SAP ABAP Message Class GA (Allocations)
Basic Data
Hierarchy
☛
BBPCRM (Software Component) BBPCRM
⤷
CRM (Application Component) Customer Relationship Management
⤷
CRM_APPLICATION (Package) All CRM Components Without Special Structure Packages
⤷
KALC (Package) Cost Accounting allocations RK-S

⤷

⤷

⤷

Attributes
Message class | ![]() |
GA |
Short Description | ![]() |
Allocations |
Changed On | ![]() |
20110908 |
Last Changed At | ![]() |
171450 |
Messages
# | Message | Message Short Text | Documentation status | Authorization check |
---|---|---|---|---|
1 | ![]() |
*********** allocations GL ************************************ | Space: object requires documentation | |
2 | ![]() |
There are no change documents | ||
3 | ![]() |
The cycle specified has not been created | ||
4 | ![]() |
The cycle specified has already been created | ||
5 | ![]() |
System error: Table 811T is not maintained | ||
6 | ![]() |
Serious internal system error & & & & | Space: object requires documentation | |
7 | ![]() |
The specified cycle has not been created | ||
8 | ![]() |
Postings exist for cycle &, starting date & | ||
9 | ![]() |
Cycle &, starting date & has been deleted | ||
10 | ![]() |
System error: Error while reading Table & | ||
11 | ![]() |
The cycle specified uses another allocation method | ||
12 | ![]() |
The cycle specified has another Act/Plan indicator | ||
13 | ![]() |
System error when storing cycle &, start date &. | Space: object requires documentation | |
14 | ![]() |
Cycle &, starting date & has been saved | ||
15 | ![]() |
No valid sender entries exist | ||
16 | ![]() |
No valid receiver entries exist | ||
17 | ![]() |
You cannot change the combination fields | ||
18 | ![]() |
No combination fields because no sender values from data base | ||
19 | ![]() |
No combination fields because no receiver values from data base | ||
20 | ![]() |
You can process up to & combinations | ||
21 | ![]() |
No further segment exists | ||
22 | ![]() |
System error: No new segment could be generated | ||
23 | ![]() |
The name of the segment already exists | ||
24 | ![]() |
System error: No selection fields for new segment | ||
25 | ![]() |
No segments have yet been created | ||
26 | ![]() |
Segment & in cycle & & does not exist | ||
27 | ![]() |
You can only select a maximum of 10 criteria. | Space: object requires documentation | |
28 | ![]() |
The total percentage must not exceed 100% | ||
29 | ![]() |
System error: Error in reloading segment & | ||
30 | ![]() |
The segment & to be deleted does not exist | ||
31 | ![]() |
The set & specified has not been created | ||
32 | ![]() |
The set & specified belongs to another field | ||
33 | ![]() |
The data field group & has not been created | ||
34 | ![]() |
Enter either single values (from-to) or a set | ||
35 | ![]() |
The "From" value is not smaller than the "To" value | Space: object requires documentation | |
36 | ![]() |
Enter the name of the set | ||
37 | ![]() |
Set & has already been created | ||
38 | ![]() |
You are not authorized to generate set & | ||
39 | ![]() |
System error: Error in maintenance of set & | ||
40 | ![]() |
Position the cursor on a set field | ||
41 | ![]() |
You are not permitted to enter a set for the & field | ||
42 | ![]() |
Segment & has been deleted from the application | Space: object requires documentation | |
43 | ![]() |
Enter values for the field "&" | ||
44 | ![]() |
Cost element & is not an assessment cost element | ||
45 | ![]() |
Version & does not exist | ||
46 | ![]() |
No valid assessment cost elements have been created | ||
47 | ![]() |
Position the cursor on a group field | ||
48 | ![]() |
No versions defined for controlling area & | ||
49 | ![]() |
Version & is not allowed for actual postings | ||
50 | ![]() |
Version & is not allowed for planning | ||
51 | ![]() |
System information: The function is not yet implemented | ||
52 | ![]() |
User & is locking the cycle | ||
53 | ![]() |
Assessment cost element & is not valid for the aggregate period | ||
54 | ![]() |
No cycle found | ||
55 | ![]() |
Enter a starting date | ||
56 | ![]() |
You are already locking the cycle | ||
57 | ![]() |
The sender rule & you entered is not allowed | ||
58 | ![]() |
The receiver rule & you entered is not allowed | ||
59 | ![]() |
Cycle & has not been created in & & | ||
60 | ![]() |
The reference cycle specified does not exist | ||
61 | ![]() |
The reference cycle specified has other allocation type | ||
62 | ![]() |
The reference cycle specified has another actual/plan indicator | ||
63 | ![]() |
To-date is smaller than From-Date | ||
64 | ![]() |
Printing carried out. | ||
65 | ![]() |
System error: Tables T811M and T811J differ | ||
66 | ![]() |
The reference cycle has not been created | ||
67 | ![]() |
The reference cycle has another allocation type | ||
68 | ![]() |
The reference cycle has another act/plan indicator | ||
69 | ![]() |
Do not enter over 100% for the sender | ||
70 | ![]() |
To-date of reference < from-date -> changed to from-date | ||
71 | ![]() |
Please enter sender portion > 0% | ||
72 | ![]() |
System error: Set name & has been deleted | ||
73 | ![]() |
The total sum of the parts may not exceed 99999.99 | Space: object requires documentation | |
74 | ![]() |
It is not possible to maintain group & | ||
75 | ![]() |
Cost centers and orders are not active in & | ||
76 | ![]() |
Cost centers are not active in & | ||
77 | ![]() |
Alternative fields are filled simulataneously. | ||
78 | ![]() |
Enter values for fields & & . | Space: object requires documentation | |
79 | ![]() |
Group & does not belong to controlling area &. | ||
80 | ![]() |
Group & does not belong to chart of accounts &. | ||
81 | ![]() |
Group & belongs to a different field | ||
82 | ![]() |
You are not permitted to enter a group for field & | ||
83 | ![]() |
Enter the name of the group | ||
84 | ![]() |
Group & already exists | ||
85 | ![]() |
You are not authorized to generate group & | ||
86 | ![]() |
System error: error during maintenance of group & | ||
87 | ![]() |
Group & does not exist | ||
88 | ![]() |
Controlling area & is not assigned to the operating concern. | ||
89 | ![]() |
Cost center cost assessment to CO-PA must be installed | ||
90 | ![]() |
Enter the controlling area first | ||
91 | ![]() |
You must enter at least one field | ||
92 | ![]() |
Value field & is not defined | ||
93 | ![]() |
CO area & and operating concern use different fiscal year variants | ||
94 | ![]() |
CO area & and operating concern have different currencies | ||
95 | ![]() |
Enter either single values (from x to y) or a group | ||
96 | ![]() |
All possible distribution fields are selected for the receivers | ||
97 | ![]() |
Fiscal year variant & is not defined | ||
98 | ![]() |
Printing has been carried out | ||
99 | ![]() |
System error: No acct assignment field found | ||
100 | ![]() |
System error: serious error during processing of a cycle | ||
101 | ![]() |
*** Process.transaction *** | ||
102 | ![]() |
Name & of the segment appears more than once | ||
103 | ![]() |
System error: Item & in the segment already exists | ||
104 | ![]() |
System error: No exit module pool exists for file & | ||
105 | ![]() |
Maintain number range for controlling area & transaction & | ||
106 | ![]() |
Controlling area & has not been created | ||
107 | ![]() |
More than one acct assignment field found. | ||
108 | ![]() |
Controlling area & is not valid for fiscal year & | ||
109 | ![]() |
No valid sender entries exist | ||
110 | ![]() |
No valid receiver entries exist | ||
111 | ![]() |
No segments have yet been created | ||
112 | ![]() |
Batch job & is scheduled for & | ||
113 | ![]() |
First install top-down planning for operating concern & | ||
114 | ![]() |
Deactivate the test run indicator | ||
115 | ![]() |
System error: Version not specified for plan assessment | ||
116 | ![]() |
System error: Version not specified for plan distribution | ||
117 | ![]() |
Profitability analysis is not active for controlling area & | ||
118 | ![]() |
No master record created for sender cost center/act. type &/& | ||
119 | ![]() |
Either set master data indicator or selection values | ||
120 | ![]() |
Indirect activity allocation: Serious system error act. type master rec. | ||
121 | ![]() |
No document data found for reversal | ||
122 | ![]() |
Only activity types/processes of category "indirect calculation" valid. | Space: object requires documentation | |
123 | ![]() |
Only activity types/processes of category "manual entry" valid. | Space: object requires documentation | |
124 | ![]() |
Receivers CCtr/act. type cannot be mixed with other types of receivers | ||
125 | ![]() |
Activity types set up without dependent cost centers as receivers | ||
126 | ![]() |
Indirect activity allocation: Serious system error cost elem. master rec. | ||
127 | ![]() |
No valid activity types created | ||
128 | ![]() |
No master record created for receiver cost center/activ. type &/& | ||
129 | ![]() |
Activity type & not of "indirect determination" category | ||
130 | ![]() |
Activity type & not of "manual entry" category | ||
131 | ![]() |
Assessment account & is not a valid account/cost element | ||
132 | ![]() |
Version & is not a delta version | ||
133 | ![]() |
Version & is a delta version | ||
134 | ![]() |
Sender activity type may not be "initial". | ||
135 | ![]() |
No receiver available. | ||
136 | ![]() |
No sender available. | ||
137 | ![]() |
Non-allocatable activity type & is not a valid sender activity type | ||
138 | ![]() |
No actual price indicator set for sender activity type & | ||
139 | ![]() |
Variants & were saved. | ||
140 | ![]() |
Variants & not available. | ||
141 | ![]() |
Values in activation indicator and entry readiness are contradictory. | ||
142 | ![]() |
Texts were not found. | ||
143 | ![]() |
System error in variant processing. | ||
144 | ![]() |
No variants created as yet. | ||
145 | ![]() |
Variants & not created for & . | ||
146 | ![]() |
No segment found in interval &1 to &2 for cycle &3, start date &4 | Space: object requires documentation | |
147 | ![]() |
Time interval & to & contains no periods. | ||
148 | ![]() |
Operating concern & is not assigned to a controlling area. | ||
149 | ![]() |
Formal cycle check was successful. | Space: object requires documentation | |
150 | ![]() |
Cycle check with &1 completed: For details see error log | Space: object requires documentation | |
151 | ![]() |
Plan allocation for order & in version & not allowed. | ||
152 | ![]() |
Plan allocation for WBS element & in version & not allowed. | ||
153 | ![]() |
Enter the cycle name and its start date. | Space: object requires documentation | |
154 | ![]() |
No segment found. | ||
155 | ![]() |
No fixed amounts are possible in cumulated allocation. | ||
156 | ![]() |
The sender percentage must equal 100% in cumulated allocation. | ||
157 | ![]() |
Indirect activity allocation: No valid sender entries exist. | ||
158 | ![]() |
Not all transaction texts available in language &1. | Space: object requires documentation | |
159 | ![]() |
Overrun error - the number of errors is too large. | ||
160 | ![]() |
Joint venture assessment/distribution not possible; inactive in CO area. | Space: object requires documentation | |
161 | ![]() |
Group &1 does not exist for profitability segment &3. | ||
162 | ![]() |
Error during ABAP list viewer callup. | Space: object requires documentation | |
163 | ![]() |
Version &1 is locked in fiscal year &2 in controlling area &3 | Space: object requires documentation | |
164 | ![]() |
Error when checking the lock for version &3 in fiscal year &1 | Space: object requires documentation | |
165 | ![]() |
Relevant version for transaction &1 and version &3 cannot be called | Space: object requires documentation | |
166 | ![]() |
Position cursor on an entry | Space: object requires documentation | |
167 | ![]() |
List contains no data | Space: object requires documentation | |
168 | ![]() |
Error when sorting the segment list | Space: object requires documentation | |
169 | ![]() |
Character string not found. | Space: object requires documentation | |
170 | ![]() |
Error when reading the cycle fields | Space: object requires documentation | |
171 | ![]() |
Enter values for fields & & . | ||
172 | ![]() |
A sender contains no values to be allocated | Space: object requires documentation | |
173 | ![]() |
"To" period too small for reversal of cumulative cycles | Space: object requires documentation | |
174 | ![]() |
The start period for cumulative processing must be the first period | Space: object requires documentation | |
175 | ![]() |
Choose a valid row | Space: object requires documentation | |
176 | ![]() |
Search was unsuccessful. | Space: object requires documentation | |
177 | ![]() |
No authorization for deleting change document for cycle &. | Space: object requires documentation | |
178 | ![]() |
Changing segment names causes problems during segment adjustment | Space: object requires documentation | |
179 | ![]() |
Cycle already executed in another version. | Space: object requires documentation | |
180 | ![]() |
Periodic reposting of revenues for revenue-recording orders/WBS elements. | Space: object requires documentation | |
181 | ![]() |
WBS element & is not a billing element. | Space: object requires documentation | |
182 | ![]() |
Statistical order & is not a valid sender in &. | Space: object requires documentation | |
183 | ![]() |
Statistical order & does not have an associated cost center for posting. | Space: object requires documentation | |
184 | ![]() |
Version & is not allowed. | Space: object requires documentation | |
185 | ![]() |
There is no segment in the buffer. | Space: object requires documentation | |
186 | ![]() |
You do not have the authorization to display valuation versions | Space: object requires documentation | |
187 | ![]() |
Creating set & was cancelled. | Space: object requires documentation | |
188 | ![]() |
Select a valid row | Space: object requires documentation | |
189 | ![]() |
Enter a valid value | Space: object requires documentation | |
190 | ![]() |
Segment was copied into buffer | Space: object requires documentation | |
191 | ![]() |
Master data check ended with messages: See the error log. | Space: object requires documentation | |
192 | ![]() |
No master data created for receiver business process &. | Space: object requires documentation | |
193 | ![]() |
No actual price indicator set for sender business process & | Space: object requires documentation | |
194 | ![]() |
Non-allocatable allocation category & is not a valid sender category. | Space: object requires documentation | |
195 | ![]() |
The sum of the percentage rates for the receiver is less than 100% | Space: object requires documentation | |
196 | ![]() |
Validation successfully created/deleted. | Space: object requires documentation | |
197 | ![]() |
Increased accuracy during iteration | Space: object requires documentation | |
198 | ![]() |
Segment correction already executed for cycle &1 | Space: object requires documentation | |
199 | ![]() |
No version specified for the plan cycle | Space: object requires documentation | |
200 | ![]() |
The sum of the values entered leads to a field overflow | Space: object requires documentation | |
201 | ![]() |
No fixed amounts/activity prices are possible with cumulative processing | Space: object requires documentation | |
202 | ![]() |
Sender percentage must amount to 100% with cumulative processing | Space: object requires documentation | |
203 | ![]() |
Enter either an assessment cost element or an allocation structure | Space: object requires documentation | |
204 | ![]() |
Enter either value fields or a PA transfer structure | Space: object requires documentation | |
205 | ![]() |
You have changed the currency and thereby the number of decimal places | Space: object requires documentation | |
206 | ![]() |
Background job & for check of the cycle run groups was released | Space: object requires documentation | |
207 | ![]() |
Enter either one total value field or one PA transfer structure | Space: object requires documentation | |
208 | ![]() |
Group & does not contain any entries | Space: object requires documentation | |
209 | ![]() |
Cycle run group check is not up-to-date | Space: object requires documentation | |
210 | ![]() |
Check the cycle run groups again with the System | Space: object requires documentation | |
211 | ![]() |
Use a valid substitution | Space: object requires documentation | |
212 | ![]() |
No substitution used | Space: object requires documentation | |
213 | ![]() |
Errors in automatic transport | Space: object requires documentation | |
214 | ![]() |
Select an existing layout | Space: object requires documentation | |
215 | ![]() |
No currencies found to be translated | Space: object requires documentation | |
216 | ![]() |
The amount in currency &1 could not be translated to euro | Space: object requires documentation | |
217 | ![]() |
Database change on table &1 could not be executed | Space: object requires documentation | |
218 | ![]() |
Receiver rule & is not allowed when entering an allocation structure | Space: object requires documentation | |
219 | ![]() |
No assignments of cycle run groups to cycles in fiscal year &1 | Space: object requires documentation | |
220 | ![]() |
Statistical WBS element & is not a valid sender in & | Space: object requires documentation | |
221 | ![]() |
Statistical WBS element & contains no cost center to be posted to | Space: object requires documentation | |
222 | ![]() |
Incompatible quantities were added together | Space: object requires documentation | |
223 | ![]() |
Variant &1 has not been created for organizational unit &2 | Space: object requires documentation | |
224 | ![]() |
Maintain fields &1 &2 | Space: object requires documentation | |
225 | ![]() |
Sender object &1 has been overcredited in segment &2 | Space: object requires documentation | |
226 | ![]() |
Error during database selection (table COEP) | Space: object requires documentation | |
227 | ![]() |
Cycle &1 is not available | Space: object requires documentation | |
228 | ![]() |
Background job & for formal cycle check released | Space: object requires documentation | |
229 | ![]() |
Segment rebooking not possible -> see note no. 327293 | Space: object requires documentation | |
230 | ![]() |
Key figure not present or else too long (max. 18 characters) | Space: object requires documentation | |
231 | ![]() |
The entry in the "Product" field is ignored | Space: object requires documentation | |
232 | ![]() |
Material &1 does not exist | Space: object requires documentation | |
233 | ![]() |
&1 | Space: object requires documentation | |
234 | ![]() |
Field &1 in not active in any scenario in ledger &2 | Space: object requires documentation | |
235 | ![]() |
'Cumulated' and 'Previous Periods' not possible at the same time | The short text describes the object sufficiently | |
236 | ![]() |
'Previous Periods' is only possible with a period | The short text describes the object sufficiently | |
237 | ![]() |
'Previous Periods' for cycle &1, &2 active with value &3 | The short text describes the object sufficiently | |
238 | ![]() |
Error when deriving the 'previous periods' (period &1, delta &2) | The short text describes the object sufficiently | |
239 | ![]() |
Period delta &1 is greater than the number of posting periods | Space: object requires documentation | |
240 | ![]() |
No allocation of quantities possible for plan dist. with delta update | Space: object requires documentation | |
241 | ![]() |
*** List of postings *** | ||
242 | ![]() |
No postings have been selected | ||
243 | ![]() |
*** Utility reports for allocation (error analysis, simulation, etc.). | ||
244 | ![]() |
Error in system information for table &. | ||
245 | ![]() |
Table & is not included in allocation. | ||
246 | ![]() |
Mandatory field & is not included in the field use (T811I). | ||
247 | ![]() |
Field use for mandatory field & is not maintained correctly (T811I). | ||
248 | ![]() |
Field & may not be included in the field use (T811I). | ||
249 | ![]() |
Remove sender field & from the field use (T811I). | ||
250 | ![]() |
No field of type "Account" is included in the field use (T811J). | ||
251 | ![]() |
Check the integrated master data for field &. | ||
252 | ![]() |
Choose another row. | ||
253 | ![]() |
No correct field groups have been maintained (T811J). | ||
254 | ![]() |
Use one field group type only (T811J). | ||
255 | ![]() |
Field group & is not maintained correctly (T811J). | ||
256 | ![]() |
Field group & is not available (T811H). | ||
257 | ![]() |
Use one data field type only for data control (T811H). | ||
258 | ![]() |
Data field & is not maintained correctly (T811H). | ||
259 | ![]() |
Data field & is not available (T811H). | ||
260 | ![]() |
The definition of field groups and data control does not match. | ||
261 | ![]() |
No correct data fields have been maintained (T811H). | ||
262 | ![]() |
Do not use field & on the cycle and segment levels at the same time. | ||
263 | ![]() |
Mark at least one row. | ||
264 | ![]() |
Not all the errors could be removed by the SAP System. | ||
265 | ![]() |
The customizing settings for allocation were corrected. | ||
266 | ![]() |
The customizing settings for allocation are formally correct. | ||
267 | ![]() |
Customizing entries were changed during data release. | ||
268 | ![]() |
Partner object update has not been activated for table & | Space: object requires documentation | |
269 | ![]() |
Field & is being used in cycle & (&). | ||
270 | ![]() |
Check control data for field & in the field usage. | ||
271 | ![]() |
Check indicator "Without summarization" for field &. | ||
272 | ![]() |
Structure &1 may have a maximum length of &2. | Space: object requires documentation | |
273 | ![]() |
Serious error in background processing: Incorrect business transaction. | Space: object requires documentation | |
274 | ![]() |
Serious error in background processing: Business transaction & unknown. | Space: object requires documentation | |
275 | ![]() |
Check results saved for cycle run group assignments. | Space: object requires documentation | |
276 | ![]() |
Entry & is not allowed. | Space: object requires documentation | |
277 | ![]() |
Inconsistencies in the field selection. | Space: object requires documentation | |
278 | ![]() |
Incorrect entry | Space: object requires documentation | |
279 | ![]() |
*** Cycle-independent messages (customizing for table &) | Space: object requires documentation | |
280 | ![]() |
Cycle & starting date & has not been created | ||
281 | ![]() |
Cycle &, starting date &, has a different allocation type. | ||
282 | ![]() |
Cycle &, starting date & has other actual/planned indicator | ||
283 | ![]() |
Cycle & has not been created | ||
284 | ![]() |
Select a row | ||
285 | ![]() |
The clipboard is empty | ||
286 | ![]() |
Cursor is positioned on an empty row | ||
287 | ![]() |
The To-period is smaller than the From-period | ||
288 | ![]() |
Cycle & is not valid on & | ||
289 | ![]() |
Cycle & occurs twice | ||
290 | ![]() |
Reversal completed with errors | ||
291 | ![]() |
Generation of the report & finished | ||
292 | ![]() |
No reversal because & has not run yet | ||
293 | ![]() |
Reversal finished, & records written | ||
294 | ![]() |
Not all cycles have the same database | ||
295 | ![]() |
Start period for cumulation is greater than from-period value | Space: object requires documentation | |
296 | ![]() |
& has already run, reversal will be started | ||
297 | ![]() |
System error: Entry in Table 811H missing | ||
298 | ![]() |
Reversal will be made in different posting period & & | Space: object requires documentation | |
299 | ![]() |
No cycle has been specified | ||
300 | ![]() |
& entries transferred to the clipboard | ||
301 | ![]() |
1 entry transferred to the clipboard | ||
302 | ![]() |
Activate either 'Update' or 'Detailed list' | ||
303 | ![]() |
Indirect activity allocation not allowed with posting; planning locked. | Space: object requires documentation | |
304 | ![]() |
Enter an allocation group | ||
305 | ![]() |
The report to be generated is locked for other processing | ||
306 | ![]() |
Enter a cycle | ||
307 | ![]() |
Cycle & is not valid for complete period | ||
308 | ![]() |
Cycle & is not valid for complete period | ||
309 | ![]() |
No selection possible | ||
310 | ![]() |
Position the cursor on a cycle | ||
311 | ![]() |
User & has locked & | ||
312 | ![]() |
Program names starting with AL. are reserved for allocations | ||
313 | ![]() |
The reversal has not been updated | ||
314 | ![]() |
Cycle & is not valid for complete period | ||
315 | ![]() |
No reversal made, because & (old) has not yet run | ||
316 | ![]() |
Reversal of & has been cancelled | ||
317 | ![]() |
The "Update" function is not yet possible | ||
318 | ![]() |
System error: Data cannot be reversed | ||
319 | ![]() |
Cycle & in controlling area & does not exist | ||
320 | ![]() |
Planning locked by user & | ||
321 | ![]() |
Posting periods must be longer than adjustment periods | Space: object requires documentation | |
322 | ![]() |
Reversal fiscal year cannot postdate posting fiscal year | ||
323 | ![]() |
Cycle in period &1 to &2, fiscal year &3, not yet posted. | Space: object requires documentation | |
324 | ![]() |
Segment reversal is closed (& records written). | ||
325 | ![]() |
Segment reversal for segment & has already occurred | Space: object requires documentation | |
326 | ![]() |
Cycle &, start date & is not an assessment/distribution/reposting cycle. | Space: object requires documentation | |
327 | ![]() |
No data records to post found during segment reversal. | ||
328 | ![]() |
A mixture of cumulative and non-cumulative cycles is not possible | Space: object requires documentation | |
329 | ![]() |
Cycle & & can not be performed in parallel | Space: object requires documentation | |
330 | ![]() |
& for periods & to & is already run. Correct period intervals. | Space: object requires documentation | |
331 | ![]() |
Please enter segments. | Space: object requires documentation | |
332 | ![]() |
Segment reversal cancelled with errors. | Space: object requires documentation | |
333 | ![]() |
Identical segment reversal for segment & has already been performed | Space: object requires documentation | |
334 | ![]() |
Segment reversal for object &1, cost element &2 is not possible | Space: object requires documentation | |
335 | ![]() |
Segment adjustment completed | Space: object requires documentation | |
336 | ![]() |
Cycle in period &1, fiscal year &2 not posted. | Space: object requires documentation | |
337 | ![]() |
Cycle & & contains dependent documents | Space: object requires documentation | |
338 | ![]() |
& has blocked allocation for ledger & and company code/business area & | Space: object requires documentation | |
339 | ![]() |
Reversal document number(2): & - & | Space: object requires documentation | |
340 | ![]() |
Cycle & & cannot be executed in parallel. | Space: object requires documentation | |
341 | ![]() |
Cycle & & cannot be started because run group & is locked. | Space: object requires documentation | |
342 | ![]() |
Run group & locked by user &. | Space: object requires documentation | |
343 | ![]() |
User &3 has locked &4 (cycle process group "no parallel capability") | Space: object requires documentation | |
344 | ![]() |
Cycles & & is locked by user & | Space: object requires documentation | |
345 | ![]() |
Dependent documents for cycle &1 &v2 can not be reversed. | Space: object requires documentation | |
346 | ![]() |
Cycle &1 &2 cannot be started as cycle run group &3 is locked | Space: object requires documentation | |
347 | ![]() |
Entry only relevant when reversing assessment | Space: object requires documentation | |
348 | ![]() |
Reversal of & has been cancelled | Space: object requires documentation | |
349 | ![]() |
Reversal fiscal year must not be older than posting fiscal year | Space: object requires documentation | |
350 | ![]() |
Reversal period must not be older than posting period | Space: object requires documentation | |
351 | ![]() |
Allocation for Period 0 is not allowed | The short text describes the object sufficiently | |
352 | ![]() |
****** Error Generation Allocation ******** | ||
353 | ![]() |
System error: Field group missing for computation of tracing factors | ||
354 | ![]() |
Only cycles for exactly one controlling area may be executed together. | ||
355 | ![]() |
System error : Read error in set & for Table & | ||
356 | ![]() |
No clear receiver defined in cycle & , start date & , segment & . | ||
357 | ![]() |
Non-specific sender definition in cycle & segment & | ||
358 | ![]() |
Set & is locked by another user. | Space: object requires documentation | |
359 | ![]() |
System error: Error in conversion generation | ||
360 | ![]() |
System error: The field & is not defined in table T811I | ||
361 | ![]() |
Generation of the report terminated | ||
362 | ![]() |
Generation of report & completed | ||
363 | ![]() |
Generation of report & contains errors | ||
364 | ![]() |
You are not authorized to delete set &. | Space: object requires documentation | |
365 | ![]() |
System error during set generation. | Space: object requires documentation | |
366 | ![]() |
System error: in table T811J | ||
367 | ![]() |
Error in table T811J, no entry exists for field &-& | ||
368 | ![]() |
System error: Assessment CElem incorrectly defined in T811I | ||
369 | ![]() |
System error: Error in table T811J | ||
370 | ![]() |
System error: Error in table T811J | ||
371 | ![]() |
Cycle has no valid segments | ||
372 | ![]() |
System error: Error in Table T811H/T811J | ||
373 | ![]() |
System error: Internal program data structures generated incorrectly | ||
374 | ![]() |
System error or customizing error: Read error in set & for table & | ||
375 | ![]() |
Customizing error: Field & cannot be passed on from sender to receiver | Space: object requires documentation | |
376 | ![]() |
Sets/groups are being converted. | Space: object requires documentation | |
377 | ![]() |
System error: Generated program rows too long. | Space: object requires documentation | |
378 | ![]() |
Syntax error during generation of run report. | Space: object requires documentation | |
379 | ![]() |
Customizing error: Business transaction groups are not current. | Space: object requires documentation | |
380 | ![]() |
Cycles have different settings for indicator "Transfer prices active". | Space: object requires documentation | |
381 | ![]() |
Field overflow in iteration | Space: object requires documentation | |
382 | ![]() |
Receiver &2/&1 invalid: Activity type &1 not planned for cost center &2 | Space: object requires documentation | |
383 | ![]() |
Periodic reposting of activity-dependent costs on CCtr/AtyType only | Space: object requires documentation | |
384 | ![]() |
No valid combinations found for ledger and company code | Space: object requires documentation | |
385 | ![]() |
No valid combinations found for ledger and company | Space: object requires documentation | |
386 | ![]() |
Company codes & and & cannot be processed together | Space: object requires documentation | |
387 | ![]() |
Companies & and & cannot be processed together | Space: object requires documentation | |
388 | ![]() |
Cross-company allocation is not supported | Space: object requires documentation | |
389 | ![]() |
The "Controlling area" field can only be used at header level | Space: object requires documentation | |
390 | ![]() |
Only one controlling area can be processed in the allocation | Space: object requires documentation | |
391 | ![]() |
No clearing account found for company codes & and & | Space: object requires documentation | |
392 | ![]() |
Cross-company code allocation only possible with partner-object update | Space: object requires documentation | |
393 | ![]() |
Enter an organizational unit in the header or as a sender | Space: object requires documentation | |
394 | ![]() |
Enter company code/company in all segments as the sender | Space: object requires documentation | |
395 | ![]() |
Begin the update of table T811U | Space: object requires documentation | |
396 | ![]() |
End the updating of table T811U | Space: object requires documentation | |
397 | ![]() |
Periodic reposting of activity-dep.costs only with CCtr/activity type | Space: object requires documentation | |
398 | ![]() |
Sender &2/&1 invalid, because activity type &1 not planned on CCtr &2 | Space: object requires documentation | |
399 | ![]() |
Cycle run group &1 for cycles in &2 not yet available | Space: object requires documentation | |
400 | ![]() |
Settlement unit occurs more than once | Space: object requires documentation | |
401 | ![]() |
****** Error Process Allocation ************ | ||
402 | ![]() |
Tracing base units not compatible | ||
403 | ![]() |
Document number: interval not found | ||
404 | ![]() |
Document number: range not found | ||
405 | ![]() |
Document number: Number range & not internal | ||
406 | ![]() |
Document number: Object & not found | ||
407 | ![]() |
Document number: Number in critical area (Object & sub-object &) | ||
408 | ![]() |
Document number: last number assigned (Object & sub-object & ) | ||
409 | ![]() |
System error: When reading set & table & | ||
410 | ![]() |
No valid receiver entries were found | ||
411 | ![]() |
No valid sender entries were found. | ||
412 | ![]() |
System error: Error in combination manager | ||
413 | ![]() |
System error: during period determination for currency transformation | ||
414 | ![]() |
System error: No exit found in the combination manager | ||
415 | ![]() |
The segment does not contain any senders. | ||
416 | ![]() |
No valid combinations were found | ||
417 | ![]() |
No sender values defined | ||
418 | ![]() |
No receiver tracing factors defined | ||
419 | ![]() |
The unit field & is not unique | ||
420 | ![]() |
No update performed due to an error | ||
421 | ![]() |
The segment is locked | ||
422 | ![]() |
A sender is credited by more than 100 % | ||
423 | ![]() |
Update of documents & to & is completed | Space: object requires documentation | |
424 | ![]() |
In period & quantity is not complete for & & | ||
425 | ![]() |
In segment &, the activity is incorrect for & & | ||
426 | ![]() |
System error: incorrect layout of internal tables | ||
427 | ![]() |
Use a correct document type | Space: object requires documentation | |
428 | ![]() |
Sender base in period & is 0; therefore, no allocation is possible | ||
429 | ![]() |
The cycle has not been defined in interval &1 - &2 | Space: object requires documentation | |
430 | ![]() |
System error: Error in reading INDX cycle & & | ||
431 | ![]() |
& terminated - see long text | ||
432 | ![]() |
Print out the list of errors | ||
433 | ![]() |
The unit field & is not unique | ||
434 | ![]() |
The segment contains no receivers | ||
435 | ![]() |
System error: during determination of posting date | ||
436 | ![]() |
System error: during currency translation | ||
437 | ![]() |
System error: during conversion of consumption unit | ||
438 | ![]() |
No update due to error | ||
439 | ![]() |
Iteration terminated with divergence | ||
440 | ![]() |
No line items exist. | ||
441 | ![]() |
Unit cannot be converted, quantities set to 0 | ||
442 | ![]() |
Unit cannot be standardized since target unit does not exist | ||
443 | ![]() |
Reset: document & has other from-period | ||
444 | ![]() |
Reset: document & has other to-period | ||
445 | ![]() |
Reset: Document & does not exist | ||
446 | ![]() |
Reset: document & has already been reversed | ||
447 | ![]() |
Reset: document & has already been partly reorganized | ||
448 | ![]() |
Reset: document & has different fiscal year | ||
449 | ![]() |
& ended without update | ||
450 | ![]() |
Cycle &1, start date &2, does not include any senders. | Space: object requires documentation | |
451 | ![]() |
No update was made. | ||
452 | ![]() |
Receiver allocation bases > 100% for sender & | ||
453 | ![]() |
System error: Table setting is incomplete | ||
454 | ![]() |
System error: discrepancy in internal table | ||
455 | ![]() |
Document number: interval not found | ||
456 | ![]() |
Further processing terminated due to divergence | ||
457 | ![]() |
No sender values defined | ||
458 | ![]() |
No receiver tracing factors defined | ||
459 | ![]() |
System error with sender rule fixed price or qtys calculated inversely | ||
460 | ![]() |
No unit of measure defined for sender | ||
461 | ![]() |
No unit of measure defined for receiver | ||
462 | ![]() |
More than one company code/company were used in the allocation | Space: object requires documentation | |
463 | ![]() |
Data record & already in file CSSL | ||
464 | ![]() |
Update executed with document numbers & to & . | ||
465 | ![]() |
Local updating could not be activated. | ||
466 | ![]() |
Termination of & in background processing. | ||
467 | ![]() |
Errror during callup of & in background processing. | ||
468 | ![]() |
No line items exist. | ||
469 | ![]() |
No posting of consumption quantities for &1 as quantity is incomplete | Space: object requires documentation | |
470 | ![]() |
Fixed sender values overwritten with total of fixed receiver values | Space: object requires documentation | |
471 | ![]() |
Sender & will not be credited 100%. | Space: object requires documentation | |
472 | ![]() |
*** General cross-segment messages **************** | Space: object requires documentation | |
473 | ![]() |
Function is no longer supported | Space: object requires documentation | |
474 | ![]() |
No sender values entered in segment &1. | Space: object requires documentation | |
475 | ![]() |
No valid master data for double-posted receiver &. | Space: object requires documentation | |
476 | ![]() |
Field overrun during sender value allocation (BCD_FIELD_OVERFLOW) | Space: object requires documentation | |
477 | ![]() |
Cumulation not possible; no stable allocation network exists for year. | Space: object requires documentation | |
478 | ![]() |
Total of receiver tracing factors equals zero; scaling carried out. | Space: object requires documentation | |
479 | ![]() |
Segment &1 is locked | Space: object requires documentation | |
480 | ![]() |
Scaling carried out for segment &. | Space: object requires documentation | |
481 | ![]() |
Document &/& already exists (line items not posted) | ||
482 | ![]() |
Document &/& is being processed (line items not posted) | ||
483 | ![]() |
Error during lock. Transfer of assessment costs to CO-PA terminated | ||
484 | ![]() |
Criteria could not be derived as no rules defined for structure & | ||
485 | ![]() |
No internal no. range defined for CO-PA act. line items of trans. type & | ||
486 | ![]() |
Do not define an int. no. range for CO-PA plan. LItems of trans. type & | ||
487 | ![]() |
Error during posting of CO-PA line items | ||
488 | ![]() |
System error: During derivation of currency types | ||
489 | ![]() |
Fixed costs are not transferred | ||
490 | ![]() |
Variable costs are not transferred | ||
491 | ![]() |
No summarization level exists for cycle & | Space: object requires documentation | |
492 | ![]() |
Reference data read from summarization level &1 | Space: object requires documentation | |
493 | ![]() |
Transfer of cost center costs is temporarily locked due to conversions. | ||
494 | ![]() |
Function not possible - administrative table is not converted. | ||
495 | ![]() |
Version & has not been planned. | ||
496 | ![]() |
Cycle & was not reversed. Line items not available | ||
497 | ![]() |
Reference basis "Variable portions" for special periods is not supported. | ||
498 | ![]() |
Maximum of 9999 receiver weighting factors possible. | Space: object requires documentation | |
499 | ![]() |
No cost-based Profitability Analysis active in controlling area &. | ||
500 | ![]() |
No accounting-based Profitability Analysis active in controlling area &. | ||
501 | ![]() |
*********Error Display ***************** ********************* | ||
502 | ![]() |
Position the cursor on a cycle entry | ||
503 | ![]() |
No further field groups exist | ||
504 | ![]() |
No further field groups exist | ||
505 | ![]() |
No further periods exist | ||
506 | ![]() |
The first period is already displayed | ||
507 | ![]() |
Position your cursor on a segment entry | ||
508 | ![]() |
*** general messages for cycle & & ********************** | ||
509 | ![]() |
*** General messages for segment & *********************** | ||
510 | ![]() |
Position the cursor on a sender entry | ||
511 | ![]() |
Processing terminated: error when reading change-documents | ||
512 | ![]() |
**** General messages ****************************************** | ||
513 | ![]() |
You do not have authorization to create cycle & | ||
514 | ![]() |
You do not have authorization to change cycle & | ||
515 | ![]() |
You do not have authorization to display cycle & | ||
516 | ![]() |
You do not have authorization to delete cycle & | ||
517 | ![]() |
You do not have authorization to execute cycle & | ||
518 | ![]() |
System error in the authorization check (RC & ) | ||
519 | ![]() |
No reversed cycles found | ||
520 | ![]() |
Maximum of 9999 receiver tracing factors allowed in segment &. | Space: object requires documentation | |
521 | ![]() |
No more than 9999 sender values allowed in segment &. | Space: object requires documentation | |
522 | ![]() |
------------------------------------------------------------------------- | ||
523 | ![]() |
Cycle run group & was created successfully. | Space: object requires documentation | |
524 | ![]() |
Cycle run group & still used in existing cycles. | Space: object requires documentation | |
525 | ![]() |
Cycle run group & was successfully deleted. | Space: object requires documentation | |
526 | ![]() |
Cycle run group & could not be deleted. | Space: object requires documentation | |
527 | ![]() |
Basic set & successfully created in client &. | Space: object requires documentation | |
528 | ![]() |
Error in client &, set &. | Space: object requires documentation | |
529 | ![]() |
RK811XUP: Generate business transaction set for allocations | Space: object requires documentation | |
530 | ![]() |
No. of decimal places rounded to is reduced for unit & from & to 3 | Space: object requires documentation | |
531 | ![]() |
Breakpoint set: &. | Space: object requires documentation | |
532 | ![]() |
Cycle updated in all current execution periods | Space: object requires documentation | |
533 | ![]() |
The cycle was posted in current individual periods. | Space: object requires documentation | |
534 | ![]() |
Additional document rows generated due to delta update | Space: object requires documentation | |
535 | ![]() |
No assignment of an assessment cost element to cost element &2 | Space: object requires documentation | |
536 | ![]() |
Cost Center Accounting and Activity-Based Costing not active in & | Space: object requires documentation | |
537 | ![]() |
Cost Center Accounting and Activity-Based Costing not active in & | Space: object requires documentation | |
538 | ![]() |
No assess. cost element assigned to cost element and recovery indicator | Space: object requires documentation | |
539 | ![]() |
No value fields assigned to cost element &2 | Space: object requires documentation | |
540 | ![]() |
Enter either an assessment cost element or "by cost element" | Space: object requires documentation | |
541 | ![]() |
Sender cost elements must contain assessment cost elements in cum. proc. | Space: object requires documentation | |
542 | ![]() |
Allocation structure & does not contain a valid assessment cost element | Space: object requires documentation | |
543 | ![]() |
Only sender rule 1 is allowed when you use an allocation structure | Space: object requires documentation | |
544 | ![]() |
The company code or company was used incorrectly in cycle & | Space: object requires documentation | |
545 | ![]() |
No valid company code used in cycle & | Space: object requires documentation | |
546 | ![]() |
No valid company used in cycle & | Space: object requires documentation | |
547 | ![]() |
Activity-dependent costs are not allocated during the distribution | Space: object requires documentation | |
548 | ![]() |
Error during update on table &V1& | Space: object requires documentation | |
549 | ![]() |
It is not possible to delete cycle run group &1 | Space: object requires documentation | |
550 | ![]() |
No valid document types found | Space: object requires documentation | |
551 | ![]() |
No valid document types found | Space: object requires documentation | |
552 | ![]() |
Field overflow when calculating the receiver tracing factor | Space: object requires documentation | |
553 | ![]() |
Only sender rule is allowed for a PA transfer structure | Space: object requires documentation | |
554 | ![]() |
You cannot post using cost element "space" | Space: object requires documentation | |
555 | ![]() |
No summarization level exists for cycle &1, segment &2 | Space: object requires documentation | |
556 | ![]() |
Reference data read from summarization level &1 | Space: object requires documentation | |
557 | ![]() |
Customizing error in table T811KL | Space: object requires documentation | |
558 | ![]() |
Allocation type and plan/actual indicator must not be changed | Space: object requires documentation | |
559 | ![]() |
Cycle &1, &2 already updated -> Return = Continue | Space: object requires documentation | |
560 | ![]() |
Segment of a cumulated cycle cannot be moved | Space: object requires documentation | |
561 | ![]() |
Cycle &1, start date &2 was created/changed | Space: object requires documentation | |
562 | ![]() |
Assessment has balance of balance sheet account (&1) as sender value | Space: object requires documentation | |
563 | ![]() |
No actual documents could be deleted in the general ledger | Space: object requires documentation | |
564 | ![]() |
Segment reversed -> cannot be moved | Space: object requires documentation | |
565 | ![]() |
Cycles are being modified | Space: object requires documentation | |
566 | ![]() |
Document & for cycle & was correctly posted | Space: object requires documentation | |
567 | ![]() |
*********End of Allocations GL********************************* | ||
568 | ![]() |
Choose the 'Receiver Tracing Factor' title element after changing object | Space: object requires documentation | |
569 | ![]() |
'Optimized cumulation' is only possible with activated 'cumulation' | The short text describes the object sufficiently |
History
Last changed on/by | ![]() |
20110908 | SAP |
SAP Release Created in |