Hierarchy

⤷

⤷

Basic Data
Data Element | VCMINFWDTH |
Short Description | Minimum field width in 1/100mm |
Data Type
Category of Dictionary Type | D | Domain |
Type of Object Referenced | No Information | |
Domain / Name of Reference Type | VCMINFWDTH | |
Data Type | NUMC | Character string with only digits |
Length | 5 | |
Decimal Places | 0 | |
Output Length | 5 | |
Value Table |
Further Characteristics
Search Help: Name | ||
Search Help: Parameters | ||
Parameter ID | ||
Default Component name | ||
Change document | ||
No Input History | ||
Basic direction is set to LTR | ||
No BIDI Filtering |
Field Label
Length | Field Label | |
Short | 10 | Min width |
Medium | 15 | Min.field width |
Long | 20 | Minimum field width |
Heading | 5 | Min.W |
Documentation
Definition
Minimum field width in 1/100 mm.
Dependencies
If the field is a filler field, you may not enter a minimum field width.
Supplementary Documentation - VCMINFWDTH0001
Use
Procedure
Examples
A graphic object consists of three fields with the following minimum field widths:
Field a: 500
Field b: 300
Field c: 300
+=========================+
! field a !
+============+============+
! field b ! field c !
+============+============+
The width of the graphic object is 600. Field a is widened appropriately from 500 to 600.
Dependencies
This value, and never less, normally determines the width of the field.
However, if several fields are layered on top of each other, the width of a field is determined by the field with the largest minimum width. The width of the graphic object is determined by the layout of the fields and their minimum width (see the example).
History
Last changed by/on | SAP | 19990505 |
SAP Release Created in |