SAP ABAP Message Class C7 (Scheduling)

Basic Data

Hierarchy

☛ BBPCRM (Software Component) BBPCRM
   ⤷ CRM (Application Component) Customer Relationship Management
     ⤷ CRM_APPLICATION (Package) All CRM Components Without Special Structure Packages
       ⤷ CX (Package) R/3 Application development: R/3 Scheduling

Attributes

Message class	C7
Short Description	Scheduling
Changed On	20100310
Last Changed At	115749

Messages

#	Message	Message Short Text	Documentation status	Authorization check
1	00	.		☐
2	000	**** Messages,which are written into the protocol		☐
3	001	Scheduling terminated: Check date and scheduling type		☐
4	002	Scheduling terminated: Check lot size unit of measure		☐
5	003	Scheduling terminated: Check lot size unit of measure		☐
6	004	No work center in the op./act. (working/operat.time via cal.in op./act.)		☐
7	005	All standard values not maintained in the operation		☐
8	006	No dates found for restrictions		☐
9	007	Date for restriction could not be converted		☐
10	008	Date is not defined in factory calendar		☐
11	009	PRT: Finish date is before start date, finish date = start date		☐
12	01	Group 'BW' missing in column structure &		☐
13	010	Sub-op.: Finish date is before start date, finish date = start date		☐
14	011	Order: Finish dat is before start date, finish date = start date		☐
15	012	Scheduling terminated: No time unit defined for day		☐
16	013	Time units are not fully defined		☐
17	014	No working/operating time maintained in work center for scheduling		☐
18	015	No capacity category maintained in work center for scheduling		☐
19	016	Calender not found		☐
20	017	No calendar specified		☐
21	018	Work center not found		☐
22	019	Entry not found in move time matrix		☐
23	02	Column structure missing for data entry form &		☐
24	020	Field overflow when calculating PRT quantities		☐
25	021	Field overflow when calculating PRT usage values		☐
26	022	Date cannot be converted into the internal format		☐
27	023	Error when converting into other quantity units		☐
28	024	Field overflow when calculating duration		☐
29	025	Scheduled start is after scheduled finish		☐
30	026	Scheduling type not defined, scheduling type = "only capacity reqmts"		☐
31	027	Quantity unit of the operation/activity is invalid		☐
32	028	No work center or calender in operation/activity		☐
33	029	No release period key defined for scheduling		☐
34	03	Accounting period missing		☐
35	030	Start date is in the past: today scheduling		☐
36	031	Control key & not found		☐
37	032	Scheduling terminated: Scheduling parameters are missing		☐
38	033	Constraint is before basic start date		☐
39	034	Constraint is after basic finish date		☐
40	035	Scheduled start is before basic start date		☐
41	036	Scheduled finish is after basic finish date		☐
42	037	Schedule conflict: Constraint is too early		☐
43	038	Schedule conflict: Constraint is too late		☐
44	039	Cannot keep within time constraint		☐
45	04	Fiscal year missing		☐
46	040	Schedule conflict: Contradicting time constraints		☐
47	041	No work center in the relationship (Operating time via calender from rel)		☐
48	042	Relationship: No operating time maintained in work center for scheduling		☐
49	043	Rel: No capacity category maintained in work center for scheduling		☐
50	044	Relationship: Calendar does not exist		☐
51	045	Relationship: No calendar specified		☐
52	046	Rel: Work center does not exist		☐
53	047	Rel: Field overflow when calculating the time interval		☐
54	048	Rel: Date is not defined in factory calendar		☐
55	049	Rel: Date cannot be converted into the internal format		☐
56	05	Company & not maintained in company master record		☐
57	050	Rel: Error when converting into different quantity unit		☐
58	051	Operating time not maintained for move in the move time matrix		☐
59	052	Milestone &2: Date is not within the dates for activity &1	Space: object requires documentation	☐
60	053	Field overflow when calculating quantity		☐
61	054	WBS date could not be converted	Space: object requires documentation	☐
62	055	Division by 0 when calculating operation quantity		☐
63	056	Capacity & not available		☐
64	057	No valid capacity for finite scheduling		☐
65	058	Relationships to other standard networks exist		☐
66	059	Detailed scheduling level - Order &		☐
67	06	Too few spaces: transaction type texts may be overwritten		☐
68	060	Rate-based scheduling level - Order &		☐
69	061	Rough-cut scheduling level - Order &		☐
70	062	=========================================================================		☐
71	063	Overlapping could not be maintained		☐
72	064	Minimum overlap time could not be maintained		☐
73	065	Order & is completely confirmed. Order basic dates unchanged		☐
74	066	Error during scheduling of splits		☐
75	067	Not all standard values maintained		☐
76	068	Can delivery date for material & be kept? Realistic date: &		☐
77	069	PRT: no master record found		☐
78	07	Too few spaces for transaction type (minimum no. of spaces = 3)		☐
79	070	Relationship: Maximum duration could not be kept	Space: object requires documentation	☐
80	071	Operation has been scheduled	Space: object requires documentation	☐
81	072	After scheduling: Order starts in the past	Space: object requires documentation	☐
82	073	Milestone &2: Date is not within the dates for WBS element &1	Space: object requires documentation	☐
83	074	Dates are set by external system	Space: object requires documentation	☐
84	075	Overall network scheduling: Basic finish date before scheduled finish	Space: object requires documentation	☐
85	076	Overall network scheduling: Basic start is after scheduled start	Space: object requires documentation	☐
86	077	Overall netw. sched.: No conflicts between basic and scheduled dates	Space: object requires documentation	☐
87	078	WBS element &: Forwards scheduling is not possible without a start date	Space: object requires documentation	☐
88	079	WBS element &: Backwards scheduling is not possible without a finish date	Space: object requires documentation	☐
89	08	Too few spaces: company names may be overwritten		☐
90	080	Program CX_TCX00 executed successfully	Space: object requires documentation	☐
91	081	Program CX_TCX00 executed with a warning	Space: object requires documentation	☐
92	082	Time units exist that are smaller and larger/equal to the day	Space: object requires documentation	☐
93	083	WBS element &1: Scheduled start comes before the basic start date	Space: object requires documentation	☐
94	084	WBS element &1: Scheduled finish comes after the basic finish date	Space: object requires documentation	☐
95	085	Repetitive maufacturing: Midpoint sched. around work center &1 not poss.	Space: object requires documentation	☐
96	086	In-house production time determined is greater than 999 days	Space: object requires documentation	☐
97	09	Too few spaces: currencies may be overwritten		☐
98	090	Scheduling: Multiple commitment due to constraint dates	Space: object requires documentation	☐
99	10	Too few spaces between LW and VW		☐
100	100	**** Messages which are not written into the log		☐
101	101	Forward scheduling (enter start date)		☐
102	102	Backward scheduling (enter finish date)		☐
103	103	Capacity requirements calc. (enter start and finish date)		☐
104	104	Start date must not be later than finish date		☐
105	105	Start date is in the past		☐
106	106	Finish date is in the past		☐
107	107	Enter a valid scheduling type		☐
108	108	Lot size is not within selected lot size range		☐
109	109	Basic finish date is after requirements date &		☐
110	11	Item no. and item text missing		☐
111	110	Outline finish date is after requirements date &		☐
112	111	Check if rate-based scheduling is appropriate -> see long text		☐
113	112	Dependency is too complicated; routing & , sequence & , operation &	The short text describes the object sufficiently	☐
114	118	Scheduling has not yet been carried out		☐
115	119	Scheduling log does not contain any entries		☐
116	12	Form has & balance - correct to 0 balance		☐
117	120	Outline finish date could not be kept	Space: object requires documentation	☐
118	121	Outline start date could not be kept	Space: object requires documentation	☐
119	13	Column structure & is not complete for language &		☐
120	130	********* Texts for X messsages *****************************************	Space: object requires documentation	☐
121	131	Status object &1 in operation &2 order &3 is invalid	Space: object requires documentation	☐
122	132	Error while creating internal table operation for order number &	Space: object requires documentation	☐
123	133	Scheduling termination: Invalid scheduling time	Space: object requires documentation	☐
124	134	Error while creating internal table Order for order number &1	Space: object requires documentation	☐
125	135	Error while reading internal table Operation	Space: object requires documentation	☐
126	136	Error whiel reading internal table Order	Space: object requires documentation	☐
127	137	Selection criteria not allowed for capacities	Space: object requires documentation	☐
128	138	Incorrect access to the capacity document table during availability check	Space: object requires documentation	☐
129	139	Key field for operation in capacity requirements record KBED incorrect	Space: object requires documentation	☐
130	140	Error during scheduling of splits		☐
131	141	Error while reading capacities with version numbers	Space: object requires documentation	☐
132	142	error while reading capacities with splits	Space: object requires documentation	☐
133	144	WBS element/project scheduling: No date has been entered	Space: object requires documentation	☐
134	145	Dates do not exist in the forecast dates	Space: object requires documentation	☐
135	146	There is no operation for scheduling	Space: object requires documentation	☐
136	15	You are not authorized to access company &		☐
137	27	Bal.sheet/inc.stmt. version & not defined		☐
138	28	Data transfer for company & not 'P'		☐
139	29	According to company master record, roll-up not allowed for &		☐
140	30	Company & not maintained		☐
141	31	Transaction not allowed according to company (trans = &)		☐
142	32	Company & not maintained		☐
143	33	No currency specified for this company		☐
144	34	Input type is not P, K or V		☐
145	35	Ledger & not maintained		☐
146	36	Reporting currency not assigned to this ledger		☐
147	37	Company not assigned to ledger entered		☐
148	38	Period must be 000		☐
149	39	Period 000 not allowed		☐
150	40	Data input not yet opened		☐
151	41	Data input not yet opened		☐
152	42	Data input blocked according to consolidation status table		☐
153	43	Invalid period		☐
154	44	Indicator &, line &, logically inconsistent		☐
155	45	Set not specified in line &		☐
156	46	Year not specified in line &		☐
157	47	Year is too high in line &		☐
158	48	Partner set prefix missing in master data of company &		☐
159	49	Trading partner missing for item & (T857 line &)		☐
160	50	Indicator &, line &, unknown		☐
161	51	Data entry form & does not exist		☐
162	52	& & totals difference		☐
163	53	Item no. missing		☐
164	54	No entry possible for item no. &		☐
165	55	Item no. & changed by &		☐
166	56	Item no. & does not exist		☐
167	57	Enter accumulated values for transaction types		☐
168	58	No entry possible for transaction type &		☐
169	59	Transaction type & is not defined		☐
170	60	Trading partner & not maintained		☐
171	61	Totals are correct		☐
172	62	Invalid function code		☐
173	63	You are making an entry in a previous accounting period		☐
174	64	You can not insert any lines for this item		☐
175	65	Fin. statement item & not defined		☐
176	66	Currency table or entry does not exist		☐
177	67	Currency field too small		☐
178	68	Note: If you press the Delete key again, the values will be deleted		☐
179	69	Error during update of totals records data base		☐
180	70	Error during insert in totals records data file		☐
181	71	Trading partner & is identical to company		☐
182	72	& not in currency table		☐
183	73	Data entered		☐
184	74	Difference of & & on page &		☐
185	75	Company data being entered by someone else		☐
186	76	Parameter PC/IMPORT missing		☐
187	77	Parameter (PC/IMPORT) incorrect		☐
188	78	No data exists		☐
189	79	Difference of & & -> correct error		☐
190	80	& & of item not balanced		☐
191	81	Title text not maintained		☐
192	82	Amount missing		☐
193	83	Version & not maintained		☐
194	84	All values deleted		☐
195	85	No quantities can be entered according to the ledger table		☐
196	86	No quantities can be entered when using breakdown by currencies		☐
197	87	Difference of & & transferred to statistical CoID &		☐
198	88	Item no. is blank in line &		☐
199	89	A program error occurred (no item specified)		☐
200	90	No company ID has been specified -> termination		☐
201	91	Remove last line of data entry form		☐
202	92	Error during delete in totals records file		☐
203	93	& & breakdown not possible with entry by accouting period		☐
204	94	Data entry on totals items is not allowed >>		☐
205	95	Data input for corporate values already blocked		☐
206	96	Data input for local values already blocked		☐
207	98	Input for data entry form & blocked		☐
208	99	You have no authorization for data entry form &		☐

History

Last changed on/by	20100310	SAP
SAP Release Created in