Table/Structure Field list used by SAP ABAP Program QP_CHA_CHECK_QUAN (Unterprogramme zur Prüfung von Merkmalen: quantitative Felder)
SAP ABAP Program 
QP_CHA_CHECK_QUAN (Unterprogramme zur Prüfung von Merkmalen: quantitative Felder) is using
Message Number (63)| # | Object Type | Object Name | Object Description | Note |
|---|---|---|---|---|
 |
|
|||
| 1 |  Table/Structure Field |
CHA_CLASS_DATA - AENDERGNR | Change Number | |
| 2 | Table/Structure Field |
CHA_CLASS_DATA - FORMEL1 | Formula Field | |
| 3 | Table/Structure Field |
CHA_CLASS_DATA - FORMEL2 | Formula Field | |
| 4 | Table/Structure Field |
CHA_CLASS_DATA - FORMELSL | Check and Calculate Formula in QM | |
| 5 | Table/Structure Field |
CHA_CLASS_DATA - GRENZEOB1 | First Upper Specification Limit | |
| 6 | Table/Structure Field |
CHA_CLASS_DATA - GRENZEOB2 | Second Upper Specification Limit | |
| 7 | Table/Structure Field |
CHA_CLASS_DATA - GRENZEUN1 | First Lower Specification Limit | |
| 8 | Table/Structure Field |
CHA_CLASS_DATA - GRENZEUN2 | Second Lower Specification Limit | |
| 9 | Table/Structure Field |
CHA_CLASS_DATA - GRENZOB1NI | Value Not Initial if Set | |
| 10 | Table/Structure Field |
CHA_CLASS_DATA - GRENZOB2NI | Value Not Initial if Set | |
| 11 | Table/Structure Field |
CHA_CLASS_DATA - GRENZUN1NI | Value Not Initial if Set | |
| 12 | Table/Structure Field |
CHA_CLASS_DATA - GRENZUN2NI | Value Not Initial if Set | |
| 13 | Table/Structure Field |
CHA_CLASS_DATA - GUELTIGAB | Valid-From Date | |
| 14 | Table/Structure Field |
CHA_CLASS_DATA - INPPROC | Parameters for Input Processing in QM Results Recording | |
| 15 | Table/Structure Field |
CHA_CLASS_DATA - KLASANZAHL | Number of Value Classes for Inspection Results | |
| 16 | Table/Structure Field |
CHA_CLASS_DATA - KLASBREITE | Class Width | |
| 17 | Table/Structure Field |
CHA_CLASS_DATA - KLASBRNI | Value Not Initial if Set | |
| 18 | Table/Structure Field |
CHA_CLASS_DATA - KLASMINI | Value Not Initial if Set | |
| 19 | Table/Structure Field |
CHA_CLASS_DATA - KLASMITTE | Class Midpoint | |
| 20 | Table/Structure Field |
CHA_CLASS_DATA - KZEINSTELL | Characteristic Type | |
| 21 | Table/Structure Field |
CHA_CLASS_DATA - KZUMFS | Multiple Samples | |
| 22 | Table/Structure Field |
CHA_CLASS_DATA - LZEITKZ | Long-Term Inspection | |
| 23 | Table/Structure Field |
CHA_CLASS_DATA - MASSEINHSW | Unit of Measurement, in Which Quantitative Data Is Stored | |
| 24 | Table/Structure Field |
CHA_CLASS_DATA - MERKNR | Inspection Characteristic Number | |
| 25 | Table/Structure Field |
CHA_CLASS_DATA - PLAUSIOBEN | Upper Plausibility Limit | |
| 26 | Table/Structure Field |
CHA_CLASS_DATA - PLAUSIOBNI | Value Not Initial if Set | |
| 27 | Table/Structure Field |
CHA_CLASS_DATA - PLAUSIUNNI | Value Not Initial if Set | |
| 28 | Table/Structure Field |
CHA_CLASS_DATA - PLAUSIUNTE | Lower Plausibility Limit | |
| 29 | Table/Structure Field |
CHA_CLASS_DATA - PLNAL | Group Counter | |
| 30 | Table/Structure Field |
CHA_CLASS_DATA - PLNFL | Sequence | |
| 31 | Table/Structure Field |
CHA_CLASS_DATA - PLNKN | Number of the task list node | |
| 32 | Table/Structure Field |
CHA_CLASS_DATA - PLNNR | Key for Task List Group | |
| 33 | Table/Structure Field |
CHA_CLASS_DATA - PLNTY | Task List Type | |
| 34 | Table/Structure Field |
CHA_CLASS_DATA - QUANTITAT | Quantitative Characteristic | |
| 35 | Table/Structure Field |
CHA_CLASS_DATA - SOLLWERT | Target Value for a Quantitative Characteristic | |
| 36 | Table/Structure Field |
CHA_CLASS_DATA - SOLLWNI | Value Not Initial if Set | |
| 37 | Table/Structure Field |
CHA_CLASS_DATA - STELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
| 38 | Table/Structure Field |
CHA_CLASS_DATA - STEUERKZ | Cntrl Indicator String for Insp. Char./Master Insp. Char. | |
| 39 | Table/Structure Field |
CHA_CLASS_DATA - STICHPRVER | Sampling Procedure in Inspection Characteristic | |
| 40 | Table/Structure Field |
CHA_CLASS_DATA - TOLERANZOB | Upper Specification Limit | |
| 41 | Table/Structure Field |
CHA_CLASS_DATA - TOLERANZSL | Tolerance Key | |
| 42 | Table/Structure Field |
CHA_CLASS_DATA - TOLERANZUN | Lower Tolerance Limit | |
| 43 | Table/Structure Field |
CHA_CLASS_DATA - TOLEROBEN | Upper Specification Limit | |
| 44 | Table/Structure Field |
CHA_CLASS_DATA - TOLERUNTEN | Lower Specification Limit | |
| 45 | Table/Structure Field |
CHA_CLASS_DATA - TOLERWAB | Date from Which the Tolerance Change Is Valid | |
| 46 | Table/Structure Field |
CHA_CLASS_DATA - TOLERWBIS | Date Until Which the Tolerance Change Is Valid | |
| 47 | Table/Structure Field |
CHA_CLASS_DATA - TOLOBNI | Value Not Initial if Set | |
| 48 | Table/Structure Field |
CHA_CLASS_DATA - TOLUNNI | Value Not Initial if Set | |
| 49 | Table/Structure Field |
CHA_CLASS_DATA - TOLWOBNI | Value Not Initial if Set | |
| 50 | Table/Structure Field |
CHA_CLASS_DATA - TOLWUNNI | Value Not Initial if Set | |
| 51 | Table/Structure Field |
CHA_INFO - KZUMFS | Multiple Samples | |
| 52 | Table/Structure Field |
CHA_INFO - LZEITKZ | Long-Term Inspection | |
| 53 | Table/Structure Field |
CHA_INFO - PLNAL | Group Counter | |
| 54 | Table/Structure Field |
CHA_INFO - PLNFL | Sequence | |
| 55 | Table/Structure Field |
CHA_INFO - QUANTITAT | Quantitative Characteristic | |
| 56 | Table/Structure Field |
CHA_INFO - TOLEROBEN | Upper Specification Limit | |
| 57 | Table/Structure Field |
CHA_INFO - TOLERUNTEN | Lower Specification Limit | |
| 58 | Table/Structure Field |
CHA_QUANTITAT - GRENZEOB1 | First Upper Specification Limit | |
| 59 | Table/Structure Field |
CHA_QUANTITAT - GRENZEOB2 | Second Upper Specification Limit | |
| 60 | Table/Structure Field |
CHA_QUANTITAT - GRENZEUN1 | First Lower Specification Limit | |
| 61 | Table/Structure Field |
CHA_QUANTITAT - GRENZEUN2 | Second Lower Specification Limit | |
| 62 | Table/Structure Field |
CHA_QUANTITAT - GRENZOB1NI | Value Not Initial if Set | |
| 63 | Table/Structure Field |
CHA_QUANTITAT - GRENZOB2NI | Value Not Initial if Set | |
| 64 | Table/Structure Field |
CHA_QUANTITAT - GRENZUN1NI | Value Not Initial if Set | |
| 65 | Table/Structure Field |
CHA_QUANTITAT - GRENZUN2NI | Value Not Initial if Set | |
| 66 | Table/Structure Field |
CHA_QUANTITAT - KLASANZAHL | Number of Value Classes for Inspection Results | |
| 67 | Table/Structure Field |
CHA_QUANTITAT - KLASBREITE | Class Width | |
| 68 | Table/Structure Field |
CHA_QUANTITAT - KLASBRNI | Value Not Initial if Set | |
| 69 | Table/Structure Field |
CHA_QUANTITAT - KLASMINI | Value Not Initial if Set | |
| 70 | Table/Structure Field |
CHA_QUANTITAT - KLASMITTE | Class Midpoint | |
| 71 | Table/Structure Field |
CHA_QUANTITAT - PLAUSIOBEN | Upper Plausibility Limit | |
| 72 | Table/Structure Field |
CHA_QUANTITAT - PLAUSIOBNI | Value Not Initial if Set | |
| 73 | Table/Structure Field |
CHA_QUANTITAT - PLAUSIUNNI | Value Not Initial if Set | |
| 74 | Table/Structure Field |
CHA_QUANTITAT - PLAUSIUNTE | Lower Plausibility Limit | |
| 75 | Table/Structure Field |
CHA_QUANTITAT - SOLLWERT | Target Value for a Quantitative Characteristic | |
| 76 | Table/Structure Field |
CHA_QUANTITAT - SOLLWNI | Value Not Initial if Set | |
| 77 | Table/Structure Field |
CHA_QUANTITAT - TOLERANZOB | Upper Specification Limit | |
| 78 | Table/Structure Field |
CHA_QUANTITAT - TOLERANZUN | Lower Tolerance Limit | |
| 79 | Table/Structure Field |
CHA_QUANTITAT - TOLERWEIOB | Change to Upper Specification Limit | |
| 80 | Table/Structure Field |
CHA_QUANTITAT - TOLERWEIUN | Change to Lower Specification Limit | |
| 81 | Table/Structure Field |
CHA_QUANTITAT - TOLOBNI | Value Not Initial if Set | |
| 82 | Table/Structure Field |
CHA_QUANTITAT - TOLUNNI | Value Not Initial if Set | |
| 83 | Table/Structure Field |
CHA_QUANTITAT - TOLWOBNI | Value Not Initial if Set | |
| 84 | Table/Structure Field |
CHA_QUANTITAT - TOLWUNNI | Value Not Initial if Set | |
| 85 | Table/Structure Field |
OPR_HIER - PLNAL | Group Counter | |
| 86 | Table/Structure Field |
OPR_HIER - PLNFL | Sequence | |
| 87 | Table/Structure Field |
PLKO - WERKS | Plant | |
| 88 | Table/Structure Field |
PLMK - AENDERGNR | Change Number | |
| 89 | Table/Structure Field |
PLMK - FORMEL1 | Formula Field | |
| 90 | Table/Structure Field |
PLMK - FORMEL2 | Formula Field | |
| 91 | Table/Structure Field |
PLMK - FORMELSL | Check and Calculate Formula in QM | |
| 92 | Table/Structure Field |
PLMK - GRENZEOB1 | First Upper Specification Limit | |
| 93 | Table/Structure Field |
PLMK - GRENZEOB2 | Second Upper Specification Limit | |
| 94 | Table/Structure Field |
PLMK - GRENZEUN1 | First Lower Specification Limit | |
| 95 | Table/Structure Field |
PLMK - GRENZEUN2 | Second Lower Specification Limit | |
| 96 | Table/Structure Field |
PLMK - GRENZOB1NI | Value Not Initial if Set | |
| 97 | Table/Structure Field |
PLMK - GRENZOB2NI | Value Not Initial if Set | |
| 98 | Table/Structure Field |
PLMK - GRENZUN1NI | Value Not Initial if Set | |
| 99 | Table/Structure Field |
PLMK - GRENZUN2NI | Value Not Initial if Set | |
| 100 | Table/Structure Field |
PLMK - GUELTIGAB | Valid-From Date | |
| 101 | Table/Structure Field |
PLMK - INPPROC | Parameters for Input Processing in QM Results Recording | |
| 102 | Table/Structure Field |
PLMK - KLASANZAHL | Number of Value Classes for Inspection Results | |
| 103 | Table/Structure Field |
PLMK - KLASBREITE | Class Width | |
| 104 | Table/Structure Field |
PLMK - KLASBRNI | Value Not Initial if Set | |
| 105 | Table/Structure Field |
PLMK - KLASMINI | Value Not Initial if Set | |
| 106 | Table/Structure Field |
PLMK - KLASMITTE | Class Midpoint | |
| 107 | Table/Structure Field |
PLMK - KZEINSTELL | Characteristic Type | |
| 108 | Table/Structure Field |
PLMK - MASSEINHSW | Unit of Measurement, in Which Quantitative Data Is Stored | |
| 109 | Table/Structure Field |
PLMK - MERKNR | Inspection Characteristic Number | |
| 110 | Table/Structure Field |
PLMK - PLAUSIOBEN | Upper Plausibility Limit | |
| 111 | Table/Structure Field |
PLMK - PLAUSIOBNI | Value Not Initial if Set | |
| 112 | Table/Structure Field |
PLMK - PLAUSIUNNI | Value Not Initial if Set | |
| 113 | Table/Structure Field |
PLMK - PLAUSIUNTE | Lower Plausibility Limit | |
| 114 | Table/Structure Field |
PLMK - PLNKN | Number of the task list node | |
| 115 | Table/Structure Field |
PLMK - PLNNR | Key for Task List Group | |
| 116 | Table/Structure Field |
PLMK - PLNTY | Task List Type | |
| 117 | Table/Structure Field |
PLMK - SOLLWERT | Target Value for a Quantitative Characteristic | |
| 118 | Table/Structure Field |
PLMK - SOLLWNI | Value Not Initial if Set | |
| 119 | Table/Structure Field |
PLMK - STELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
| 120 | Table/Structure Field |
PLMK - STEUERKZ | Cntrl Indicator String for Insp. Char./Master Insp. Char. | |
| 121 | Table/Structure Field |
PLMK - STICHPRVER | Sampling Procedure in Inspection Characteristic | |
| 122 | Table/Structure Field |
PLMK - TOLERANZOB | Upper Specification Limit | |
| 123 | Table/Structure Field |
PLMK - TOLERANZSL | Tolerance Key | |
| 124 | Table/Structure Field |
PLMK - TOLERANZUN | Lower Tolerance Limit | |
| 125 | Table/Structure Field |
PLMK - TOLERWAB | Date from Which the Tolerance Change Is Valid | |
| 126 | Table/Structure Field |
PLMK - TOLERWBIS | Date Until Which the Tolerance Change Is Valid | |
| 127 | Table/Structure Field |
PLMK - TOLOBNI | Value Not Initial if Set | |
| 128 | Table/Structure Field |
PLMK - TOLUNNI | Value Not Initial if Set | |
| 129 | Table/Structure Field |
PLMK - TOLWOBNI | Value Not Initial if Set | |
| 130 | Table/Structure Field |
PLMK - TOLWUNNI | Value Not Initial if Set | |
| 131 | Table/Structure Field |
QMKST - ESTUKZ | Recording Type | |
| 132 | Table/Structure Field |
QMKST - FORMELMK | Calculated Characteristic | |
| 133 | Table/Structure Field |
QMKST - LZEITKZ | Long-Term Inspection | |
| 134 | Table/Structure Field |
QMKST - MESSWERTE | Measured Values Must Be Recorded | |
| 135 | Table/Structure Field |
QMKST - QUANTITAT | Quantitative Characteristic | |
| 136 | Table/Structure Field |
QMKST - RZWANG | Characteristic Category | |
| 137 | Table/Structure Field |
QMKST - SOLLPRUEF | Check Target Value | |
| 138 | Table/Structure Field |
QMKST - TOLEROBEN | Upper Specification Limit | |
| 139 | Table/Structure Field |
QMKST - TOLERUNTEN | Lower Specification Limit | |
| 140 | Table/Structure Field |
RQPAS - AENNR | Change Number | |
| 141 | Table/Structure Field |
SYST - FDPOS | ABAP System Field: Occurrence in Byte or Character String | |
| 142 | Table/Structure Field |
SYST - STEPL | ABAP System Field: Current Step Loop or Table Control Line | |
| 143 | Table/Structure Field |
TQ29 - EINHEIT | Unit of Measurement, in Which Quantitative Data Is Stored | |
| 144 | Table/Structure Field |
TQ29 - KZSOLLWERT | Copy Target Value | |
| 145 | Table/Structure Field |
TQ29 - KZTOLREL | Specification Limits Are Relative Values for Target Value | |
| 146 | Table/Structure Field |
TQ29 - SOLLWERT | Target Value for a Quantitative Characteristic | |
| 147 | Table/Structure Field |
TQ29 - SOLLWNI | Value Not Initial if Set | |
| 148 | Table/Structure Field |
TQ29 - STELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
| 149 | Table/Structure Field |
TQ29 - TOLERANZOB | Upper Specification Limit | |
| 150 | Table/Structure Field |
TQ29 - TOLERANZSL | Tolerance Key | |
| 151 | Table/Structure Field |
TQ29 - TOLERANZUN | Lower Tolerance Limit | |
| 152 | Table/Structure Field |
TQ29 - TOLOBNI | Value Not Initial if Set | |
| 153 | Table/Structure Field |
TQ29 - TOLSOLL | Target Value-Dependent Specification Limits | |
| 154 | Table/Structure Field |
TQ29 - TOLUNNI | Value Not Initial if Set | |
| 155 | Table/Structure Field |
TQ75 - KZFBS | Indicator in Formula Parameter: Use of Function Module | |
| 156 | Table/Structure Field |
TQ75 - VARKENNG | QM Formula Parameters | |
| 157 | Table/Structure Field |
TQ75F - PROBE | Formula Parameter: Field for Sample Result | |
| 158 | Table/Structure Field |
TQ75F - URWERT | Formula Parameter: Field for Single Value | |
| 159 | Table/Structure Field |
TQSS1 - PLAUSIFAK | Factor (%) with Which the Plausibility Limit Is Calculated | |
| 160 | Table/Structure Field |
TSK_CLASS_DATA - WERKS | Plant |
