Hierarchy

⤷

⤷

Properties
Class | CL_ISU_EDM_SETTLPROCESS | |
Short Description | Settlement Process (Including Parameter Determination) | |
Super Class | ||
Instantiability of a Class | 2 | Public |
Final |
General Data
Message Class | ||
Program status | ||
Category | 0 | |
Package | EE_EDM_SET | EDM Settlement |
Created | 20010212 | SAP |
Last change | 20050224 | SAP |
Shared Memory-enabled | ||
Fixed point arithmetic | ||
Unicode checks active |
Forward declarations
# | Type group / Object type | Type | Type Description |
---|---|---|---|
1 | ![]() |
Type group use (TYPE-POOLS tp) | Type group use (TYPE-POOLS tp) |
Interfaces
Class CL_ISU_EDM_SETTLPROCESS has no interface implemented.
Friends
Class CL_ISU_EDM_SETTLPROCESS has no friend class.
Attributes
# | Attribute | Level | Visibility | Read only | Typing | Associated Type | Initial Value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
Constant | Public | Type reference (TYPE) | IDE_COND_TYPE | '02' | Condition Type for Communication of Aggregated Data | 20010305 | |
2 | ![]() |
Constant | Public | Type reference (TYPE) | E_CONTEXTCATEGORY | '02' | Context Category for Profile Allocation Role | 20010219 | |
3 | ![]() |
Constant | Public | Type reference (TYPE) | E_CONTEXTCATEGORY | '00' | Context Category for Profile Allocation Role | 20010219 | |
4 | ![]() |
Constant | Public | Type reference (TYPE) | E_CONTEXTCATEGORY | '07' | Context Category for Profile Allocation Role | 20040726 | |
5 | ![]() |
Constant | Public | Type reference (TYPE) | E_CONTEXTCATEGORY | '03' | Context Category for Profile Allocation Role | 20010219 | |
6 | ![]() |
Constant | Public | Type reference (TYPE) | E_CONTEXTCATEGORY | '01' | Context Category for Profile Allocation Role | 20010219 | |
7 | ![]() |
Constant | Public | Type reference (TYPE) | E_EDMSETTLPARTYPE | '1' | Parameter Type in Settlement Procedure (Inp/Out) | 20010212 | |
8 | ![]() |
Constant | Public | Type reference (TYPE) | E_EDMSETTLPARTYPE | '2' | Parameter Type in Settlement Procedure (Inp/Out) | 20010212 | |
9 | ![]() |
Constant | Public | Type reference (TYPE) | E_EDMSETTLPARTYPE | '3' | Parameter Type in Settlement Procedure (Inp/Out) | 20010212 | |
10 | ![]() |
Constant | Public | Type reference (TYPE) | E_EDMSETTLPARUSAGE | 'G' | General Parameters for all Procedures | 20010212 | |
11 | ![]() |
Constant | Public | Type reference (TYPE) | E_EDMSETTLPARUSAGE | '3' | Specific Parameters per Supply Grid | 20010212 | |
12 | ![]() |
Constant | Public | Type reference (TYPE) | E_EDMSETTLPARUSAGE | '1' | Specific to Settlement Procedure | 20010212 | |
13 | ![]() |
Constant | Public | Type reference (TYPE) | E_EDMSETTLPARUSAGE | '2' | Specific Parameters per Settlement Unit | 20010212 | |
14 | ![]() |
Constant | Public | Type reference (TYPE) | KENNZX | 'X' | Indicators | 20010212 | |
15 | ![]() |
Constant | Public | Type reference (TYPE) | E_SETTLPROCESSINT | '03' | Daily Settlement Periods | 20010302 | |
16 | ![]() |
Constant | Public | Type reference (TYPE) | E_SETTLPROCESSINT | '01' | Monthly Settlement Periods | 20010302 | |
17 | ![]() |
Constant | Public | Type reference (TYPE) | E_SETTLPROCESSINT | '00' | Other Settlement Periods | 20010302 | |
18 | ![]() |
Constant | Public | Type reference (TYPE) | E_SETTLPROCESSINT | '02' | Yearly Settlement Periods | 20010302 | |
19 | ![]() |
Constant | Public | Type reference (TYPE) | SWC_ELEM | 'PROFILES' | Profil Parameters in Workflow Container | 20010307 | |
20 | ![]() |
Constant | Public | Type reference (TYPE) | SWC_ELEM | 'SETTLDOC' | Input Parameters in Workflow Container | 20010307 | |
21 | ![]() |
Constant | Public | Type reference (TYPE) | SWC_ELEM | 'SETTLRUN' | Input Parameters in Workflow Container | 20010307 | |
22 | ![]() |
Constant | Public | Type reference (TYPE) | SWC_ELEM | 'VALUES' | Value Parameters in Workflow Container | 20010307 | |
23 | ![]() |
Instance attribute | Private | Type reference (TYPE) | EEDMSETTLPROC | Settlement Procedure (Header Data) | 20010212 | ||
24 | ![]() |
Static Attribute | Private | Type reference (TYPE) | IEPROFTYPE | Table Type for Customizing Table EPROFTYPE | 20010921 | ||
25 | ![]() |
Instance attribute | Private | Type reference (TYPE) | INT_UI | Internal Key of Point of Delivery for Procedure | 20010212 | ||
26 | ![]() |
Instance attribute | Public | Type reference (TYPE) | T_EEDMSETTLPROCESSPAR | Settlement Procedure (Procedure Parameters) | 20010212 | ||
27 | ![]() |
Instance attribute | Private | Type reference (TYPE) | T_EEDMSETTLPROCPAG | Settlement Procedure (Profiles as Global Parameters) | 20010212 | ||
28 | ![]() |
Instance attribute | Private | Type reference (TYPE) | T_EEDMSETTLPROCRS | Roles of Profiles for Sending | 20010227 | ||
29 | ![]() |
Instance attribute | Public | Type reference (TYPE) | EEDMSETTLDOCRUNINFO | Information for a Settlement Run | 20010307 | ||
30 | ![]() |
Instance attribute | Private | Type reference (TYPE) | E_EDMSETTLDOC | Settlement Document for Current Run | 20010222 | ||
31 | ![]() |
Instance attribute | Private | Type reference (TYPE) | E_SETTLDOCSELECT | Variant for Settlement Document | 20010222 | ||
32 | ![]() |
Instance attribute | Public | Type reference (TYPE) | E_EDMSETTLPROCESS | Settlement Procedure | 20010212 | ||
33 | ![]() |
Instance attribute | Public | Type reference (TYPE) | E_EDMSETTLPROCESSTXT | Description of Settlement Procedure | 20010212 | ||
34 | ![]() |
Instance attribute | Private | Type reference (TYPE) | TPT_TEMPLATE_PROFILE | Table with Template Profiles | 20010222 |
Methods
# | Method | Level | Visibility | Method type | Description | Created on |
---|---|---|---|---|---|---|
1 | ![]() |
Static method | Public | Method | Consistency Check for Parameter Determination for Variant | 20010212 |
2 | ![]() |
Static method | Public | Method | Consistency Check for Parameter Determination for Variant | 20010326 |
3 | ![]() |
Static method | Public | Method | Check Whether Target Prof.and Prof. Template are Compatible | 20010419 |
4 | ![]() |
Static method | Public | Method | Consistency Check for Customizing of Settlement Procedure | 20010919 |
5 | ![]() |
Instance method | Private | Method | Check Whether Grids Are Selected Or Used Correctly | 20010410 |
6 | ![]() |
Instance method | Private | Method | Check Whether all Profiles Were Found | 20010322 |
7 | ![]() |
Static method | Public | Method | Consistency Check for Results | 20010404 |
8 | ![]() |
Static method | Private | Method | Check Profile Type | 20010921 |
9 | ![]() |
Static method | Private | Method | Check Selection Categories of Settlement Procedure | 20010405 |
10 | ![]() |
Static method | Public | Method | Check Time Intervals of Settlement Process | 20010302 |
11 | ![]() |
Static method | Public | Method | Check Whether Selection Reference Document Is Compatible | 20010405 |
12 | ![]() |
Instance method | Public | Constructor | CONSTRUCTOR | 20010212 |
13 | ![]() |
Static method | Public | Method | Converts Time Stamp into Local Time Zone | 20010220 |
14 | ![]() |
Instance method | Private | Method | Create and Allocate Device Info Record | 20010917 |
15 | ![]() |
Instance method | Private | Method | Create and Allocate EDM Profile | 20010917 |
16 | ![]() |
Instance method | Public | Method | Create and Allocate Profile Parameters | 20010913 |
17 | ![]() |
Instance method | Public | Method | Generate Instance of Settlement Run | 20010307 |
18 | ![]() |
Instance method | Private | Method | Determine Allocated Profiles (Corresponding Role) | 20010219 |
19 | ![]() |
Static method | Public | Method | Grid Including All Top Grids | 20010426 |
20 | ![]() |
Static method | Private | Method | Supply External Point of Delivery ID | 20010918 |
21 | ![]() |
Instance method | Public | Method | Parameter Determination of Profiles to Be Sent | 20010227 |
22 | ![]() |
Instance method | Public | Method | Parameter Determination for Profiles | 20010212 |
23 | ![]() |
Instance method | Public | Method | Parameter Definition for a Settlement Parameter | 20010906 |
24 | ![]() |
Instance method | Public | Method | Parameter Determination for Single Profile | 20010212 |
25 | ![]() |
Static method | Private | Method | Read Long text for Profile Role | 20010221 |
26 | ![]() |
Static method | Private | Method | Read Reference Profile for Specified Profile | 20010221 |
27 | ![]() |
Instance method | Private | Method | Determine Registers for Point of Delivery | 20010913 |
28 | ![]() |
Static method | Public | Method | Data for Selection Control | 20010820 |
29 | ![]() |
Static method | Public | Method | Long Text for Service Provider | 20010227 |
30 | ![]() |
Static method | Public | Method | Read Text for Settlement Parameters | 20010301 |
31 | ![]() |
Instance method | Public | Method | Template Profile (Header Data) for Settlement Parameters | 20010222 |
32 | ![]() |
Instance method | Public | Method | Parameter Determination for Values | 20010212 |
33 | ![]() |
Instance method | Public | Method | co_selected if Parameter is an Input Parameter | 20010212 |
34 | ![]() |
Instance method | Public | Method | co_selected if Parameter is a Demanded Result | 20010313 |
35 | ![]() |
Instance method | Public | Method | co_selected if Parameter is a Procedure Parameter | 20010212 |
36 | ![]() |
Static method | Public | Method | Point of Delivery of Supply Grid | 20010212 |
37 | ![]() |
Static method | Public | Method | Read Point of Delivery for Service Provider | 20010227 |
38 | ![]() |
Instance method | Private | Method | Point of Delivers of Settlement Procedure | 20010212 |
39 | ![]() |
Static method | Private | Method | Point of Delivery of Settlement Uni | 20010212 |
40 | ![]() |
Instance method | Private | Method | Read Customizing of Settlement Parameters | 20010212 |
41 | ![]() |
Static method | Private | Method | Select All Grids | 20010404 |
42 | ![]() |
Static method | Private | Method | Read Settlement Process and SettlementDocSelect. Combination | 20010404 |
43 | ![]() |
Static method | Private | Method | Selection Method for EEDMSETTLPROCRI | 20010212 |
44 | ![]() |
Static method | Private | Method | Selection Method for EEDMSETTLPROCRR | 20010212 |
45 | ![]() |
Static method | Private | Method | Selection Method for EEDMSETTLPROCRS | 20010227 |
46 | ![]() |
Static method | Private | Method | Selection Method for EEDMSETTLPROCSER | 20010820 |
47 | ![]() |
Static method | Private | Method | Read Parameter Definition for Settlement Procedure | 20010212 |
48 | ![]() |
Static method | Public | Method | Roles of Profle Allocation for Settlement Procedure | 20010212 |
49 | ![]() |
Static method | Public | Method | Send Profiles to Service Provider | 20010305 |
50 | ![]() |
Instance method | Public | Method | Start Settlement Step | 20010307 |
51 | ![]() |
Static method | Public | Method | Start Settlement Step in Test Modus | 20010612 |
52 | ![]() |
Instance method | Public | Method | Interval Lengths of Result Profiles | 20010215 |
53 | ![]() |
Instance method | Public | Method | Reason for Generating a Profile Version | 20010215 |
54 | ![]() |
Static method | Public | Method | Wizard: Check and Create Settlement Parameters | 20010919 |
Events
Class CL_ISU_EDM_SETTLPROCESS has no event.
Types
# | Type | Visibility | Typing | Associated Type | Description | Created on | Type Source |
---|---|---|---|---|---|---|---|
1 | TPT_TEMPLATE_PROFILE | Private | See coding | Table with Template Profiles | 20010222 |
|
|
2 | TP_TEMPLATE_PROFILE | Private | See coding | TP_TEMPLATE_PROFILE | 20010222 |
|
Method Signatures
Method CHECK_ALL_PARAMETERS Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
XT_GRID_ID | Call by reference | Type reference (TYPE) | T_GRID | Netz in der Versorgungswirtschaft | 20010212 | ||
2 | ![]() |
XT_REFPROFILE | Call by reference | Type reference (TYPE) | T_EEDMSETTLCUSTGRP | Refprofile auswerten (z.B. Kundengruppe) | 20010320 | ||
3 | ![]() |
XT_SETTLUNIT | Call by reference | Type reference (TYPE) | T_SETTLUNIT | Liste von Bilanzierungseinheiten | 20010910 | ||
4 | ![]() |
XY_OBJ | Call by reference | Object reference (TYPE REF TO) | CL_ISU_EDM_SETTLPROCESS | Bilanzierungsprozess (u.a. Parameterfindung) | 20010323 | ||
5 | ![]() |
X_DATEFROM | Call by reference | Type reference (TYPE) | EEDMDATEFROM | Struktur für Ab-Datum | 20010910 | ||
6 | ![]() |
X_SETTLDOC | Call by reference | Type reference (TYPE) | E_EDMSETTLDOC | Bilanzierungsbeleg (Nummer) | 20010320 | ||
7 | ![]() |
YT_ERROR | Call by reference | Type reference (TYPE) | T_EEDMSETTLMSG | allgemeine Fehlermeldungen | 20010320 | ||
8 | ![]() |
YT_MISSING_PROFILE | Call by reference | Type reference (TYPE) | T_SETTLPROCESSPAR_PROFILE | Tabelle mit Profilparametern des Bilanzierungsverfahrens | 20010212 | ||
9 | ![]() |
YT_MISSING_VALUE | Call by reference | Type reference (TYPE) | T_SETTLPROCESSPAR_VALUE | Tabelle mit Werteparametern des Bilanzierungsverfahrens | 20010212 | ||
10 | ![]() |
YT_PROFILE | Call by reference | Type reference (TYPE) | T_SETTLPROCESSPAR_PROFILE | Tabelle mit Profilparametern des Bilanzierungsverfahrens | 20010212 | ||
11 | ![]() |
YT_SETTLUNIT | Call by reference | Type reference (TYPE) | T_SETTLUNIT | Liste von Bilanzierungseinheiten | 20010322 | ||
12 | ![]() |
YT_TEMPLATE | Call by reference | Type reference (TYPE) | T_EEDMSETTLPARAMP | Tabelle mit Musterprofilen | 20010323 | ||
13 | ![]() |
YT_VALUE | Call by reference | Type reference (TYPE) | T_SETTLPROCESSPAR_VALUE | Tabelle mit Werteparametern des Bilanzierungsverfahrens | 20010212 | ||
14 | ![]() |
Y_CRITICAL_ERROR_FOUND | Call by reference | Type reference (TYPE) | KENNZX | Kritische Inkonsistenz gefunden | 20010410 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Fehler bei der Verarbeitung | 20010320 |
Method CHECK_ALL_PROFROLES Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
XY_OBJ | Call by reference | Object reference (TYPE REF TO) | CL_ISU_EDM_SETTLPROCESS | Bilanzierungsprozess (u.a. Parameterfindung) | 20010326 | ||
2 | ![]() |
X_SETTLDOC | Call by reference | Type reference (TYPE) | E_EDMSETTLDOC | Bilanzierungsbeleg (Nummer) | 20010326 | ||
3 | ![]() |
YT_ERROR | Call by reference | Type reference (TYPE) | T_EEDMSETTLMSG | allgemeine Fehlermeldungen | 20010326 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Fehler bei der Verarbeitung | 20010326 |
Method CHECK_COMPATIBILITY Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_PARNAME | Call by reference | Type reference (TYPE) | E_EDMSETTLPARNAME | Name des Parameters für Bilanzierungsschritte | 20010419 | ||
2 | ![]() |
X_TARGET_PROFILE | Call by reference | Type reference (TYPE) | E_PROFILE | Nummer des Zielprofils | 20010419 | ||
3 | ![]() |
X_TEMPLATE_PROFILE | Call by reference | Type reference (TYPE) | E_PROFILE | Nummer des Musterprofils | 20010419 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Profile sind nicht kompatibel | 20010419 |
Method CHECK_CUSTOMIZING Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_CHECK_PARAMETER | Call by reference | Type reference (TYPE) | KENNZX | CO_SELECTED | Parametercustomizing prüfen | 20010919 | |
2 | ![]() |
X_SETTLPROCESS | Call by reference | Type reference (TYPE) | E_EDMSETTLPROCESS | Bilanzierungsverfahren | 20010919 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Fehler bei der Verarbeitung | 20010919 | |
2 | ![]() |
nicht konsistente Customizingdaten | 20010919 | |
3 | ![]() |
nicht verwendet | 20010919 |
Method CHECK_GRID_USAGE Signature
Method CHECK_GRID_USAGE on class CL_ISU_EDM_SETTLPROCESS has no parameter.
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Netze werden nicht berücksichtigt | 20010410 |
Method CHECK_MISSING_PROFILES Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
XT_GRID_ID | Call by reference | Type reference (TYPE) | T_GRID | Tablle zu GRID_ID | 20010322 | ||
2 | ![]() |
XT_PROFILE | Call by reference | Type reference (TYPE) | T_SETTLPROCESSPAR_PROFILE | Tabelle mit Profilparametern des Bilanzierungsverfahrens | 20010322 | ||
3 | ![]() |
XT_REFPROFILE | Call by reference | Type reference (TYPE) | T_EEDMSETTLCUSTGRP | Tabellentyp für Kundengruppen | 20010322 | ||
4 | ![]() |
XT_SETTLUNIT | Call by reference | Type reference (TYPE) | T_SETTLUNIT | Liste von Bilanzierungseinheiten | 20010322 | ||
5 | ![]() |
X_CONTEXTCATEGORY | Call by reference | Type reference (TYPE) | E_EDMSETTLCONTEXTCATEGORY | Parametercontext im Bilanzierungsverfahren | 20010322 | ||
6 | ![]() |
X_PARAMETER | Call by reference | Type reference (TYPE) | EEDMSETTLPROCESSPAR | Parameter im Bilanzierungsverfahren | 20010328 | ||
7 | ![]() |
YT_MISSING_PROFILE | Call by reference | Type reference (TYPE) | T_SETTLPROCESSPAR_PROFILE | Tabelle mit Profilparametern des Bilanzierungsverfahrens | 20010322 |
Method CHECK_MISSING_PROFILES on class CL_ISU_EDM_SETTLPROCESS has no exception.
Method CHECK_OVERLAPPING_RESULTS Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_FROM | Call by reference | Type reference (TYPE) | EEDMDATEFROM | Struktur für Ab-Datum | 20010404 | ||
2 | ![]() |
X_TIMEZONE | Call by reference | Type reference (TYPE) | TIMEZONE | Zeitzone | 20010404 | ||
3 | ![]() |
X_TO | Call by reference | Type reference (TYPE) | EEDMDATETO | Struktur für Bis-Datum | 20010404 | ||
4 | ![]() |
YT_ERROR | Call by reference | Type reference (TYPE) | T_EEDMSETTLMSG | allgemeine Fehlermeldungen | 20010404 | ||
5 | ![]() |
YT_OVERLAPPING_PROFILE | Call by reference | Type reference (TYPE) | E_PROFILE_T | Tabellentyp für Profilnummern | 20010404 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Fehler bei der Verarbeitung | 20010404 |
Method CHECK_PROFILE_TYPE Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_CHECK_TEMPLATE | Call by reference | Type reference (TYPE) | KENNZX | Prüfung des Musterprofils | 20010921 | ||
2 | ![]() |
X_PROFILE | Call by reference | Type reference (TYPE) | E_PROFILE | Nummer des EDM-Profils | 20010921 | ||
3 | ![]() |
X_PROFTYPE | Call by reference | Type reference (TYPE) | PROFTYPE | Profilart | 20010921 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Fehler bei der Verarbeitung | 20010921 | |
2 | ![]() |
Profilart nicht zulässig | 20010921 |
Method CHECK_SELECTION Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_NEW_SETTLPROCESS | Call by reference | Type reference (TYPE) | E_EDMSETTLPROCESS | Bilanzierungsverfahren | 20010405 | ||
2 | ![]() |
X_SETTLPROCESS | Call by reference | Type reference (TYPE) | E_EDMSETTLPROCESS | Bilanzierungsverfahren | 20010405 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Fehler bei der Verarbeitung | 20010409 | |
2 | ![]() |
Selektion ist nicht kompatibel | 20010405 |
Method CHECK_SETTLPROCESSINT Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_FROM | Call by reference | Type reference (TYPE) | EEDMDATEFROM | Struktur für Ab-Datum | 20010302 | ||
2 | ![]() |
X_SETTLPROCESS | Call by reference | Type reference (TYPE) | E_EDMSETTLPROCESS | Bilanzierungsverfahren | 20010302 | ||
3 | ![]() |
X_TO | Call by reference | Type reference (TYPE) | EEDMDATETO | Struktur für Bis-Datum | 20010302 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Zeitintervall nicht gültig | 20010302 | |
2 | ![]() |
Bilanzierungsprozess nicht gefunden | 20010302 |
Method CHECK_SETTLSELDOC Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
XT_SETTLUNIT | Call by reference | Type reference (TYPE) | T_SETTLUNIT | Liste von Bilanzierungseinheiten | 20010405 | ||
2 | ![]() |
X_NEW_SETTLDOC | Call by reference | Type reference (TYPE) | EEDMSETTLDOC | Bilanzierungsbeleg (Kopf) | 20010405 | ||
3 | ![]() |
X_SETTLSELDOC | Call by reference | Type reference (TYPE) | E_EDMSETTLSELDOC | Bilanzierungsbeleg zur Selektion der Zählpunktdaten | 20010405 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Fehler bei der Verarbeitung | 20010405 | |
2 | ![]() |
Selektionsbeleg kann nicht verwendet werden | 20010405 |
Method CONSTRUCTOR Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_SETTLDOC | Call by reference | Type reference (TYPE) | E_EDMSETTLDOC | Bilanzierungsbeleg des aktuellen Laufs | 20010222 | ||
2 | ![]() |
X_SETTLDOCSELECT | Call by reference | Type reference (TYPE) | E_SETTLDOCSELECT | Variante zum Bilanzierungsbeleges | 20010222 | ||
3 | ![]() |
X_SETTLPROCESS | Call by reference | Type reference (TYPE) | E_EDMSETTLPROCESS | Bilanzierungsverfahren | 20010212 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Fehler bei der Instanzerzeugung | 20010212 | |
2 | ![]() |
Bilanzierungsverfahren nicht bekannt | 20010212 | |
3 | ![]() |
fehlende Parameter | 20010222 |
Method CONVERT_TO_LOCAL_TIMEZONE Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_FROM | Call by reference | Type reference (TYPE) | EEDMDATEFROM | Struktur für Ab-Datum | 20010220 | ||
2 | ![]() |
X_TIMEZONE | Call by reference | Type reference (TYPE) | TIMEZONE | Zeitzone | 20010220 | ||
3 | ![]() |
Y_LOCAL_FROM | Call by reference | Type reference (TYPE) | EEDMDATEFROM | Struktur für Ab-Datum in sy-zonlo | 20010220 |
Method CONVERT_TO_LOCAL_TIMEZONE on class CL_ISU_EDM_SETTLPROCESS has no exception.
Method CREATE_ASSIGN_DEVICE Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_DEVICE_TEMPLATE | Call by reference | Type reference (TYPE) | REG42_INTERFACE | Umbau Gerät: Interfacedaten | 20010917 | ||
2 | ![]() |
X_INT_UI | Call by reference | Type reference (TYPE) | INT_UI | Interner Schlüssel des Zählpunkts | 20010917 | ||
3 | ![]() |
YT_ETDZ | Call by reference | Type reference (TYPE) | ISU07_IETDZ | Tabellentyp für die tabelle etdz | 20010917 | ||
4 | ![]() |
Y_DEVICE_CREATED | Call by reference | Type reference (TYPE) | KENNZX | Geräteinfosatz wurde erzeugt | 20010917 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Fehler bei der Verarbeitung | 20010917 |
Method CREATE_ASSIGN_PROFILE Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
XY_PROFILE_NO | Call by reference | Type reference (TYPE) | E_PROFILE | Nummer des zugeordneten Profils | 20010921 | ||
2 | ![]() |
X_CONTEXTCATEGORY | Call by reference | Type reference (TYPE) | E_EDMSETTLCONTEXTCATEGORY | Kontexttyp für Rolle einer Profilzuordnung | 20010917 | ||
3 | ![]() |
X_ETDZ | Call by reference | Type reference (TYPE) | ETDZ | Zählwerksdaten | 20010918 | ||
4 | ![]() |
X_PROFILE_HEAD | Call by reference | Type reference (TYPE) | EPROFHEAD_DATA | Struktur für die Kopfdaten eines Profils | 20010917 | ||
5 | ![]() |
X_PROFILE_TXT | Call by reference | Type reference (TYPE) | E_PROFTEXT | Profilbezeichnung | 20010917 | ||
6 | ![]() |
X_PROFROLE | Call by reference | Type reference (TYPE) | PROFROLE | Rolle einer Profilzuordnung | 20010917 | ||
7 | ![]() |
X_PROFROLECONTEXT | Call by reference | Type reference (TYPE) | PROFROLECONTEXT | Kontext für Rolle einer Profilzuordnung | 20010917 | ||
8 | ![]() |
Y_NOT_ASSIGNED | Call by reference | Type reference (TYPE) | KENNZX | Profil konnte nicht zugeordnet werden | 20010921 | ||
9 | ![]() |
Y_PROFILE_CREATED | Call by reference | Type reference (TYPE) | KENNZX | Profil wurde erzeugt | 20010917 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Fehler bei der Verarbeitung | 20010917 |
Method CREATE_PROFILE_PARAMETER Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
XY_PROFILE | Call by reference | Type reference (TYPE) | EEDMSETTLPROCESSPAR_PROFILE | Profilparameter des Bilanzierungsverfahrens | 20010913 | ||
2 | ![]() |
X_DEVICE_TEMPLATE | Call by reference | Type reference (TYPE) | REG42_INTERFACE | Umbau Gerät: Interfacedaten | 20010913 | ||
3 | ![]() |
X_FROM | Call by reference | Type reference (TYPE) | EEDMDATEFROM | Ab-Datum/Zeit | 20010913 | ||
4 | ![]() |
X_PARNAME | Call by reference | Type reference (TYPE) | E_EDMSETTLPARNAME | Name des Parameters für Bilanzierungsschritte | 20010913 | ||
5 | ![]() |
X_TIMEZONE | Call by reference | Type reference (TYPE) | TIMEZONE | SY-ZONLO | Zeitzone der Bilanzierung | 20010913 | |
6 | ![]() |
X_TO | Call by reference | Type reference (TYPE) | EEDMDATETO | Bis-Datum/Zeit | 20010913 | ||
7 | ![]() |
Y_DEVICE_CREATED | Call by reference | Type reference (TYPE) | KENNZX | Geräteinfosatz wurde erzeugt | 20010913 | ||
8 | ![]() |
Y_EGER | Call by reference | Type reference (TYPE) | V_EGER | Generierte Tabelle zum View V_EGER | 20010919 | ||
9 | ![]() |
Y_ETDZ | Call by reference | Type reference (TYPE) | ETDZ | Technische Daten eingebautes Zählwerk | 20010919 | ||
10 | ![]() |
Y_PROFILE_CREATED | Call by reference | Type reference (TYPE) | KENNZX | Profil wurde erzeugt und zugeordnet | 20010917 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Fehler bei der Verarbeitung | 20010913 | |
2 | ![]() |
Profilparameter existiert bereits | 20010921 | |
3 | ![]() |
Profil nicht gefunden | 20010913 | |
4 | ![]() |
Parametername nicht definiert für Bilanzierungsverfahren | 20010913 | |
5 | ![]() |
optionaler Parameter nicht gefunden | 20010913 | |
6 | ![]() |
Parameterselektion ist nicht eindeutig | 20010913 | |
7 | ![]() |
Netz-ID wurde nicht angegeben | 20010913 | |
8 | ![]() |
Bilanzierungseinheit wurde nicht angegeben | 20010913 |
Method CREATE_SETTLDOCRUN Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_SETTLDOC | Call by reference | Type reference (TYPE) | E_EDMSETTLDOC | Bilanzierungsbeleg (Nummer) | 20010307 | ||
2 | ![]() |
X_SETTLDOCRUN | Call by reference | Type reference (TYPE) | E_EDMSETTLDOCRUN | Laufnummer zu einer Bilanzierung | 20010307 | ||
3 | ![]() |
YT_SETTLUNIT | Call by reference | Type reference (TYPE) | T_SETTLUNIT | Liste von Bilanzierungseinheiten | 20010307 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Fehler bei der Verarbeitung | 20010307 |
Method GET_ASSIGNED_PROFILES Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
XYT_LOGIKZW | Call by reference | Type reference (TYPE) | ILOGIKZW_TAB | Logische Zählwerke zum Zählpunkt | 20010227 | ||
2 | ![]() |
X_FOR_ALL_LOGIKNR | Call by reference | Type reference (TYPE) | KENNZX | Berücksichtige alle Zählwerke | 20010227 | ||
3 | ![]() |
X_FROM | Call by reference | Type reference (TYPE) | EEDMDATEFROM | Ab-Datum/Zeit | 20010220 | ||
4 | ![]() |
X_INT_UI | Call by reference | Type reference (TYPE) | INT_UI | Interner Schlüssel des Zählpunkts | 20010219 | ||
5 | ![]() |
X_PROFROLE | Call by reference | Type reference (TYPE) | PROFROLE | Rolle einer Profilzuordnung | 20010219 | ||
6 | ![]() |
X_TIMEZONE | Call by reference | Type reference (TYPE) | TIMEZONE | Zeitzone der Bilanzierung | 20010220 | ||
7 | ![]() |
X_TO | Call by reference | Type reference (TYPE) | EEDMDATETO | Bis-Datum/Zeit | 20010220 | ||
8 | ![]() |
YT_PROFASS | Call by reference | Type reference (TYPE) | IEPROFASS | Zuordnung von Profilen | 20010219 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Unbekannter Fehler | 20010219 | |
2 | ![]() |
Kein Profil zugeordnet | 20010219 | |
3 | ![]() |
Profilzuordnung nicht eindeutig | 20010219 |
Method GET_DEPENDENT_GRIDS Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
XT_GRID_ID | Call by reference | Type reference (TYPE) | T_GRID | Tablle zu GRID_ID | 20010426 | ||
2 | ![]() |
YT_EGRID | Call by reference | Type reference (TYPE) | IEGRID | Tabellentyp zu EGRID | 20010426 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Fehler bei der Verarbeitung | 20010426 |
Method GET_EXT_POD Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_INT_UI | Call by reference | Type reference (TYPE) | INT_UI | Interner Schlüssel des Zählpunkts | 20010918 | ||
2 | ![]() |
Y_EXT_UI | Value transfer | Type reference (TYPE) | EXT_UI | Zählpunktbezeichnung | 20010918 |
Method GET_EXT_POD on class CL_ISU_EDM_SETTLPROCESS has no exception.
Method GET_PROFILES_TO_SEND Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_FROM | Call by reference | Type reference (TYPE) | EEDMDATEFROM | Struktur für Ab-Datum | 20010227 | ||
2 | ![]() |
X_SERVICE_PROV | Call by reference | Type reference (TYPE) | SERVICE_PROV | Serviceanbieter | 20010227 | ||
3 | ![]() |
X_TIMEZONE | Call by reference | Type reference (TYPE) | TIMEZONE | Zeitzone der Bilanzierung | 20010227 | ||
4 | ![]() |
X_TO | Call by reference | Type reference (TYPE) | EEDMDATETO | Bia-Datum/Zeit | 20010227 | ||
5 | ![]() |
YT_PROFILE | Call by reference | Type reference (TYPE) | IEPROFASS | Tabelle mit zugeordneten Profilparametern | 20010227 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Profil nicht gefunden | 20010227 | |
2 | ![]() |
Zählpunkt zum Serviceanbieter konnte nicht ermittelt werden | 20010227 | |
3 | ![]() |
keine Rollen zum Versenden definiert | 20010227 |
Method GET_PROFILE_PARAMETER Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
XT_GRID_ID | Call by reference | Type reference (TYPE) | T_GRID | Netz in der Versorgungswirtschaft | 20010212 | ||
2 | ![]() |
XT_REFPROFILE | Call by reference | Type reference (TYPE) | T_EEDMSETTLCUSTGRP | Refprofile auswerten (z.B. Kundengruppe) | 20010212 | ||
3 | ![]() |
XT_SETTLUNIT | Call by reference | Type reference (TYPE) | T_SETTLUNIT | Liste von Bilanzierungseinheiten | 20010212 | ||
4 | ![]() |
X_CONTINUE_AFTER_ERROR | Call by reference | Type reference (TYPE) | KENNZX | Parameterfindung nach Fehler ohne Exception fortsetzen | 20010327 | ||
5 | ![]() |
X_FROM | Call by reference | Type reference (TYPE) | EEDMDATEFROM | Ab-Datum/Zeit | 20010220 | ||
6 | ![]() |
X_PARNAME | Call by reference | Type reference (TYPE) | E_EDMSETTLPARNAME | Name des Parameters für Bilanzierungsschritte | 20010212 | ||
7 | ![]() |
X_TIMEZONE | Call by reference | Type reference (TYPE) | TIMEZONE | Zeitzone der Bilanzierung | 20010220 | ||
8 | ![]() |
X_TO | Call by reference | Type reference (TYPE) | EEDMDATETO | Bia-Datum/Zeit | 20010220 | ||
9 | ![]() |
YT_ERROR | Call by reference | Type reference (TYPE) | T_EEDMSETTLMSG | Tabelle mit Fehlermeldungen wenn x_continue_after_error = 'X | 20010327 | ||
10 | ![]() |
YT_MISSING_PROFILE | Call by reference | Type reference (TYPE) | T_SETTLPROCESSPAR_PROFILE | Tabelle mit Profilparametern des Bilanzierungsverfahrens | 20010308 | ||
11 | ![]() |
YT_PROFILE | Call by reference | Type reference (TYPE) | T_SETTLPROCESSPAR_PROFILE | Tabelle mit Profilparametern des Bilanzierungsverfahrens | 20010212 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Profil nicht gefunden | 20010212 | |
2 | ![]() |
Parametername nicht definiert für Bilanzierungsverfahren | 20010212 | |
3 | ![]() |
Netz-ID wurde nicht angegeben | 20010212 | |
4 | ![]() |
Bilanzierungseinheit wurde nicht angegeben | 20010212 |
Method GET_PROFILE_PARAMETER_DEF Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_PARNAME | Call by reference | Type reference (TYPE) | E_EDMSETTLPARNAME | Name des Parameters für Bilanzierungsschritte | 20010906 | ||
2 | ![]() |
Y_PROFILE_PARAMETER | Call by reference | Type reference (TYPE) | EEDMSETTLPROCPAG | Profilparameter des Bilanzierungsverfahrens | 20010906 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Profil nicht gefunden | 20010906 | |
2 | ![]() |
Parametername nicht definiert für Bilanzierungsverfahren | 20010906 |
Method GET_PROFILE_PARAMETER_SINGLE Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_FROM | Call by reference | Type reference (TYPE) | EEDMDATEFROM | Ab-Datum/Zeit | 20010220 | ||
2 | ![]() |
X_GRID_ID | Call by reference | Type reference (TYPE) | GRID_ID | Netz in der Versorgungswirtschaft | 20010212 | ||
3 | ![]() |
X_PARNAME | Call by reference | Type reference (TYPE) | E_EDMSETTLPARNAME | Name des Parameters für Bilanzierungsschritte | 20010212 | ||
4 | ![]() |
X_REFPROFILE | Call by reference | Type reference (TYPE) | E_REFPROFILE | Refprofile auswerten (z.B. Kundengruppe) | 20010212 | ||
5 | ![]() |
X_SETTLUNIT | Call by reference | Type reference (TYPE) | E_EDMSETTLUNIT | Bilanzierungseinheit | 20010212 | ||
6 | ![]() |
X_TIMEZONE | Call by reference | Type reference (TYPE) | TIMEZONE | Zeitzone der Bilanzierung | 20010220 | ||
7 | ![]() |
X_TO | Call by reference | Type reference (TYPE) | EEDMDATETO | Bis-Datum/Zeit | 20010220 | ||
8 | ![]() |
Y_PROFILE | Call by reference | Type reference (TYPE) | EEDMSETTLPROCESSPAR_PROFILE | Profilparameter des Bilanzierungsverfahrens | 20010212 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Profil nicht gefunden | 20010212 | |
2 | ![]() |
Parametername nicht definiert für Bilanzierungsverfahren | 20010212 | |
3 | ![]() |
optionaler Parameter nicht gefunden | 20010308 | |
4 | ![]() |
Parameterselektion ist nicht eindeutig | 20010220 | |
5 | ![]() |
Netz-ID wurde nicht angegeben | 20010212 | |
6 | ![]() |
Bilanzierungseinheit wurde nicht angegeben | 20010212 |
Method GET_PROFROLETXT Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_PROFROLE | Call by reference | Type reference (TYPE) | PROFROLE | Rolle einer Profilzuordnung | 20010221 | ||
2 | ![]() |
Y_PROFROLETXT | Value transfer | Type reference (TYPE) | PROFROLETXT | Bezeichnung der Rolle einer Profilzuordnung | 20010221 |
Method GET_PROFROLETXT on class CL_ISU_EDM_SETTLPROCESS has no exception.
Method GET_REFPROFILE Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_PROFILE | Call by reference | Type reference (TYPE) | E_PROFILE | Nummer des EDM-Profils | 20010221 | ||
2 | ![]() |
Y_REFPROFILE | Value transfer | Type reference (TYPE) | E_REFPROFILE | Nummer des EDM-Profils auf das referenziert wird | 20010221 |
Method GET_REFPROFILE on class CL_ISU_EDM_SETTLPROCESS has no exception.
Method GET_REGISTER Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_INT_UI | Call by reference | Type reference (TYPE) | INT_UI | Interner Schlüssel des Zählpunkts | 20010913 | ||
2 | ![]() |
X_LOCAL_FROM | Call by reference | Type reference (TYPE) | EEDMDATEFROM | Struktur für Ab-Datum | 20010913 | ||
3 | ![]() |
X_LOCAL_TO | Call by reference | Type reference (TYPE) | EEDMDATETO | Struktur für Bis-Datum | 20010913 | ||
4 | ![]() |
YT_ETDZ | Call by reference | Type reference (TYPE) | ISU07_IETDZ | Tabellentyp für die tabelle etdz | 20010913 | ||
5 | ![]() |
YT_LOGIKZW | Call by reference | Type reference (TYPE) | ILOGIKZW_TAB | Logisch Zählwerke | 20010913 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Fehler bei der Verarbeitung | 20010913 | |
2 | ![]() |
Kein Zählwerk gefunden | 20010913 |
Method GET_SELECTION Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_SETTLPROCESS | Call by reference | Type reference (TYPE) | E_EDMSETTLPROCESS | Bilanzierungsverfahren | 20010820 | ||
2 | ![]() |
YT_SELTYPE | Call by reference | Type reference (TYPE) | T_EEDMSELTYPE | Daten zur Selektionssteuerung in der Bilanzierung | 20010820 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Fehler beim Lesen | 20010820 | |
2 | ![]() |
Bilanzierungsverfahren nicht bekannt | 20010820 |
Method GET_SERVPROV_TEXT Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_SERVICE_PROV | Call by reference | Type reference (TYPE) | SERVICE_PROV | Serviceanbieter | 20010227 | ||
2 | ![]() |
Y_SERVICE_PROV_TEXT | Value transfer | Type reference (TYPE) | SERVICE_PROV_TEXT | Name des Serviceanbieters | 20010227 |
Method GET_SERVPROV_TEXT on class CL_ISU_EDM_SETTLPROCESS has no exception.
Method GET_SETTLPARTXT Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_PARNAME | Call by reference | Type reference (TYPE) | E_EDMSETTLPARNAME | Name des Parameters für Bilanzierungsschritte | 20010301 | ||
2 | ![]() |
Y_SETTLPARTXT | Value transfer | Type reference (TYPE) | E_EDMSETTLPARTXT | Bezeichnung des Parameters im Bilanzierungsverfahren | 20010301 |
Method GET_SETTLPARTXT on class CL_ISU_EDM_SETTLPROCESS has no exception.
Method GET_TEMPLATE_PROFILE Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_PARNAME | Call by reference | Type reference (TYPE) | E_EDMSETTLPARNAME | Name des Parameters für Bilanzierungsschritte | 20010222 | ||
2 | ![]() |
Y_PROFHEAD | Value transfer | Type reference (TYPE) | EPROFHEAD_DATA | Struktur mit Kopfdaten des Musterprofils | 20010222 | ||
3 | ![]() |
Y_PROFILE | Value transfer | Type reference (TYPE) | E_PROFILE | Nummer des EDM-Profils | 20010323 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Musterprofil nicht gefunden | 20010222 | |
2 | ![]() |
Musterprofil ist nicht gültig | 20010921 |
Method GET_VALUE_PARAMETER Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_PARNAME | Call by reference | Type reference (TYPE) | E_EDMSETTLPARNAME | Name des Parameters für Bilanzierungsschritte | 20010212 | ||
2 | ![]() |
YT_VALUE | Call by reference | Type reference (TYPE) | T_SETTLPROCESSPAR_VALUE | Tabelle mit Werteparametern des Bilanzierungsverfahrens | 20010212 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Wert nicht gefunden | 20010212 | |
2 | ![]() |
Parametername nicht definiert für Bilanzierungsverfahren | 20010212 |
Method IS_SETTLPROCESS_INPUT Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_PARNAME | Call by reference | Type reference (TYPE) | E_EDMSETTLPARNAME | Name des Parameters für Bilanzierungsschritte | 20010212 | ||
2 | ![]() |
Y_IS_INPUT | Value transfer | Type reference (TYPE) | KENNZX | Parameter is ein Eingabeparameter | 20010212 |
Method IS_SETTLPROCESS_INPUT on class CL_ISU_EDM_SETTLPROCESS has no exception.
Method IS_SETTLPROCESS_OUTPUT Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_PARNAME | Call by reference | Type reference (TYPE) | E_EDMSETTLPARNAME | Name des Parameters für Bilanzierungsschritte | 20010313 | ||
2 | ![]() |
Y_IS_OUTPUT | Value transfer | Type reference (TYPE) | KENNZX | Parameter is ein Ergebnisparameter | 20010313 |
Method IS_SETTLPROCESS_OUTPUT on class CL_ISU_EDM_SETTLPROCESS has no exception.
Method IS_SETTLPROCESS_PARAMETER Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_PARNAME | Call by reference | Type reference (TYPE) | E_EDMSETTLPARNAME | Name des Parameters für Bilanzierungsschritte | 20010212 | ||
2 | ![]() |
Y_IS_PARAMETER | Value transfer | Type reference (TYPE) | KENNZX | Parameter is ein Verfahrensparameter | 20010212 |
Method IS_SETTLPROCESS_PARAMETER on class CL_ISU_EDM_SETTLPROCESS has no exception.
Method POD_OF_GRID Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_GRID_ID | Call by reference | Type reference (TYPE) | GRID_ID | Versorgungsnetz | 20010212 | ||
2 | ![]() |
Y_INT_UI | Value transfer | Type reference (TYPE) | INT_UI | Interner Schlüssel des Zählpunkts | 20010212 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
kein Zählpunkt definiert | 20010212 |
Method POD_OF_SERVPROV Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_FROM | Call by reference | Type reference (TYPE) | EEDMDATEFROM | Struktur für Ab-Datum | 20010305 | ||
2 | ![]() |
X_SERVICE_PROV | Call by reference | Type reference (TYPE) | SERVICE_PROV | Serviceanbieter | 20010227 | ||
3 | ![]() |
X_TIMEZONE | Call by reference | Type reference (TYPE) | TIMEZONE | Zeitzone der Bilanzierung | 20010305 | ||
4 | ![]() |
X_TO | Call by reference | Type reference (TYPE) | EEDMDATETO | Struktur für Bis-Datum | 20010305 | ||
5 | ![]() |
YT_INT_UI | Value transfer | Type reference (TYPE) | INT_UI_TABLE | Interner Schlüssel des Zählpunkts | 20010227 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Fehler beim Lesen | 20010305 | |
2 | ![]() |
kein Zählpunkt gefunden | 20010227 |
Method POD_OF_SETTLPROCESS Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
Y_INT_UI | Value transfer | Type reference (TYPE) | INT_UI | Interner Schlüssel des Zählpunkts | 20010212 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
kein Zählpunkt definiert | 20010212 |
Method POD_OF_SETTLUNIT Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_SETTLUNIT | Call by reference | Type reference (TYPE) | E_EDMSETTLUNIT | Bilanzierungseinheit | 20010212 | ||
2 | ![]() |
Y_INT_UI | Value transfer | Type reference (TYPE) | INT_UI | Interner Schlüssel des Zählpunkts | 20010212 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
kein Zählpunkt definiert | 20010212 |
Method READ_CONFIGURATION Signature
Method READ_CONFIGURATION on class CL_ISU_EDM_SETTLPROCESS has no parameter.
Method READ_CONFIGURATION on class CL_ISU_EDM_SETTLPROCESS has no exception.
Method SELECT_ALL_GRIDS Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
YT_GRID_ID | Call by reference | Type reference (TYPE) | T_GRID | Tablle zu GRID_ID | 20010404 |
Method SELECT_ALL_GRIDS on class CL_ISU_EDM_SETTLPROCESS has no exception.
Method SELECT_DIFFERENT_SETTLDOC Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
YT_EEDMSETTLDOC | Call by reference | Type reference (TYPE) | T_EEDMSETTLDOC | Bilanzierungsbeleg (Kopf) | 20010404 |
Method SELECT_DIFFERENT_SETTLDOC on class CL_ISU_EDM_SETTLPROCESS has no exception.
Method SELECT_EEDMSETTLPROCRI Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_SETTLPROCESS | Call by reference | Type reference (TYPE) | E_EDMSETTLPROCESS | Bilanzierungsverfahren | 20010212 | ||
2 | ![]() |
YT_EEDMSETTLPROCRI | Call by reference | Type reference (TYPE) | T_EEDMSETTLPROCRI | Rollen der Profilzuordnung | 20010212 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
keine Rollen definiert | 20010212 |
Method SELECT_EEDMSETTLPROCRR Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_SETTLPROCESS | Call by reference | Type reference (TYPE) | E_EDMSETTLPROCESS | Bilanzierungsverfahren | 20010212 | ||
2 | ![]() |
YT_EEDMSETTLPROCRR | Call by reference | Type reference (TYPE) | T_EEDMSETTLPROCRR | Rollen der Profilzuordnung | 20010212 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
keine Rollen definiert | 20010212 |
Method SELECT_EEDMSETTLPROCRS Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_SETTLPROCESS | Call by reference | Type reference (TYPE) | E_EDMSETTLPROCESS | Bilanzierungsverfahren | 20010227 | ||
2 | ![]() |
YT_EEDMSETTLPROCRS | Call by reference | Type reference (TYPE) | T_EEDMSETTLPROCRS | Rollen für Profile zum Versenden | 20010227 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
keine Rollen definiert | 20010227 |
Method SELECT_EEDMSETTLPROCSER Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_SETTLPROCESS | Call by reference | Type reference (TYPE) | E_EDMSETTLPROCESS | Bilanzierungsverfahren | 20010820 | ||
2 | ![]() |
YT_EEDMSETTLPROCSER | Call by reference | Type reference (TYPE) | T_EEDMSETTLPROCSER | Tabellentyp zu eedmsettlprocser | 20010820 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
keine Serviceart gefunden | 20010820 |
Method SELECT_ESETTLPROCPA Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_SETTLPROCESS | Call by reference | Type reference (TYPE) | E_EDMSETTLPROCESS | Bilanzierungsverfahren | 20010212 | ||
2 | ![]() |
YT_PARAMETER | Call by reference | Type reference (TYPE) | T_EEDMSETTLPROCESSPAR | Tabelle mit Parameterdefinition des Bilanzierungsverfahrens | 20010212 |
Method SELECT_ESETTLPROCPA on class CL_ISU_EDM_SETTLPROCESS has no exception.
Method SELECT_PROFROLE Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_SETTLPROCESS | Call by reference | Type reference (TYPE) | E_EDMSETTLPROCESS | Bilanzierungsverfahren | 20010212 | ||
2 | ![]() |
YT_EEDMSETTLPROCRI | Call by reference | Type reference (TYPE) | T_EEDMSETTLPROCRI | Tabelletyp zu EEDMSETTLPROCRI | 20010212 | ||
3 | ![]() |
YT_EEDMSETTLPROCRR | Call by reference | Type reference (TYPE) | T_EEDMSETTLPROCRR | Tabelletyp zu EEDMSETTLPROCRR | 20010212 | ||
4 | ![]() |
YT_EEDMSETTLPROCRS | Call by reference | Type reference (TYPE) | T_EEDMSETTLPROCRS | Tabelletyp zu EEDMSETTLPROCRS | 20010227 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Fehler beim Lesen | 20010212 | |
2 | ![]() |
Bilanzierungsverfahren nicht bekannt | 20010212 |
Method SEND_PROFILES Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
XT_PROFILE | Call by reference | Type reference (TYPE) | T_EEDMSETTL_SNDPROFILE | Profile zum Versenden | 20010305 | ||
2 | ![]() |
X_CONTINUE_AFTER_ERROR | Call by reference | Type reference (TYPE) | KENNZX | Senden der weiteren Profile fortsetzen | 20010306 | ||
3 | ![]() |
X_RECEIVER | Call by reference | Type reference (TYPE) | SERVICE_PROV | Serviceanbieter | 20010305 | ||
4 | ![]() |
X_SENDER | Call by reference | Type reference (TYPE) | SERVICE_PROV | Serviceanbieter | 20010305 | ||
5 | ![]() |
X_SETTLDOC | Call by reference | Type reference (TYPE) | E_EDMSETTLDOC | Bilanzierungsbeleg (Nummer) | 20010330 | ||
6 | ![]() |
YT_ERROR_LOG | Call by reference | Type reference (TYPE) | T_EEDMSETTLMSG | allgemeine Fehlermeldungen | 20010305 | ||
7 | ![]() |
YT_NOT_SENT_PROFILE | Call by reference | Type reference (TYPE) | T_EEDMSETTL_SNDPROFILE | Profile, die nicht versendet werden konnten | 20010305 | ||
8 | ![]() |
YT_PROFHEAD | Call by reference | Type reference (TYPE) | TEPROFHEAD | Kopfdaten der versendeten Profile | 20010305 |
Method SEND_PROFILES on class CL_ISU_EDM_SETTLPROCESS has no exception.
Method START_STEP Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
XT_IMPPROFILES | Call by reference | Type reference (TYPE) | T_SETTLSTEPPAR_CONTPROFILE | Tabelle mit Profilparametern für Bilanzierungsschritte | 20010307 | ||
2 | ![]() |
XT_IMPVALUES | Call by reference | Type reference (TYPE) | T_SETTLSTEPPAR_CONTVALUE | Tabelle mit Werteparametern für Bilanzierungsschritte | 20010307 | ||
3 | ![]() |
XT_SETTLUNITS | Call by reference | Type reference (TYPE) | T_SETTLUNIT | Liste von Bilanzierungseinheiten | 20010307 | ||
4 | ![]() |
XY_SETTLSTEPLEVEL | Call by reference | Type reference (TYPE) | E_SETTLSTEPLEVEL | Ebene der Bilanzierungsschrittbearbeitung | 20010307 | ||
5 | ![]() |
X_DETAILLOG | Call by reference | Type reference (TYPE) | KENNZX | 'X' | Kennzeichen | 20010307 | |
6 | ![]() |
X_SETTLSTEP | Call by reference | Type reference (TYPE) | E_EDMSETTLSTEP | Bilanzierungsschritt | 20010307 | ||
7 | ![]() |
X_SETTLSTEPNO | Call by reference | Type reference (TYPE) | E_EDMSETTLSTEP_NO | Nummer des Bilanzierungsschritts | 20010307 | ||
8 | ![]() |
X_SETTLUNIT | Call by reference | Type reference (TYPE) | E_EDMSETTLUNIT | Bilanzierungseinheit | 20010307 | ||
9 | ![]() |
YT_EXPPROFILES | Call by reference | Type reference (TYPE) | T_SETTLSTEPPAR_CONTPROFILE | Tabelle mit Profilparametern für Bilanzierungsschritte | 20010307 | ||
10 | ![]() |
YT_EXPVALUES | Call by reference | Type reference (TYPE) | T_SETTLSTEPPAR_CONTVALUE | Tabelle mit Werteparametern für Bilanzierungsschritte | 20010307 | ||
11 | ![]() |
Y_COMPLETED_WITH_WARNINGS | Call by reference | Type reference (TYPE) | KENNZX | Returnparameter | 20010307 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Fehler bei der Verarbeitung | 20010307 | |
2 | ![]() |
Bilanzierungslauf gestoppt | 20010427 |
Method START_STEP_TESTMODE Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
XT_IMPPROFILES | Call by reference | Type reference (TYPE) | T_SETTLSTEPPAR_CONTPROFILE | Tabelle mit Profilparametern für Bilanzierungsschritte | 20010612 | ||
2 | ![]() |
XT_IMPVALUES | Call by reference | Type reference (TYPE) | T_SETTLSTEPPAR_CONTVALUE | Tabelle mit Werteparametern für Bilanzierungsschritte | 20010612 | ||
3 | ![]() |
XT_SETTLUNITS | Call by reference | Type reference (TYPE) | T_SETTLUNIT | Liste von Bilanzierungseinheiten | 20010612 | ||
4 | ![]() |
XY_SETTLSTEPLEVEL | Call by reference | Type reference (TYPE) | E_SETTLSTEPLEVEL | '0' | Ebene der Bilanzierungsschrittbearbeitung | 20010612 | |
5 | ![]() |
X_DATEFROM | Call by reference | Type reference (TYPE) | E_EDMDATEFROM | Ab-Datum | 20010612 | ||
6 | ![]() |
X_DATETO | Call by reference | Type reference (TYPE) | E_EDMDATETO | Bis-Datum | 20010612 | ||
7 | ![]() |
X_DETAILLOG | Call by reference | Type reference (TYPE) | KENNZX | 'X' | Kennzeichen | 20010612 | |
8 | ![]() |
X_SETTLDOC | Call by reference | Type reference (TYPE) | E_EDMSETTLDOC | Bilanzierungsbeleg | 20010612 | ||
9 | ![]() |
X_SETTLSTEP | Call by reference | Type reference (TYPE) | E_EDMSETTLSTEP | Bilanzierungsschritt | 20010612 | ||
10 | ![]() |
X_SETTLUNIT | Call by reference | Type reference (TYPE) | E_EDMSETTLUNIT | Bilanzierungseinheit | 20010612 | ||
11 | ![]() |
X_TIMEFROM | Call by reference | Type reference (TYPE) | E_EDMTIMEFROM | '000000' | Ab-Zeit | 20010612 | |
12 | ![]() |
X_TIMETO | Call by reference | Type reference (TYPE) | E_EDMTIMETO | '235959' | Bis-Zeit | 20010612 | |
13 | ![]() |
YT_EXPPROFILES | Call by reference | Type reference (TYPE) | T_SETTLSTEPPAR_CONTPROFILE | Tabelle mit Profilparametern für Bilanzierungsschritte | 20010612 | ||
14 | ![]() |
YT_EXPVALUES | Call by reference | Type reference (TYPE) | T_SETTLSTEPPAR_CONTVALUE | Tabelle mit Werteparametern für Bilanzierungsschritte | 20010612 | ||
15 | ![]() |
Y_COMPLETED_WITH_WARNINGS | Call by reference | Type reference (TYPE) | KENNZX | Returnparameter | 20010612 |
# | Exception | Resumable | Description | Created on |
---|---|---|---|---|
1 | ![]() |
Fehler bei der Verarbeitung | 20010612 | |
2 | ![]() |
Bilanzierungslauf gestoppt | 20010612 |
Method USED_INTSIZEID Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
X_INTSIZEID | Value transfer | Type reference (TYPE) | E_EDMSETTLINTSIZEID | Identifikation der Intervalllänge | 20010215 |
Method USED_INTSIZEID on class CL_ISU_EDM_SETTLPROCESS has no exception.
Method USED_VERSION_REASON Signature
# | Type | Parameter | Pass Value | Optional | Typing Method | Associated Type | Default value | Description | Created on |
---|---|---|---|---|---|---|---|---|---|
1 | ![]() |
Y_VERSREASON | Value transfer | Type reference (TYPE) | E_EDMSETTLVERSREASON | Grund verwendet für Erstellung einer Profilversion | 20010215 |
Method USED_VERSION_REASON on class CL_ISU_EDM_SETTLPROCESS has no exception.
Method WIZARD_SETTLPARA_START Signature
Method WIZARD_SETTLPARA_START on class CL_ISU_EDM_SETTLPROCESS has no parameter.
Method WIZARD_SETTLPARA_START on class CL_ISU_EDM_SETTLPROCESS has no exception.
History
Last changed by/on | SAP | 20050224 |
SAP Release Created in | 463 |