Table/Structure Field list used by SAP ABAP Program QP_CHA_PAI_FORM (Include CQ_CHA_PAI_FORM: PAI-Coding zur Vermeidung globaler Variablen)
SAP ABAP Program 
QP_CHA_PAI_FORM (Include CQ_CHA_PAI_FORM: PAI-Coding zur Vermeidung globaler Variablen) is using
Message Number (1)| # | Object Type | Object Name | Object Description | Note |
|---|---|---|---|---|
 |
|
|||
| 1 |  Table/Structure Field |
CHA_CLASS_DATA - AENDERGNR | Change Number | |
| 2 | Table/Structure Field |
CHA_CLASS_DATA - CODE9O | Defect Code for Rejection at Upper Specification Limit | |
| 3 | Table/Structure Field |
CHA_CLASS_DATA - CODE9U | Defect Code for Rejection at Lower Specification Limit | |
| 4 | Table/Structure Field |
CHA_CLASS_DATA - CODEGR9O | Defect Code Group for Rejection at Upper Tolerance | |
| 5 | Table/Structure Field |
CHA_CLASS_DATA - CODEGR9U | Defect Code Group for Rejection at Lower Tolerance | |
| 6 | Table/Structure Field |
CHA_CLASS_DATA - CODEVR9O | Version Number | |
| 7 | Table/Structure Field |
CHA_CLASS_DATA - CODEVR9U | Version Number | |
| 8 | Table/Structure Field |
CHA_CLASS_DATA - EEANTVERF | Fraction Calculation | |
| 9 | Table/Structure Field |
CHA_CLASS_DATA - FIXIERT | Default Control Indicators Cannot Be Changed | |
| 10 | Table/Structure Field |
CHA_CLASS_DATA - FORMEL1 | Formula Field | |
| 11 | Table/Structure Field |
CHA_CLASS_DATA - FORMEL2 | Formula Field | |
| 12 | Table/Structure Field |
CHA_CLASS_DATA - FORMELMK | Calculated Characteristic | |
| 13 | Table/Structure Field |
CHA_CLASS_DATA - FORMELSL | Check and Calculate Formula in QM | |
| 14 | Table/Structure Field |
CHA_CLASS_DATA - GUELTIGAB | Valid-From Date | |
| 15 | Table/Structure Field |
CHA_CLASS_DATA - KLASANZAHL | Number of Value Classes for Inspection Results | |
| 16 | Table/Structure Field |
CHA_CLASS_DATA - KLASBREITE | Class Width | |
| 17 | Table/Structure Field |
CHA_CLASS_DATA - KLASBRNI | Value Not Initial if Set | |
| 18 | Table/Structure Field |
CHA_CLASS_DATA - KLASMINI | Value Not Initial if Set | |
| 19 | Table/Structure Field |
CHA_CLASS_DATA - KLASMITTE | Class Midpoint | |
| 20 | Table/Structure Field |
CHA_CLASS_DATA - MASSEINHSW | Unit of Measurement, in Which Quantitative Data Is Stored | |
| 21 | Table/Structure Field |
CHA_CLASS_DATA - PLAUSIOBEN | Upper Plausibility Limit | |
| 22 | Table/Structure Field |
CHA_CLASS_DATA - PLAUSIUNTE | Lower Plausibility Limit | |
| 23 | Table/Structure Field |
CHA_CLASS_DATA - QPMK_REF | Reference to Master Insp. Characteristic in Task List | |
| 24 | Table/Structure Field |
CHA_CLASS_DATA - QUANTITAT | Quantitative Characteristic | |
| 25 | Table/Structure Field |
CHA_CLASS_DATA - RZWANG | Characteristic Category | |
| 26 | Table/Structure Field |
CHA_CLASS_DATA - SOLLWERT | Target Value for a Quantitative Characteristic | |
| 27 | Table/Structure Field |
CHA_CLASS_DATA - SOLLWNI | Value Not Initial if Set | |
| 28 | Table/Structure Field |
CHA_CLASS_DATA - STELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
| 29 | Table/Structure Field |
CHA_CLASS_DATA - TOLERANZOB | Upper Specification Limit | |
| 30 | Table/Structure Field |
CHA_CLASS_DATA - TOLERANZSL | Tolerance Key | |
| 31 | Table/Structure Field |
CHA_CLASS_DATA - TOLERANZUN | Lower Tolerance Limit | |
| 32 | Table/Structure Field |
CHA_CLASS_DATA - TOLEROBEN | Upper Specification Limit | |
| 33 | Table/Structure Field |
CHA_CLASS_DATA - TOLERUNTEN | Lower Specification Limit | |
| 34 | Table/Structure Field |
CHA_CLASS_DATA - TOLERWAB | Date from Which the Tolerance Change Is Valid | |
| 35 | Table/Structure Field |
CHA_CLASS_DATA - TOLERWBIS | Date Until Which the Tolerance Change Is Valid | |
| 36 | Table/Structure Field |
CHA_CLASS_DATA - TOLOBNI | Value Not Initial if Set | |
| 37 | Table/Structure Field |
CHA_CLASS_DATA - TOLUNNI | Value Not Initial if Set | |
| 38 | Table/Structure Field |
CHA_CLASS_DATA - TOLWOBNI | Value Not Initial if Set | |
| 39 | Table/Structure Field |
CHA_CLASS_DATA - TOLWUNNI | Value Not Initial if Set | |
| 40 | Table/Structure Field |
CHA_INFO - FIXIERT | Default Control Indicators Cannot Be Changed | |
| 41 | Table/Structure Field |
CHA_INFO - FORMELMK | Calculated Characteristic | |
| 42 | Table/Structure Field |
CHA_INFO - QUANTITAT | Quantitative Characteristic | |
| 43 | Table/Structure Field |
CHA_INFO - RZWANG | Characteristic Category | |
| 44 | Table/Structure Field |
CHA_INFO - TOLEROBEN | Upper Specification Limit | |
| 45 | Table/Structure Field |
CHA_INFO - TOLERUNTEN | Lower Specification Limit | |
| 46 | Table/Structure Field |
CHA_QUANTITAT - KLASANZAHL | Number of Value Classes for Inspection Results | |
| 47 | Table/Structure Field |
CHA_QUANTITAT - KLASBREITE | Class Width | |
| 48 | Table/Structure Field |
CHA_QUANTITAT - KLASBRNI | Value Not Initial if Set | |
| 49 | Table/Structure Field |
CHA_QUANTITAT - KLASMINI | Value Not Initial if Set | |
| 50 | Table/Structure Field |
CHA_QUANTITAT - KLASMITTE | Class Midpoint | |
| 51 | Table/Structure Field |
CHA_QUANTITAT - PLAUSIOBEN | Upper Plausibility Limit | |
| 52 | Table/Structure Field |
CHA_QUANTITAT - PLAUSIUNTE | Lower Plausibility Limit | |
| 53 | Table/Structure Field |
CHA_QUANTITAT - SOLLWERT | Target Value for a Quantitative Characteristic | |
| 54 | Table/Structure Field |
CHA_QUANTITAT - SOLLWNI | Value Not Initial if Set | |
| 55 | Table/Structure Field |
CHA_QUANTITAT - TOLERANZOB | Upper Specification Limit | |
| 56 | Table/Structure Field |
CHA_QUANTITAT - TOLERANZUN | Lower Tolerance Limit | |
| 57 | Table/Structure Field |
CHA_QUANTITAT - TOLOBNI | Value Not Initial if Set | |
| 58 | Table/Structure Field |
CHA_QUANTITAT - TOLUNNI | Value Not Initial if Set | |
| 59 | Table/Structure Field |
CHA_QUANTITAT - TOLWOBNI | Value Not Initial if Set | |
| 60 | Table/Structure Field |
CHA_QUANTITAT - TOLWUNNI | Value Not Initial if Set | |
| 61 | Table/Structure Field |
PLMK - AENDERGNR | Change Number | |
| 62 | Table/Structure Field |
PLMK - CODE9O | Defect Code for Rejection at Upper Specification Limit | |
| 63 | Table/Structure Field |
PLMK - CODE9U | Defect Code for Rejection at Lower Specification Limit | |
| 64 | Table/Structure Field |
PLMK - CODEGR9O | Defect Code Group for Rejection at Upper Tolerance | |
| 65 | Table/Structure Field |
PLMK - CODEGR9U | Defect Code Group for Rejection at Lower Tolerance | |
| 66 | Table/Structure Field |
PLMK - CODEVR9O | Version Number | |
| 67 | Table/Structure Field |
PLMK - CODEVR9U | Version Number | |
| 68 | Table/Structure Field |
PLMK - EEANTVERF | Fraction Calculation | |
| 69 | Table/Structure Field |
PLMK - FORMEL1 | Formula Field | |
| 70 | Table/Structure Field |
PLMK - FORMEL2 | Formula Field | |
| 71 | Table/Structure Field |
PLMK - FORMELSL | Check and Calculate Formula in QM | |
| 72 | Table/Structure Field |
PLMK - GUELTIGAB | Valid-From Date | |
| 73 | Table/Structure Field |
PLMK - KLASANZAHL | Number of Value Classes for Inspection Results | |
| 74 | Table/Structure Field |
PLMK - KLASBREITE | Class Width | |
| 75 | Table/Structure Field |
PLMK - KLASBRNI | Value Not Initial if Set | |
| 76 | Table/Structure Field |
PLMK - KLASMINI | Value Not Initial if Set | |
| 77 | Table/Structure Field |
PLMK - KLASMITTE | Class Midpoint | |
| 78 | Table/Structure Field |
PLMK - MASSEINHSW | Unit of Measurement, in Which Quantitative Data Is Stored | |
| 79 | Table/Structure Field |
PLMK - PLAUSIOBEN | Upper Plausibility Limit | |
| 80 | Table/Structure Field |
PLMK - PLAUSIUNTE | Lower Plausibility Limit | |
| 81 | Table/Structure Field |
PLMK - QPMK_REF | Reference to Master Insp. Characteristic in Task List | |
| 82 | Table/Structure Field |
PLMK - SOLLWERT | Target Value for a Quantitative Characteristic | |
| 83 | Table/Structure Field |
PLMK - SOLLWNI | Value Not Initial if Set | |
| 84 | Table/Structure Field |
PLMK - STELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
| 85 | Table/Structure Field |
PLMK - TOLERANZOB | Upper Specification Limit | |
| 86 | Table/Structure Field |
PLMK - TOLERANZSL | Tolerance Key | |
| 87 | Table/Structure Field |
PLMK - TOLERANZUN | Lower Tolerance Limit | |
| 88 | Table/Structure Field |
PLMK - TOLERWAB | Date from Which the Tolerance Change Is Valid | |
| 89 | Table/Structure Field |
PLMK - TOLERWBIS | Date Until Which the Tolerance Change Is Valid | |
| 90 | Table/Structure Field |
PLMK - TOLOBNI | Value Not Initial if Set | |
| 91 | Table/Structure Field |
PLMK - TOLUNNI | Value Not Initial if Set | |
| 92 | Table/Structure Field |
PLMK - TOLWOBNI | Value Not Initial if Set | |
| 93 | Table/Structure Field |
PLMK - TOLWUNNI | Value Not Initial if Set | |
| 94 | Table/Structure Field |
QMKST - FIXIERT | Default Control Indicators Cannot Be Changed | |
| 95 | Table/Structure Field |
QMKST - FORMELMK | Calculated Characteristic | |
| 96 | Table/Structure Field |
QMKST - QUANTITAT | Quantitative Characteristic | |
| 97 | Table/Structure Field |
QMKST - RZWANG | Characteristic Category | |
| 98 | Table/Structure Field |
QMKST - TOLEROBEN | Upper Specification Limit | |
| 99 | Table/Structure Field |
QMKST - TOLERUNTEN | Lower Specification Limit | |
| 100 | Table/Structure Field |
QPCD - VERSION | QPCD-VERSION | |
| 101 | Table/Structure Field |
TQ29 - EINHEIT | Unit of Measurement, in Which Quantitative Data Is Stored | |
| 102 | Table/Structure Field |
TQ29 - KZSOLLWERT | Copy Target Value | |
| 103 | Table/Structure Field |
TQ29 - KZTOLREL | Specification Limits Are Relative Values for Target Value | |
| 104 | Table/Structure Field |
TQ29 - SOLLWERT | Target Value for a Quantitative Characteristic | |
| 105 | Table/Structure Field |
TQ29 - SOLLWNI | Value Not Initial if Set | |
| 106 | Table/Structure Field |
TQ29 - STELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
| 107 | Table/Structure Field |
TQ29 - TOLOBNI | Value Not Initial if Set | |
| 108 | Table/Structure Field |
TQ29 - TOLSOLL | Target Value-Dependent Specification Limits | |
| 109 | Table/Structure Field |
TQ29 - TOLUNNI | Value Not Initial if Set |
