristic & in report & is not possible | ||
437 | 564 | Key figure & has been changed (regenerate report group) | Space: object requires documentation | |
438 | 565 | Report group is being regenerated (key figure & changed) | Space: object requires documentation | |
439 | 566 | Additional set & has been changed (regenerate report group) | ||
440 | 567 | Report group is being regenerated (change to additional set &) | ||
441 | 568 | An output file is not defined for report & | ||
442 | 569 | You cannot export to the presentation server in background processing | ||
443 | 570 | Report & does not support language & | ||
444 | 571 | Standard layout & has been changed (regenerate report group) | ||
445 | 572 | Report group is being regenerated (standard layout & changed) | ||
446 | 573 | Layout settings for report & & have been saved | ||
447 | 574 | Layout settings for & & saved and blocked for maintenance | ||
448 | 575 | Row is marked | ||
449 | 576 | You cannot import from the presentation server in background processing | ||
450 | 577 | You cannot export to the presentation server in background processing | ||
451 | 578 | Print parameters: Number of columns too small | ||
452 | 579 | The data must be saved permanently | ||
453 | 580 | Enter either group or single value | ||
454 | 581 | At least one entry required | ||
455 | 582 | Group $ does not exist | ||
456 | 583 | Error $ during the generation of the temporary object number set | ||
457 | 584 | Enter a group before activating the breakdown group function | ||
458 | 585 | Messages are defined | ||
459 | 586 | No messages are defined | ||
460 | 587 | No authorization for &1 of &2 read records | ||
461 | 588 | DDE connection to Excel has been interrupted (error code &) | ||
462 | 589 | The receiver type "&" is not supported | ||
463 | 590 | The report could not be sent (error code &) | ||
464 | 591 | There is no data saved under the name & | ||
465 | 592 | Layout settings saved | Space: object requires documentation | |
466 | 593 | Layout settings could not be saved | Space: object requires documentation | |
467 | 594 | Layout settings saved and blocked for maintenance | ||
468 | 595 | Report data have been selected | ||
469 | 596 | The page on the far left is already being displayed | Space: object requires documentation | |
470 | 597 | The page on the far right is already being displayed | Space: object requires documentation | |
471 | 598 | Enter a name not already present | ||
472 | 599 | Row texts were truncated. | ||
473 | 600 | *-------- Report Writer (600-650) --------------------------------------* | ||
474 | 601 | & & does not contain any data pages. | ||
475 | 602 | All logical columns have been suppressed | ||
476 | 603 | The list was issued on spool dataset & | ||
477 | 604 | No selection data exists for the report group | ||
478 | 605 | List is empty (function cannot be executed) | ||
479 | 606 | Select one format | ||
480 | 607 | No selection data selected for the report group | ||
481 | 608 | Standard layout tables & are inconsistent | ||
482 | 609 | No sender field is defined for the field & in table & | ||
483 | 610 | Report group is being regenerated (change set/var. &) | Space: object requires documentation | |
484 | 611 | Report group is being regenerated (change to report &) | ||
485 | 612 | Report group is being regenerated (change to library &) | Space: object requires documentation | |
486 | 613 | Report group is being regenerated (change to the definition) | ||
487 | 614 | Report group is being regenerated (change to Report Writer programs) | ||
488 | 615 | Set & has been changed (regenerate report group) | Space: object requires documentation | |
489 | 616 | Report & has been changed (Regenerate report group) | ||
490 | 617 | Library & has been changed (please regenerate) | Space: object requires documentation | |
491 | 618 | The report group has been changed (please regenerate) | ||
492 | 619 | The selected area cannot be graphically displayed. | Space: object requires documentation | |
493 | 620 | Enter either a group or values for '&1' | Space: object requires documentation | |
494 | 621 | Only select within one row block | ||
495 | 622 | Cursor position is invalid | ||
496 | 623 | Mark end of block | ||
497 | 624 | Block is marked | ||
498 | 625 | Block markings have been deleted | ||
499 | 626 | You have not entered a file name | ||
500 | 627 | File & could not be opened | ||
501 | 628 | Report output to file & (application server &) | ||
502 | 629 | Enter an output file | ||
503 | 630 | Parallel reports can only be output in text format | ||
504 | 631 | Cursor position is invalid | ||
505 | 632 | Column texts for key figure blocks cannot be selected | ||
506 | 633 | No valid master data for characteristic '&' | ||
507 | 634 | Reports output to spool | ||
508 | 635 | Window length & is too small (at least & rows) | ||
509 | 636 | Window width & is too small (at least & columns) | ||
510 | 637 | Report group will be regenerated (data remains) | ||
511 | 638 | Generated version of report group & is no longer up-to-date | ||
512 | 639 | No group currency unit found for ledger & | ||
513 | 640 | No valid exchange rate for currency translation from & to & | Space: object requires documentation | |
514 | 641 | Unit not found for currency & (ledger &) | ||
515 | 642 | Selected data saved (name: '&') | ||
516 | 643 | Set & does not exist | Space: object requires documentation | |
517 | 644 | Set & for table & must be created for field & | ||
518 | 645 | The name '&' cannot be used for the saved data | ||
519 | 646 | A list cannot be displayed for the entered set & | ||
520 | 647 | A list cannot be displayed for the entered single value & | ||
521 | 648 | Invalid graphics parameter | ||
522 | 649 | Result too large in formula evaluation | ||
523 | 650 | No currency unit found for global company & | ||
524 | 651 | *-------- Report Writer messages "Check report" (651-699) --------------* | ||
525 | 652 | The currency definition field & does not exist | ||
526 | 653 | No row defined | ||
527 | 654 | No active column defined | ||
528 | 655 | Characteristic & does not exist | ||
529 | 656 | Set & does not contain any entries | ||
530 | 657 | Set & in set & does not contain any entries | ||
531 | 658 | Row & contains formulas in more than one characteristic | ||
532 | 659 | Selection formula & is not defined | ||
533 | 660 | Charateristic & is used more than once in set & | ||
534 | 661 | Characteristic & (column &) does not exist in the library | ||
535 | 662 | Characteristic & (selection) does not exist in the library | ||
536 | 663 | Characteristic & is used repeatedly | ||
537 | 664 | Characteristic & does not exist in the library | ||
538 | 665 | The key figure set is the selection set (only one entry is possible) | Space: object requires documentation | |
539 | 666 | Table & is not installed in Report Writer. | ||
540 | 667 | A key figure set does not exist | Space: object requires documentation | |
541 | 668 | Row &: A key figure set does not exist | Space: object requires documentation | |
542 | 669 | Column &: A key figure set does not exist | Space: object requires documentation | |
543 | 670 | Characteristic & missing from report | Space: object requires documentation | |
544 | 671 | In row &, one set is missing for period field & (&) | ||
545 | 672 | Characteristic & (&) is missing from a column in section & | Space: object requires documentation | |
546 | 673 | &1 in key figure set &2 (row &3) does not exist | Space: object requires documentation | |
547 | 674 | &1 in key figure set &2 (column &3) does not exist | Space: object requires documentation | |
548 | 675 | &1 in key figure set &2 (selection) does not exist | Space: object requires documentation | |
549 | 676 | In row &, characteristic & is missing | ||
550 | 677 | Characteristic & is missing from a column in section & | Space: object requires documentation | |
551 | 678 | Characteristic & is not possible | ||
552 | 679 | Cell & in set & (row &) is not defined | ||
553 | 680 | Cell & in set & (column &) is not defined | ||
554 | 681 | Set variables cannot be used in a column | ||
555 | 682 | The period field cannot be defined as a set variable | ||
556 | 683 | The data field cannot be defined as a set variable | ||
557 | 684 | Set variable & contains a formula | ||
558 | 685 | Report & of library & is already being edited | ||
559 | 686 | Parallel report & of library & is already being edited | ||
560 | 687 | The key figure cell & has not yet been defined | ||
561 | 688 | Row formula with statistical key figure not possible | ||
562 | 689 | The characteristic &1 does not exist in report | ||
563 | 690 | *** Report & *** | ||
564 | 691 | Report & does not contain any errors | ||
565 | 692 | Set variable &: Default set & contains value variable | ||
566 | 693 | File name & invalid | ||
567 | 694 | Variation of the selection is not possible in parallel reports | ||
568 | 695 | Cell & addresses an invalid row/column combination | ||
569 | 696 | Row block & does not have any active columns | ||
570 | 697 | A column formula cannot be evaluated | ||
571 | 698 | A check indicator is selected in set & | ||
572 | 699 | You can only use characteristic & in the selection. | ||
573 | 700 | *---------- Control table maintenance ---------------------------------- | ||
574 | 701 | End of page has been reached | ||
575 | 702 | Beginning of page has been reached | ||
576 | 703 | Field & in table & does not exist | ||
577 | 704 | The field &2 does not exist in the Report Writer table &1 | ||
578 | 705 | Start conversion of table T804D | Space: object requires documentation | |
579 | 706 | Conversion of table T804D successfully completed | Space: object requires documentation | |
580 | 707 | Variable & has been changed (regenerate report group) | Space: object requires documentation | |
581 | 720 | *_________ Error messages from the Check_report (2) | Space: object requires documentation | |
582 | 721 | Characteristic & used more than once in the same row/column block. | Space: object requires documentation | |
583 | 730 | The maximum number of line (&1) exceeded! | Space: object requires documentation | |
584 | 734 | *--------- Error Messages: Archiving of Report Writer ------------------* | The short text describes the object sufficiently | |
585 | 735 | No suitable archiving object found | Space: object requires documentation | |
586 | 750 | *---------- Table maintenance key figure sets (T804F) ------------------* | Space: object requires documentation | |
587 | 751 | The new entry does not comply with the naming convention | ||
588 | 752 | The basic key figure &1 entered for table &2 is not defined | Space: object requires documentation | |
589 | 753 | Set & entered for table & does not exist | ||
590 | 754 | Key figure sets are not allowed as additional sets | Space: object requires documentation | |
591 | 755 | Multi-dimension sets with key fig.sets are not allowed as additional sets | Space: object requires documentation | |
592 | 756 | You cannot delete key figure & | Space: object requires documentation | |
593 | 757 | Key figure & is being used | Space: object requires documentation | |
594 | 758 | Key figure & has been deleted | Space: object requires documentation | |
595 | 759 | Cursor position is invalid | ||
596 | 760 | You cannot change key figure & | Space: object requires documentation | |
597 | 761 | Key figure & is not used | Space: object requires documentation | |
598 | 762 | Key figures not used are displayed inversely | Space: object requires documentation | |
599 | 763 | No key figures have yet been defined for table & | Space: object requires documentation | |
600 | 764 | Key figure &2 for table &1 does not exist | Space: object requires documentation | |
601 | 765 | Error while changing key figure &2 for table &1. | Space: object requires documentation | |
602 | 766 | Key figure &2 for table &1 already exists. | Space: object requires documentation | |
603 | 767 | Name & for a key figure is reserved for SAP. | Space: object requires documentation | |
604 | 768 | Processing terminated | Space: object requires documentation | |
605 | 769 | Key figure &1: Additional set &2 belongs to another table | Space: object requires documentation | |
606 | 770 | Key figure &1: Basic key figure &2 for table &3 not found | Space: object requires documentation | |
607 | 771 | Key figure &1: Additional set &2 not found | Space: object requires documentation | |
608 | 772 | Transport with generic key not possible for &1 | Space: object requires documentation | |
609 | 773 | Transport with generic key &1 not possible | Space: object requires documentation | |
610 | 774 | Report group &1: Report &2 does not exist | Space: object requires documentation | |
611 | 775 | Report &1: Standard layout &2 does not exist | Space: object requires documentation | |
612 | 776 | Program or report group "&" is an invalid value | ||
613 | 777 | Assign a set ID | ||
614 | 778 | Position the cursor on a report field | ||
615 | 779 | Report set & does not exist | ||
616 | 780 | The set cannot be changed | ||
617 | 781 | Enter a status | ||
618 | 782 | Report set & does not match table & | ||
619 | 783 | No errors found | ||
620 | 784 | Reports of type program must be registered | ||
621 | 785 | Assign a receiver report to the report | ||
622 | 786 | Please use the new line item report RGUGLS12 | ||
623 | 787 | Possible entries pushbutton is only supported for the presentation server | ||
624 | 788 | Application does not support automatic sending | Space: object requires documentation | |
625 | 789 | No receiver could be determined for report &1 | Space: object requires documentation | |
626 | 790 | Output to Excel not possible in multiple selection. | Space: object requires documentation | |
627 | 791 | MS Excel Link could not be installed (rc = &1, see long text) | Space: object requires documentation | |
628 | 792 | Library &1: Default set &2 does not exist | Space: object requires documentation | |
629 | 793 | Report &1: Library &2 does not exist | Space: object requires documentation | |
630 | 794 | Report &1 &2: Set &3 either does not exist or is not suitable | Space: object requires documentation | |
631 | 795 | Report &1 &2: Variable &3 either does not exist or is not suitable | Space: object requires documentation | |
632 | 796 | Object &1 &2 is in the customer namespace | Space: object requires documentation | |
633 | 800 | *-----------Report maintenance------------------------------------------* | Space: object requires documentation | |
634 | 801 | First enter a set. | Space: object requires documentation | |
635 | 802 | The selected set does not match the table in report. | Space: object requires documentation | |
636 | 803 | Enter a suitable set. | Space: object requires documentation | |
637 | 804 | Only use multi-sets and key figure sets for table &1. | Space: object requires documentation | |
638 | 805 | Only use variables valuable to sets in the selection definition. | Space: object requires documentation | |
639 | 806 | Set & was created. | Space: object requires documentation | |
640 | 807 | Set cannot be used in &1: | Space: object requires documentation | |
641 | 808 | Multiple use of key figure sets not permitted | Space: object requires documentation | |
642 | 811 | Section contains rows. For this reason, it cannot be deleted | Space: object requires documentation | |
643 | 812 | The first section cannot be merged with the preceding section. | Space: object requires documentation | |
644 | 813 | Place the cursor on the first row of a section. | Space: object requires documentation | |
645 | 814 | The section cannot be divided at the first row of the section | Space: object requires documentation | |
646 | 815 | The sections have different definitions | Space: object requires documentation | |
647 | 816 | Enter a summation level. | Space: object requires documentation | |
648 | 817 | Enter a column number. | Space: object requires documentation | |
649 | 818 | Format group was copied | Space: object requires documentation | |
650 | 819 | Only digits are permitted for the summation level | The short text describes the object sufficiently | |
651 | 830 | *___________ Authorizations ___________________________________________* | Space: object requires documentation | |
652 | 831 | The report '&2' is incomplete | Space: object requires documentation | |
653 | 843 | You do not have authorization for these selection criteria | Space: object requires documentation | |
654 | 844 | You do not have authorization to display report &. | ||
655 | 845 | You do not have authorization to generate a report group | ||
656 | 846 | You do not have authorization to select | ||
657 | 847 | You do not have authorization to output | ||
658 | 848 | You do not have authorization to use the multiple selection | ||
659 | 849 | You do not have authorization for background processing | ||
660 | 850 | You do not have authorization to display the selected data. | ||
661 | 851 | You do not have authorization for displaying key figures | Space: object requires documentation | |
662 | 852 | You do not have authorization for maintaining key figures | Space: object requires documentation | |
663 | 860 | *------ Error messages for report texts (function group GRWR): 861-899 | ||
664 | 861 | The clipboard is empty | ||
665 | 862 | Overlap with a text variable or a frame | ||
666 | 863 | Delete the frame first | ||
667 | 864 | The text has been saved | ||
668 | 865 | The width of the text minus the left and right margin must be > 0 | ||
669 | 866 | Select the opposite corner of the frame | ||
670 | 867 | The height of the symbol must be at least 1 | ||
671 | 868 | The width of the symbol must be at least 1 | ||
672 | 869 | The text variable has been inserted in shortened form | ||
673 | 870 | Report &1/&2 &3: Text has been converted | ||
674 | 871 | Report &/& &: No SAPscript text found | ||
675 | 872 | Report &/& &: Text has already been converted | ||
676 | 873 | Report &/& &: Error when saving the converted text | ||
677 | 874 | Report &/& &: Report is being edited by another user | ||
678 | 875 | Maintain the text in master language '&1' | ||
679 | 876 | Data for selected report groups has already been deleted | The short text describes the object sufficiently | |
680 | 877 | Data in GRRT for the selected report groups have been deleted | The short text describes the object sufficiently | |
681 | 878 | Do not select more than two entries for the comparison | The short text describes the object sufficiently | |
682 | 879 | This program can only be performed by FI-SL experts | The short text describes the object sufficiently | |
683 | 890 | *______ Error messages in the layout parameters (GRWF) | Space: object requires documentation | |
684 | 891 | Enter a column number. | Space: object requires documentation | |
685 | 892 | Column width must be between &1 and &2 characters! | Space: object requires documentation | |
686 | 895 | Multiple use of key figure sets not permitted | Space: object requires documentation | |
687 | 899 | You are not allowed to import into the development system | ||
688 | 900 | * Error messages: Help reports for Report Writer * | ||
689 | 901 | File name & invalid | ||
690 | 902 | File & is not a transport file | ||
691 | 903 | Place the cursor on a valid line | ||
692 | 904 | Select the objects to be processed | ||
693 | 905 | Choose a different source client | Space: object requires documentation | |
694 | 906 | Client & does not exist | ||
695 | 907 | No authorization to copy from other clients | ||
696 | 908 | Program & is not yet used | ||
697 | 909 | Program & is not used | ||
698 | 910 | Program & does not exist | ||
699 | 911 | Status of all report groups set at 'Must be regenerated' | ||
700 | 912 | Internal error occurred. Error message: | ||
701 | 913 | Job for import of references created. Job name : & | ||
702 | 914 | The program name must begin with "Z" | ||
703 | 915 | Enter a valid program name | ||
704 | 916 | Enter a development class reserved for customers | ||
705 | 917 | Internal error: Client & cannot be converted | ||
706 | 918 | Enter a valid summary table | ||
707 | 919 | No document found | Space: object requires documentation | |
708 | 920 | Standard reports already exist for the tables selected | Space: object requires documentation | |
709 | 921 | You cannot display the layout for Report Writer reports | Space: object requires documentation | |
710 | 950 | *------- Error messages: Formula variable processing in selection ------* | ||
711 | 951 | You cannot read the stored set structures | ||
712 | 952 | Undefined error during variable evaluation of & | ||
713 | 961 | Report cannot be displayed with Office integration | Space: object requires documentation |
History
Last changed on/by | 20140121 | SAP | |
SAP Release Created in |