Table/Structure Field list used by SAP ABAP Program LQPAAF90 (Forms : S... to Z...)
SAP ABAP Program 
LQPAAF90 (Forms : S... to Z...) is using
-
Class (1)
-
Table/Structure Field (247)
-
Function Module (19)
-
Interface (1)
-
Message Class (2)
-
Message Number (9)
-
Class Method (1)
-
Table (32)
| # | Object Type | Object Name | Object Description | Note |
|---|---|---|---|---|
 |
|
|||
| 1 | Table/Structure Field |
BDCRUN - BDC_AKTIV | ID for active batch input | |
| 2 | Table/Structure Field |
BDCRUN - CDU_AKTIV | ID for active CALL DIALOG USING | |
| 3 | Table/Structure Field |
BDCRUN - CTU_AKTIV | ID for active CALL TRANSACTION USING | |
| 4 | Table/Structure Field |
CHA_CLASS_DATA - SLWBEZ | Identification for the Inspection Point Field Combination | |
| 5 | Table/Structure Field |
CHA_CLASS_DATA - TOLERANZSL | Tolerance Key | |
| 6 | Table/Structure Field |
CHA_FLTP - SOLLWERT | Target Value for a Quantitative Characteristic | |
| 7 | Table/Structure Field |
CHA_FLTP - TOLERANZOB | Upper Specification Limit | |
| 8 | Table/Structure Field |
CHA_FLTP - TOLERANZUN | Lower Specification Limit | |
| 9 | Table/Structure Field |
CHA_INFO - SLWBEZ | Identification for the Inspection Point Field Combination | |
| 10 | Table/Structure Field |
CHA_QUANTITAT - GRENZEOB1 | First Upper Specification Limit | |
| 11 | Table/Structure Field |
CHA_QUANTITAT - GRENZEOB2 | Second Upper Specification Limit | |
| 12 | Table/Structure Field |
CHA_QUANTITAT - GRENZEUN1 | First Lower Specification Limit | |
| 13 | Table/Structure Field |
CHA_QUANTITAT - GRENZEUN2 | Second Lower Specification Limit | |
| 14 | Table/Structure Field |
CHA_QUANTITAT - GRENZOB1NI | Value Not Initial if Set | |
| 15 | Table/Structure Field |
CHA_QUANTITAT - GRENZOB2NI | Value Not Initial if Set | |
| 16 | Table/Structure Field |
CHA_QUANTITAT - GRENZUN1NI | Value Not Initial if Set | |
| 17 | Table/Structure Field |
CHA_QUANTITAT - GRENZUN2NI | Value Not Initial if Set | |
| 18 | Table/Structure Field |
CHA_QUANTITAT - KLASANZAHL | Number of Value Classes for Inspection Results | |
| 19 | Table/Structure Field |
CHA_QUANTITAT - KLASBREITE | Class Width | |
| 20 | Table/Structure Field |
CHA_QUANTITAT - KLASBRNI | Value Not Initial if Set | |
| 21 | Table/Structure Field |
CHA_QUANTITAT - KLASMINI | Value Not Initial if Set | |
| 22 | Table/Structure Field |
CHA_QUANTITAT - KLASMITTE | Class Midpoint | |
| 23 | Table/Structure Field |
CHA_QUANTITAT - PLAUSIOBEN | Upper Plausibility Limit | |
| 24 | Table/Structure Field |
CHA_QUANTITAT - PLAUSIOBNI | Value Not Initial if Set | |
| 25 | Table/Structure Field |
CHA_QUANTITAT - PLAUSIUNNI | Value Not Initial if Set | |
| 26 | Table/Structure Field |
CHA_QUANTITAT - PLAUSIUNTE | Lower Plausibility Limit | |
| 27 | Table/Structure Field |
CHA_QUANTITAT - SOLLWERT | Target Value for a Quantitative Characteristic | |
| 28 | Table/Structure Field |
CHA_QUANTITAT - SOLLWNI | Value Not Initial if Set | |
| 29 | Table/Structure Field |
CHA_QUANTITAT - TOLERANZOB | Upper Specification Limit | |
| 30 | Table/Structure Field |
CHA_QUANTITAT - TOLERANZUN | Lower Tolerance Limit | |
| 31 | Table/Structure Field |
CHA_QUANTITAT - TOLERWEIOB | Change to Upper Specification Limit | |
| 32 | Table/Structure Field |
CHA_QUANTITAT - TOLERWEIUN | Change to Lower Specification Limit | |
| 33 | Table/Structure Field |
CHA_QUANTITAT - TOLOBNI | Value Not Initial if Set | |
| 34 | Table/Structure Field |
CHA_QUANTITAT - TOLUNNI | Value Not Initial if Set | |
| 35 | Table/Structure Field |
CHA_QUANTITAT - TOLWOBNI | Value Not Initial if Set | |
| 36 | Table/Structure Field |
CHA_QUANTITAT - TOLWUNNI | Value Not Initial if Set | |
| 37 | Table/Structure Field |
PLFHD - PSNFH | Item Number for Production Resource/Tool | |
| 38 | Table/Structure Field |
PLKO - PLNNR | Key for Task List Group | |
| 39 | Table/Structure Field |
PLKO - PLNTY | Task List Type | |
| 40 | Table/Structure Field |
PLKO - QDYNHEAD | Level at Which Dynamic Modification Parameters Are Defined | |
| 41 | Table/Structure Field |
PLKO - QDYNSTRING | String for Dynamic Modification Criteria (Database Relevant) | |
| 42 | Table/Structure Field |
PLKO - SLWBEZ | Identification for the Inspection Point Field Combination | |
| 43 | Table/Structure Field |
PLKO - VERWE | Task list usage | |
| 44 | Table/Structure Field |
PLKO - WERKS | Plant | |
| 45 | Table/Structure Field |
PLMK - AUSWMENGE1 | Assigned Code Group or Selected Set | |
| 46 | Table/Structure Field |
PLMK - DYNKRIT | String for Dynamic Modification Criteria (Database Relevant) | |
| 47 | Table/Structure Field |
PLMK - GRENZEOB1 | First Upper Specification Limit | |
| 48 | Table/Structure Field |
PLMK - GRENZEOB2 | Second Upper Specification Limit | |
| 49 | Table/Structure Field |
PLMK - GRENZEUN1 | First Lower Specification Limit | |
| 50 | Table/Structure Field |
PLMK - GRENZEUN2 | Second Lower Specification Limit | |
| 51 | Table/Structure Field |
PLMK - GRENZOB1NI | Value Not Initial if Set | |
| 52 | Table/Structure Field |
PLMK - GRENZOB2NI | Value Not Initial if Set | |
| 53 | Table/Structure Field |
PLMK - GRENZUN1NI | Value Not Initial if Set | |
| 54 | Table/Structure Field |
PLMK - GRENZUN2NI | Value Not Initial if Set | |
| 55 | Table/Structure Field |
PLMK - GUELTIGAB | Valid-From Date | |
| 56 | Table/Structure Field |
PLMK - KLASANZAHL | Number of Value Classes for Inspection Results | |
| 57 | Table/Structure Field |
PLMK - KLASBREITE | Class Width | |
| 58 | Table/Structure Field |
PLMK - KLASBRNI | Value Not Initial if Set | |
| 59 | Table/Structure Field |
PLMK - KLASMINI | Value Not Initial if Set | |
| 60 | Table/Structure Field |
PLMK - KLASMITTE | Class Midpoint | |
| 61 | Table/Structure Field |
PLMK - KURZTEXT | Short Text for Inspection Characteristic | |
| 62 | Table/Structure Field |
PLMK - KZEINSTELL | Characteristic Type | |
| 63 | Table/Structure Field |
PLMK - MASSEINHSW | Unit of Measurement, in Which Quantitative Data Is Stored | |
| 64 | Table/Structure Field |
PLMK - MERKNR | Inspection Characteristic Number | |
| 65 | Table/Structure Field |
PLMK - NO_INSPECTION | Do Not Copy Inspection Characteristic to Inspection Lot | |
| 66 | Table/Structure Field |
PLMK - PLAUSIOBEN | Upper Plausibility Limit | |
| 67 | Table/Structure Field |
PLMK - PLAUSIOBNI | Value Not Initial if Set | |
| 68 | Table/Structure Field |
PLMK - PLAUSIUNNI | Value Not Initial if Set | |
| 69 | Table/Structure Field |
PLMK - PLAUSIUNTE | Lower Plausibility Limit | |
| 70 | Table/Structure Field |
PLMK - QPMK_REF | Reference to Master Insp. Characteristic in Task List | |
| 71 | Table/Structure Field |
PLMK - SOLLWERT | Target Value for a Quantitative Characteristic | |
| 72 | Table/Structure Field |
PLMK - SOLLWNI | Value Not Initial if Set | |
| 73 | Table/Structure Field |
PLMK - SPCKRIT | SPC Criterion | |
| 74 | Table/Structure Field |
PLMK - STELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
| 75 | Table/Structure Field |
PLMK - STEUERKZ | Cntrl Indicator String for Insp. Char./Master Insp. Char. | |
| 76 | Table/Structure Field |
PLMK - STICHPRVER | Sampling Procedure in Inspection Characteristic | |
| 77 | Table/Structure Field |
PLMK - TOLERANZOB | Upper Specification Limit | |
| 78 | Table/Structure Field |
PLMK - TOLERANZSL | Tolerance Key | |
| 79 | Table/Structure Field |
PLMK - TOLERANZUN | Lower Tolerance Limit | |
| 80 | Table/Structure Field |
PLMK - TOLERWAB | Date from Which the Tolerance Change Is Valid | |
| 81 | Table/Structure Field |
PLMK - TOLERWBIS | Date Until Which the Tolerance Change Is Valid | |
| 82 | Table/Structure Field |
PLMK - TOLERWEIOB | Change to Upper Specification Limit | |
| 83 | Table/Structure Field |
PLMK - TOLERWEIUN | Change to Lower Specification Limit | |
| 84 | Table/Structure Field |
PLMK - TOLOBNI | Value Not Initial if Set | |
| 85 | Table/Structure Field |
PLMK - TOLUNNI | Value Not Initial if Set | |
| 86 | Table/Structure Field |
PLMK - TOLWOBNI | Value Not Initial if Set | |
| 87 | Table/Structure Field |
PLMK - TOLWUNNI | Value Not Initial if Set | |
| 88 | Table/Structure Field |
PLMKB - AUSWMENGE1 | Assigned Code Group or Selected Set | |
| 89 | Table/Structure Field |
PLMKB - DYNKRIT | String for Dynamic Modification Criteria (Database Relevant) | |
| 90 | Table/Structure Field |
PLMKB - GRENZEOB1 | First Upper Specification Limit | |
| 91 | Table/Structure Field |
PLMKB - GRENZEOB2 | Second Upper Specification Limit | |
| 92 | Table/Structure Field |
PLMKB - GRENZEUN1 | First Lower Specification Limit | |
| 93 | Table/Structure Field |
PLMKB - GRENZEUN2 | Second Lower Specification Limit | |
| 94 | Table/Structure Field |
PLMKB - GRENZOB1NI | Value Not Initial if Set | |
| 95 | Table/Structure Field |
PLMKB - GRENZOB2NI | Value Not Initial if Set | |
| 96 | Table/Structure Field |
PLMKB - GRENZUN1NI | Value Not Initial if Set | |
| 97 | Table/Structure Field |
PLMKB - GRENZUN2NI | Value Not Initial if Set | |
| 98 | Table/Structure Field |
PLMKB - GUELTIGAB | Valid-From Date | |
| 99 | Table/Structure Field |
PLMKB - KLASANZAHL | Number of Value Classes for Inspection Results | |
| 100 | Table/Structure Field |
PLMKB - KLASBREITE | Class Width | |
| 101 | Table/Structure Field |
PLMKB - KLASBRNI | Value Not Initial if Set | |
| 102 | Table/Structure Field |
PLMKB - KLASMINI | Value Not Initial if Set | |
| 103 | Table/Structure Field |
PLMKB - KLASMITTE | Class Midpoint | |
| 104 | Table/Structure Field |
PLMKB - KURZTEXT | Short Text for Inspection Characteristic | |
| 105 | Table/Structure Field |
PLMKB - KZEINSTELL | Characteristic Type | |
| 106 | Table/Structure Field |
PLMKB - MASSEINHSW | Unit of Measurement, in Which Quantitative Data Is Stored | |
| 107 | Table/Structure Field |
PLMKB - MERKNR | Inspection Characteristic Number | |
| 108 | Table/Structure Field |
PLMKB - NO_INSPECTION | Do Not Copy Inspection Characteristic to Inspection Lot | |
| 109 | Table/Structure Field |
PLMKB - PLAUSIOBEN | Upper Plausibility Limit | |
| 110 | Table/Structure Field |
PLMKB - PLAUSIOBNI | Value Not Initial if Set | |
| 111 | Table/Structure Field |
PLMKB - PLAUSIUNNI | Value Not Initial if Set | |
| 112 | Table/Structure Field |
PLMKB - PLAUSIUNTE | Lower Plausibility Limit | |
| 113 | Table/Structure Field |
PLMKB - QPMK_REF | Reference to Master Insp. Characteristic in Task List | |
| 114 | Table/Structure Field |
PLMKB - SOLLWERT | Target Value for a Quantitative Characteristic | |
| 115 | Table/Structure Field |
PLMKB - SOLLWNI | Value Not Initial if Set | |
| 116 | Table/Structure Field |
PLMKB - SPCKRIT | SPC Criterion | |
| 117 | Table/Structure Field |
PLMKB - STELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
| 118 | Table/Structure Field |
PLMKB - STEUERKZ | Cntrl Indicator String for Insp. Char./Master Insp. Char. | |
| 119 | Table/Structure Field |
PLMKB - STICHPRVER | Sampling Procedure in Inspection Characteristic | |
| 120 | Table/Structure Field |
PLMKB - TOLERANZOB | Upper Specification Limit | |
| 121 | Table/Structure Field |
PLMKB - TOLERANZSL | Tolerance Key | |
| 122 | Table/Structure Field |
PLMKB - TOLERANZUN | Lower Tolerance Limit | |
| 123 | Table/Structure Field |
PLMKB - TOLERWAB | Date from Which the Tolerance Change Is Valid | |
| 124 | Table/Structure Field |
PLMKB - TOLERWBIS | Date Until Which the Tolerance Change Is Valid | |
| 125 | Table/Structure Field |
PLMKB - TOLERWEIOB | Change to Upper Specification Limit | |
| 126 | Table/Structure Field |
PLMKB - TOLERWEIUN | Change to Lower Specification Limit | |
| 127 | Table/Structure Field |
PLMKB - TOLOBNI | Value Not Initial if Set | |
| 128 | Table/Structure Field |
PLMKB - TOLUNNI | Value Not Initial if Set | |
| 129 | Table/Structure Field |
PLMKB - TOLWOBNI | Value Not Initial if Set | |
| 130 | Table/Structure Field |
PLMKB - TOLWUNNI | Value Not Initial if Set | |
| 131 | Table/Structure Field |
PLMKB - VBKZ | Update indicator | |
| 132 | Table/Structure Field |
PLMKB - VSTEUERKZ | Key Containing Preset Characteristic Control Indicators | |
| 133 | Table/Structure Field |
PLMKV - INDEX | Field defined as in SY-TABIX | |
| 134 | Table/Structure Field |
PLMKV - KZEINSTELL | Characteristic Type | |
| 135 | Table/Structure Field |
PLMKV - LOESCHEN | Deletion Indicator | |
| 136 | Table/Structure Field |
PLMKV - MERKNR | Inspection Characteristic Number | |
| 137 | Table/Structure Field |
PLMKV - PLNKN | Number of the task list node | |
| 138 | Table/Structure Field |
PLMW - KZEINSTELL | Characteristic Type | |
| 139 | Table/Structure Field |
PLMW - MERKNR | Inspection Characteristic Number | |
| 140 | Table/Structure Field |
PLMW - PLNKN | Number of the task list node | |
| 141 | Table/Structure Field |
PLMW - ZUORDNR | Number for Dependent Characteristic Specifications | |
| 142 | Table/Structure Field |
PLMWB - KZEINSTELL | Characteristic Type | |
| 143 | Table/Structure Field |
PLMWB - MERKNR | Inspection Characteristic Number | |
| 144 | Table/Structure Field |
PLMWB - PLNKN | Number of the task list node | |
| 145 | Table/Structure Field |
PLMWB - ZUORDNR | Number for Dependent Characteristic Specifications | |
| 146 | Table/Structure Field |
PLMWV - INDEX | Field defined as in SY-TABIX | |
| 147 | Table/Structure Field |
PLMWV - KZEINSTELL | Characteristic Type | |
| 148 | Table/Structure Field |
PLMWV - MERKNR | Inspection Characteristic Number | |
| 149 | Table/Structure Field |
PLMWV - PLNKN | Number of the task list node | |
| 150 | Table/Structure Field |
PLMWV - ZUORDNR | Number for Dependent Characteristic Specifications | |
| 151 | Table/Structure Field |
PLPO - DATUV | Valid-From Date | |
| 152 | Table/Structure Field |
PLPO - PLNNR | Key for Task List Group | |
| 153 | Table/Structure Field |
PLPO - PLNTY | Task List Type | |
| 154 | Table/Structure Field |
PLPO - VPLNR | Group of the referenced task list | |
| 155 | Table/Structure Field |
PLPO - VPLTY | Type of the referenced task list | |
| 156 | Table/Structure Field |
PLPOD - PLNNR | Key for Task List Group | |
| 157 | Table/Structure Field |
PLPOD - PLNTY | Task List Type | |
| 158 | Table/Structure Field |
PLPOD - VPLNR | Group of the referenced task list | |
| 159 | Table/Structure Field |
PLPOD - VPLTY | Type of the referenced task list | |
| 160 | Table/Structure Field |
QFLTP - SOLLWERT | Target Value for a Quantitative Characteristic | |
| 161 | Table/Structure Field |
QFLTP - TOLERANZOB | Upper Specification Limit | |
| 162 | Table/Structure Field |
QFLTP - TOLERANZUN | Lower Specification Limit | |
| 163 | Table/Structure Field |
QM00 - QKZ | X and Blank (Indicator) | |
| 164 | Table/Structure Field |
QMKST - ESTUKZ | Recording Type | |
| 165 | Table/Structure Field |
QMKST - MESSWERTE | Measured Values Must Be Recorded | |
| 166 | Table/Structure Field |
QMKST - PMMZWANG | Assignment of Test Equipment Required | |
| 167 | Table/Structure Field |
QMKST - PRUEFKAT | Reference to Characteristic Attribute Required | |
| 168 | Table/Structure Field |
QMKST - PUMFKZ | Inspection Scope | |
| 169 | Table/Structure Field |
QMKST - QSPCMK | SPC Characteristic | |
| 170 | Table/Structure Field |
QMKST - QUANTITAT | Quantitative Characteristic | |
| 171 | Table/Structure Field |
QMKST - RZWANG | Characteristic Category | |
| 172 | Table/Structure Field |
QMKST - SOLLPRUEF | Check Target Value | |
| 173 | Table/Structure Field |
QMKST - STICHPR | Sampling Procedure is Required | |
| 174 | Table/Structure Field |
QMKST - TOLEROBEN | Upper Specification Limit | |
| 175 | Table/Structure Field |
QMKST - TOLERUNTEN | Lower Specification Limit | |
| 176 | Table/Structure Field |
RC27I - INDEX_PLFL | Index referring to record table for sequences | |
| 177 | Table/Structure Field |
RC27I - INDEX_PLMK | Index referring to record tab. for inspectn. characteristics | |
| 178 | Table/Structure Field |
RC27I - INDEX_PLMW | Index referring to record tab. for insp. charact. values | |
| 179 | Table/Structure Field |
RQMST - TEXT1 | Short Text | |
| 180 | Table/Structure Field |
RQPAS - AB_ZORD | Number for Dependent Characteristic Specifications | |
| 181 | Table/Structure Field |
RQPAS - AENNR | Change Number | |
| 182 | Table/Structure Field |
RQPAS - AGIDV | Application areas | |
| 183 | Table/Structure Field |
RQPAS - AKTYP | Activity category in SAP transaction | |
| 184 | Table/Structure Field |
RQPAS - DATUV | Key Date for Changes to the Plan (Characteristics, etc.) | |
| 185 | Table/Structure Field |
RQPAS - DATUV_MK | Valid-From Date | |
| 186 | Table/Structure Field |
RQPAS - DATUV_VOR | Valid-From Date | |
| 187 | Table/Structure Field |
RQPAS - DYNPROTXT | Screen Header | |
| 188 | Table/Structure Field |
RQPAS - FLG_FEAT | X and Blank (Indicator) | |
| 189 | Table/Structure Field |
RQPAS - FLG_VALUES | X and Blank (Indicator) | |
| 190 | Table/Structure Field |
RQPAS - INKREMENT | Increment for Insp. Characteristic Number in Inspection Plan | |
| 191 | Table/Structure Field |
RQPAS - INKREM_EF | Insert Increment for Characteristic Number in Insp. Plan | |
| 192 | Table/Structure Field |
RQPAS - INKRZO | Increment for Assignment Number in Inspection Plan | |
| 193 | Table/Structure Field |
RQPAS - INKRZO_EF | Insert Increment for Allocation Number in Inspection Plan | |
| 194 | Table/Structure Field |
RQPAS - KOPGR | Screen sequence group in doc. header | |
| 195 | Table/Structure Field |
RQPAS - OK_CODE | Function code | |
| 196 | Table/Structure Field |
RQPAS - POSGR | Group of doc.items for screen sequence | |
| 197 | Table/Structure Field |
RQPAS - QUALITAT | Qualitative Characteristic | |
| 198 | Table/Structure Field |
RQPAS - QUANTITAT | Quantitative Characteristic | |
| 199 | Table/Structure Field |
RQPAS - SERNRKZ | Change History with Serial Number | |
| 200 | Table/Structure Field |
RQPAS - TRTYP | Transaction type | |
| 201 | Table/Structure Field |
SCREEN - GROUP1 | SCREEN-GROUP1 | |
| 202 | Table/Structure Field |
SCREEN - GROUP2 | SCREEN-GROUP2 | |
| 203 | Table/Structure Field |
SCREEN - GROUP4 | SCREEN-GROUP4 | |
| 204 | Table/Structure Field |
SCREEN - INVISIBLE | SCREEN-INVISIBLE | |
| 205 | Table/Structure Field |
SCREEN - NAME | SCREEN-NAME | |
| 206 | Table/Structure Field |
SCXTAB_CONTROL - FIXED_COLS | SCXTAB_CONTROL-FIXED_COLS | |
| 207 | Table/Structure Field |
SYST - BINPT | ABAP System Field: Batch Input Processing Active | |
| 208 | Table/Structure Field |
SYST - DYNNR | ABAP System Field: Current Dynpro Number | |
| 209 | Table/Structure Field |
SYST - LANGU | ABAP System Field: Language Key of Text Environment | |
| 210 | Table/Structure Field |
SYST - STEPL | ABAP System Field: Current Step Loop or Table Control Line | |
| 211 | Table/Structure Field |
SYST - TABIX | ABAP System Field: Row Index of Internal Tables | |
| 212 | Table/Structure Field |
SYST - TFILL | ABAP System Field: Number of Rows in Internal Tables | |
| 213 | Table/Structure Field |
T001W - WERKS | Plant | |
| 214 | Table/Structure Field |
T185 - FCODE | Function code | |
| 215 | Table/Structure Field |
T411 - DYNKRIT | Dynamic Modification Criterion | |
| 216 | Table/Structure Field |
T411 - VERWE | Task list usage | |
| 217 | Table/Structure Field |
TC01 - AKTYP | Activity category in the transaction | |
| 218 | Table/Structure Field |
TCA01 - BLDTY | Screen sequence type for table: T185 Control | |
| 219 | Table/Structure Field |
TCA01 - FLG_FEAT | Indicator: Recipe/proc. instructions active | |
| 220 | Table/Structure Field |
TCA01 - FLG_REF | Indicator: task list can be referenced | |
| 221 | Table/Structure Field |
TCA01 - PLNAW | Application of the task list | |
| 222 | Table/Structure Field |
TCA02 - TXT | Desccription of the task list type | |
| 223 | Table/Structure Field |
TCA09 - LINESIZE | Line Width | |
| 224 | Table/Structure Field |
TCA41 - FLG_ERF_H | Activate/deactivate entry tool | |
| 225 | Table/Structure Field |
TCA41 - PLNAW | Application of the task list | |
| 226 | Table/Structure Field |
TCA41 - QMKDELTA | Increment for Insp. Characteristic Number in Inspection Plan | |
| 227 | Table/Structure Field |
TCA41 - QMKEF | Insert Increment for Characteristic Number in Insp. Plan | |
| 228 | Table/Structure Field |
TCA41 - QMWDELTA | Increment for Assignment Number in Inspection Plan | |
| 229 | Table/Structure Field |
TCA41 - QMWEF | Insert Increment for Allocation Number in Inspection Plan | |
| 230 | Table/Structure Field |
TQ29 - EINHEIT | Unit of Measurement, in Which Quantitative Data Is Stored | |
| 231 | Table/Structure Field |
TQ29 - KZSOLLWERT | Copy Target Value | |
| 232 | Table/Structure Field |
TQ29 - KZTOLREL | Specification Limits Are Relative Values for Target Value | |
| 233 | Table/Structure Field |
TQ29 - SOLLWERT | Target Value for a Quantitative Characteristic | |
| 234 | Table/Structure Field |
TQ29 - SOLLWNI | Value Not Initial if Set | |
| 235 | Table/Structure Field |
TQ29 - STELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
| 236 | Table/Structure Field |
TQ29 - TOLERANZOB | Upper Specification Limit | |
| 237 | Table/Structure Field |
TQ29 - TOLERANZUN | Lower Tolerance Limit | |
| 238 | Table/Structure Field |
TQ29 - TOLOBNI | Value Not Initial if Set | |
| 239 | Table/Structure Field |
TQ29 - TOLSOLL | Target Value-Dependent Specification Limits | |
| 240 | Table/Structure Field |
TQ29 - TOLUNNI | Value Not Initial if Set | |
| 241 | Table/Structure Field |
TQ39A - DYNMERK | Dynamic Modification at Characteristic Level | |
| 242 | Table/Structure Field |
TQSS - UNPLMK | Lower Number for Unplanned Characteristic | |
| 243 | Table/Structure Field |
TQSSW - DYNNR | Screen number | |
| 244 | Table/Structure Field |
TQSSW - WINX1 | X-coordinate 1 (left) of window | |
| 245 | Table/Structure Field |
TQSSW - WINX2 | X-coordinate 2 (right) of window | |
| 246 | Table/Structure Field |
TQSSW - WINY1 | Y-coordinate 1 (above) of window | |
| 247 | Table/Structure Field |
TQSSW - WINY2 | Y-coordinate 2 (below) of window |
