SAP ABAP Data Element EHS00_AERT3 (Short-Time Exposure Rating)
Hierarchy
☛ EA-APPL (Software Component) SAP Enterprise Extension PLM, SCM, Financials
   ⤷ EHS-HEA (Application Component) Occupational Health
     ⤷ P99Q1 (Package) EH&S: Occupational Health
Basic Data
Data Element EHS00_AERT3
Short Description Short-Time Exposure Rating  
Data Type
Category of Dictionary Type D   Domain
Type of Object Referenced     No Information
Domain / Name of Reference Type EHS00_AERAT    
Data Type CHAR   Character String 
Length 1    
Decimal Places 0    
Output Length 1    
Value Table T7EHS00RA    
Further Characteristics
Search Help: Name    
Search Help: Parameters    
Parameter ID   
Default Component name    
Change document    
No Input History    
Basic direction is set to LTR    
No BIDI Filtering    
Field Label
  Length  Field Label  
Short 10 Exp.rating 
Medium 20 Short exp. rating <= 
Long 25 Short-time exp. rating <= 
Heading 28 Short-time exposure rating 
Documentation

Definition

Specifies the rating for the short-time exposure limit that triggers the proposal of a health surveillance protocol for the person affected.

Trigger criteria

  1. If the short-time exposure limit is higher than the trigger level, the system will always propose a protocol. If the short-term exposure limit is the same as the trigger level, the system checks the second criterion for proposing a protocol: whether the trigger level for exposure frequency has been exceeded.
    • If this is the case, the protocol is proposed.
    • If this is not the case, the protocol is not proposed.
  2. If the exposure frequency is the same as the trigger level, the system checks the third criterion for proposing a protocol: whether the additional trigger level for the long-term average has been exceeded.
    • If this is the case, the protocol is proposed.
    • If this is not the case, the protocol is not proposed.

In other words, the system only proposes a health surveillance protocol if all the above requirements are met - provided that all the relevant entries have been made. If there is no entry for one of the three trigger levels, it is not included in the check.

The system also triggers a protocol for any rating that is higher than the one specified here.

Examples

The system only proposes a protocol if the exposure measured is between 10% and 50% of the maximum full-shift reference value. The trigger level for task exposure is therefore C. The protocol is also triggered if higher ratings such as A or B are actually measured.

History
Last changed by/on SAP  20020125 
SAP Release Created in