Where Used List (Class) for SAP ABAP Table/Structure Field UC0_S_MESSAGE-FIELDNAME (UC0_S_MESSAGE)
SAP ABAP Table/Structure Field UC0_S_MESSAGE - FIELDNAME (UC0_S_MESSAGE) is used by
# | Object Type | Object Name | Object Description | Package | Structure Package | Software Component |
---|---|---|---|---|---|---|
1 | Class |
CL_UC_AREA_TX_DATA_BD_CHECK Method: CHECK_DATA
|
Check/Create Consistency of Reported Financial Data | UCM0 | SEM-BW | SEM-BW |
2 | Class |
CL_UC_AREA_TX_DATA_BD_CHECK Method: CHECK_RECORD_STATE
|
Check/Create Consistency of Reported Financial Data | UCM0 | SEM-BW | SEM-BW |
3 | Class |
CL_UC_AREA_TX_DATA_BD_CHECK Method: GET_DATASTREAMS
|
Check/Create Consistency of Reported Financial Data | UCM0 | SEM-BW | SEM-BW |
4 | Class |
CL_UC_AREA_TX_DATA_BD_CHECK Method: NORMALIZE_BREAKDOWNS
|
Check/Create Consistency of Reported Financial Data | UCM0 | SEM-BW | SEM-BW |
5 | Class |
CL_UC_AREA_TX_DATA_BD_CHECK Method: GET_GUI_FIELDS
|
Check/Create Consistency of Reported Financial Data | UCM0 | SEM-BW | SEM-BW |
6 | Class |
CL_UC_ASSET_MANAGER Method: MESSAGE_APPEND
|
Processing of Asset Master Data | UCFD | SEM-BW | SEM-BW |
7 | Class |
CL_UC_BCF Method: MESSAGE_APPEND_P
|
Balance Carryforward | UCF9 | SEM-BW | SEM-BW |
8 | Class |
CL_UC_COI_AFD_GW Method: GW_CHECK
|
C/I Additional Financial Data: Goodwill | UCF6 | SEM-BW | SEM-BW |
9 | Class |
CL_UC_COMPOUND Method: CHECK
|
Combined Selection Conditions/Target Assignments | UCT5 | SEM-BW | SEM-BW |
10 | Class |
CL_UC_CTR_MESSAGE Method: STORE_SYST
|
C/T: Messages | UCF2 | SEM-BW | SEM-BW |
11 | Class | CL_UC_CTR_MESSAGE | C/T: Messages | UCF2 | SEM-BW | SEM-BW |
12 | Class |
CL_UC_CTR_MESSAGE Method: STORE
|
C/T: Messages | UCF2 | SEM-BW | SEM-BW |
13 | Class |
CL_UC_DEFVAL Method: GET_ERROR_MESSAGE
|
Obsolete | UCM2 | SEM-BW | SEM-BW |
14 | Class |
CL_UC_DEFVAL_FACTORY Method: GET_SINGLE_DEFVAL
|
Default Values | UCM2 | SEM-BW | SEM-BW |
15 | Class |
CL_UC_DEFVAL_FACTORY Method: GET_ERROR_MESSAGE
|
Default Values | UCM2 | SEM-BW | SEM-BW |
16 | Class | CL_UC_DE_FRONTEND_GUI | Gui class for data entry frontend | UCFE | SEM-BW | SEM-BW |
17 | Class |
CL_UC_DOCUMENT_ANALYZE_2 Method: MESSAGE_APPEND_P
|
Document and Breakdown Check | UCD1 | SEM-BW | SEM-BW |
18 | Class |
CL_UC_DOCUMENT_ANALYZE_2 Method: CHECK_MSG_NOCOMBIVAL_P
|
Document and Breakdown Check | UCD1 | SEM-BW | SEM-BW |
19 | Class |
CL_UC_DOCUMENT_ANALYZE_2 Method: NORMALIZE_BREAKDOWN_GOODWILL_P
|
Document and Breakdown Check | UCD1 | SEM-BW | SEM-BW |
20 | Class |
CL_UC_DOCUMENT_ANALYZE_2 Method: CHECK_MSG_INIT_BREAKDOWN_P
|
Document and Breakdown Check | UCD1 | SEM-BW | SEM-BW |
21 | Class |
CL_UC_DOCUMENT_ANALYZE_2 Method: CHECK_MSG_NOCOMBIEX_P
|
Document and Breakdown Check | UCD1 | SEM-BW | SEM-BW |
22 | Class |
CL_UC_DOCUMENT_ANALYZE_2 Method: GET_REPUNIT_PROPERTIES_P
|
Document and Breakdown Check | UCD1 | SEM-BW | SEM-BW |
23 | Class |
CL_UC_LAYOUT_STEP Method: IF_UC_CUST_DATA_EXT~CHECK
|
Layout for Step Method | UCFL | SEM-BW | SEM-BW |
24 | Class |
CL_UC_MANUAL_DOCUMENT_GUI_1S Method: SET_DATA
|
For manual posting's new one screen design | UCF8 | SEM-BW | SEM-BW |
25 | Class |
CL_UC_MANUAL_DOCUMENT_GUI_1S Method: ON_DATA_CHANGED
|
For manual posting's new one screen design | UCF8 | SEM-BW | SEM-BW |
26 | Class |
CL_UC_MAPPING_EXECUTION Method: UTL_RAISE_MESSAGE
|
Mapping | UCT8 | SEM-BW | SEM-BW |
27 | Class |
CL_UC_METHOD_ALLOC Method: IF_UC_LAYOUT_STEP_CALLBACK~CHECK
|
Allocation Method | UCF1 | SEM-BW | SEM-BW |
28 | Class |
CL_UC_METHOD_CTR Method: CTR_CREATE_RUNTIME_OBJECTS
|
Currency Translation Method | UCF2 | SEM-BW | SEM-BW |
29 | Class |
CL_UC_METHOD_CTR Method: CTR_HANDLE_NET_INCOME
|
Currency Translation Method | UCF2 | SEM-BW | SEM-BW |
30 | Class |
CL_UC_METHOD_RECLASS Method: IF_UC_LAYOUT_STEP_CALLBACK~CHECK
|
Reclassification Method | UCF4 | SEM-BW | SEM-BW |
31 | Class |
CL_UC_METHOD_UPL Method: CHECK_DATA
|
Upload Methods: Runtime Aspect | UCF7 | SEM-BW | SEM-BW |
32 | Class |
CL_UC_METHOD_UPL Method: EXECUTE
|
Upload Methods: Runtime Aspect | UCF7 | SEM-BW | SEM-BW |
33 | Class |
CL_UC_METHOD_UPL Method: READ_DATA_FROM_FILE
|
Upload Methods: Runtime Aspect | UCF7 | SEM-BW | SEM-BW |
34 | Class |
CL_UC_METHOD_UPL Method: CHECK_DATA_LINE
|
Upload Methods: Runtime Aspect | UCF7 | SEM-BW | SEM-BW |
35 | Class |
CL_UC_METHOD_UPL Method: PREPARE_LOG
|
Upload Methods: Runtime Aspect | UCF7 | SEM-BW | SEM-BW |
36 | Class |
CL_UC_METHOD_UPL Method: MAPPING
|
Upload Methods: Runtime Aspect | UCF7 | SEM-BW | SEM-BW |
37 | Class |
CL_UC_METHOD_UPLOAD Method: UPL_INIT_FIELDCAT_PROPERTIES
|
Upload Method | UCF7 | SEM-BW | SEM-BW |
38 | Class |
CL_UC_METHOD_UPLOAD Method: UPL_CHECK_LOAD_MD_HRY
|
Upload Method | UCF7 | SEM-BW | SEM-BW |
39 | Class |
CL_UC_METHOD_UPL_ASSET Method: CHECK_DATA
|
Upload of Asset | UCF7 | SEM-BW | SEM-BW |
40 | Class |
CL_UC_METHOD_UPL_ASSET Method: RAISE_MSG_DONT_MODIFY
|
Upload of Asset | UCF7 | SEM-BW | SEM-BW |
41 | Class |
CL_UC_METHOD_UPL_COI Method: SET_UNIT_OF_KEY_FIGURE
|
Upload C/I data | UCF7 | SEM-BW | SEM-BW |
42 | Class |
CL_UC_METHOD_UPL_DOCUMENTS Method: SET_UNIT_OF_KEY_FIGURE
|
Flexible upload for documents | UCF7 | SEM-BW | SEM-BW |
43 | Class |
CL_UC_METHOD_UPL_DOCUMENTS Method: CHECK_DATA_LINE
|
Flexible upload for documents | UCF7 | SEM-BW | SEM-BW |
44 | Class |
CL_UC_METHOD_UPL_IPI2 Method: SET_UNIT_OF_KEY_FIGURE
|
Upload: IPI | UCF7 | SEM-BW | SEM-BW |
45 | Class |
CL_UC_METHOD_UPL_IPI2 Method: CHECK_DATA
|
Upload: IPI | UCF7 | SEM-BW | SEM-BW |
46 | Class |
CL_UC_METHOD_UPL_MD_EXT Method: _CM_CHECK_INITIAL_VALUE
|
Upload of Master Data for ECC Integration | UCF7 | SEM-BW | SEM-BW |
47 | Class |
CL_UC_METHOD_UPL_MD_EXT Method: _CH_CHECK_EDGE
|
Upload of Master Data for ECC Integration | UCF7 | SEM-BW | SEM-BW |
48 | Class |
CL_UC_METHOD_UPL_MD_EXT Method: _CH_CHECK_UPDATEMODE
|
Upload of Master Data for ECC Integration | UCF7 | SEM-BW | SEM-BW |
49 | Class |
CL_UC_METHOD_UPL_MD_EXT Method: _CM_CHECK_UPDATEMODE
|
Upload of Master Data for ECC Integration | UCF7 | SEM-BW | SEM-BW |
50 | Class |
CL_UC_METHOD_UPL_MD_EXT Method: _MP_MAP
|
Upload of Master Data for ECC Integration | UCF7 | SEM-BW | SEM-BW |
51 | Class |
CL_UC_METHOD_UPL_MD_EXT Method: _CI_CHECK_EDGE
|
Upload of Master Data for ECC Integration | UCF7 | SEM-BW | SEM-BW |
52 | Class |
CL_UC_METHOD_UPL_SUPPLY_SHARE Method: RAISE_MSG_DONT_MODIFY
|
Flexible Upload: Supply Share | UCF7 | SEM-BW | SEM-BW |
53 | Class |
CL_UC_METHOD_UPL_TOTALS Method: POST_DATA
|
Upload Reported Financial Data | UCF7 | SEM-BW | SEM-BW |
54 | Class |
CL_UC_METHOD_UPL_TOTALS Method: CHECK_DATA
|
Upload Reported Financial Data | UCF7 | SEM-BW | SEM-BW |
55 | Class |
CL_UC_METHOD_UPL_TOTALS Method: SET_UNIT_OF_KEY_FIGURE
|
Upload Reported Financial Data | UCF7 | SEM-BW | SEM-BW |
56 | Class |
CL_UC_MINICUBE Method: CHECK_DATA_EXISTENCE_P
|
Explicit Values | UCM1 | SEM-BW | SEM-BW |
57 | Class |
CL_UC_MINICUBE Method: CHECK_DATA_SELECTION_P
|
Explicit Values | UCM1 | SEM-BW | SEM-BW |
58 | Class |
CL_UC_SELCOND Method: CHECK_P
|
Selection Condition | UCT3 | SEM-BW | SEM-BW |
59 | Class |
CL_UC_SET Method: CHECK_OVERLAP_P
|
Ranges | UCT1 | SEM-BW | SEM-BW |
60 | Class |
CL_UC_SET Method: CHECK_RANGE_P
|
Ranges | UCT1 | SEM-BW | SEM-BW |
61 | Class |
CL_UC_SET Method: IF_UC_CUST_DATA_EXT~CHECK
|
Ranges | UCT1 | SEM-BW | SEM-BW |
62 | Class |
CL_UC_SINGLESELCOND Method: CHECK_OVERLAP_P
|
Selection Condition via Hierarchy Node | UCT2 | SEM-BW | SEM-BW |
63 | Class |
CL_UC_SINGLESELCOND Method: IF_UC_CUST_DATA_EXT~CHECK
|
Selection Condition via Hierarchy Node | UCT2 | SEM-BW | SEM-BW |
64 | Class |
CL_UC_SINGLESELCOND Method: CHECK_RANGE_P
|
Selection Condition via Hierarchy Node | UCT2 | SEM-BW | SEM-BW |
65 | Class |
CL_UC_STATUS_MANAGEMENT Method: COLLECT_MESSAGE
|
Status Management (Control Class) | UCS0 | SEM-BW | SEM-BW |
66 | Class |
CL_UC_STATUS_TRANSFORMATION Method: COLLECT_MESSAGE
|
Status Management (Transformation Class) | UCS0 | SEM-BW | SEM-BW |
67 | Class |
CL_UC_TASK_EXECUTION Method: IF_UC_TASK_EXECUTION_DTX~DTX_EXECUTE
|
Task Execution | UCS0 | SEM-BW | SEM-BW |
68 | Class |
CL_UC_TASK_FACTORY Method: _TASK_CHECK_TASK_UNIQUE
|
Tasks | UCS0 | SEM-BW | SEM-BW |
69 | Class |
CL_UC_TASK_FACTORY Method: TASK_CHECK_SEQUENCE
|
Tasks | UCS0 | SEM-BW | SEM-BW |
70 | Class |
CL_UC_TASK_FACTORY Method: _TASK_CHECK_PRECEDING_TASK
|
Tasks | UCS0 | SEM-BW | SEM-BW |
71 | Class |
CL_UC_TASK_FACTORY Method: _TASK_TEST_OBLI_SEQ
|
Tasks | UCS0 | SEM-BW | SEM-BW |
72 | Class |
CL_UC_TASK_FACTORY Method: TASK_GET_SEQUENCE
|
Tasks | UCS0 | SEM-BW | SEM-BW |
73 | Class |
CL_UC_TASK_FACTORY Method: _TASK_CHECK_DOCTYPE_UNIQUE
|
Tasks | UCS0 | SEM-BW | SEM-BW |
74 | Class |
CL_UC_TASK_FACTORY Method: _TASK_CHECK_VAL_TASK
|
Tasks | UCS0 | SEM-BW | SEM-BW |
75 | Class |
CL_UC_TX_DATA_CHANGE Method: MESSAGE_APPEND
|
Changes to Transaction Data | UCD0 | SEM-BW | SEM-BW |
76 | Class |
CL_UC_UPL_LOG Method: PREPARE_SUBLIST_DATA
|
Upload Methods: Runtime Aspect | UCF7 | SEM-BW | SEM-BW |
77 | Class | CL_UC_UPL_MESSAGE | C/T: Messages | UCF7 | SEM-BW | SEM-BW |
78 | Class |
CL_UC_UPL_MESSAGE Method: STORE
|
C/T: Messages | UCF7 | SEM-BW | SEM-BW |
79 | Class |
CL_UC_UPL_READER_FILE Method: SET_MESSAGE_FIELDNAME
|
CL_UC_UPL_READER_FILE | UCF7 | SEM-BW | SEM-BW |
80 | Class |
CL_UC_UPL_ROLLUP Method: SET_DATA
|
Derive and Check Upload of Rollup File's Customizing | UCI2 | SEM-BW | SEM-BW |
81 | Class |
CL_UC_UPL_RVISITOR_UNIT Method: IF_UC_UPL_READER_VISITOR~DERIVE_FIELD_VALUE
|
Reader visitor: derive units for keyfigures | UCF7 | SEM-BW | SEM-BW |
82 | Class |
CL_UC_XBRL_MAPPING Method: IF_UC_CUST_DATA_EXT~CHECK
|
Taxonomy Elements - FS Items Mapping | UCRX | SEM-BW | SEM-BW |
83 | Class |
CL_UC_XBRL_MAPPING_GUI Method: GET_GUI_DATA
|
SEM-BCS: XBRL: FS Items Mapping | UCRX | SEM-BW | SEM-BW |
84 | Class |
CL_UG_MD_AREAID Method: IF_UC_CUST_DATA_EXT~CHECK
|
FIN Master Data: Area ID | UGMD1 | FINANCIAL_BASIS | FINBASIS |
85 | Class |
CL_UG_MD_BUPA Method: BUPA_TRANSFORM_BAPI_MSG_TAB
|
FIN Master Data: Business Partner Data | UGMD2 | FINANCIAL_BASIS | FINBASIS |
86 | Class |
CL_UG_MD_FIELDNAME Method: IF_UC_CUST_DATA_EXT~CHECK
|
FIN Master Data: Field Name | UGMD1 | FINANCIAL_BASIS | FINBASIS |
87 | Class |
CL_UPK_APPLICATION_MODEL Method: IF_UC_APPLICATION_MODEL~CONVERT_CHAR_INPUT
|
Connection Allocation SEM-BPS | UPM_DEMO | SEM-BW | SEM-BW |