Table/Structure Field list used by SAP ABAP Program LQC02F01 (Subroutines)
SAP ABAP Program
LQC02F01 (Subroutines) is using
# | Object Type | Object Name | Object Description | Note |
---|---|---|---|---|
![]() |
![]() |
|||
1 | ![]() |
CABN - ATINN | Internal characteristic | |
2 | ![]() |
CAWN - ATCOD | Code for value dependency | |
3 | ![]() |
CHVW - BUDAT | Posting Date in the Document | |
4 | ![]() |
CHVW - BWART | Movement type (inventory management) | |
5 | ![]() |
CHVW - MBLNR | Number of Material Document | |
6 | ![]() |
CHVWSHADOW - CHARG | Batch Number | |
7 | ![]() |
CHVWSHADOW - LEVEL | Node level | |
8 | ![]() |
CHVWSHADOW - MATNR | Material Number | |
9 | ![]() |
CHVWSHADOW - STORNO | Checkbox | |
10 | ![]() |
CHVWSHADOW - TYPE | Node type | |
11 | ![]() |
CHVWSHADOW - UMCHA | Receiving/issuing batch | |
12 | ![]() |
CHVWSHADOW - UMMAT | Receiving/issuing material | |
13 | ![]() |
CHVWSHADOW - UMWRK | Receiving plant/issuing plant | |
14 | ![]() |
CHVWSHADOW - WERKS | Plant | |
15 | ![]() |
DD07V - DDTEXT | Short Text for Fixed Values | |
16 | ![]() |
DD07V - DOMVALUE_L | Values for Domains: Single Value / Upper Limit | |
17 | ![]() |
DFCHVW - ALSTF | Expansion Level of Batch Where-Used List | |
18 | ![]() |
DFCHVW - EXPTP | Expansion category f. batch where-used list display | |
19 | ![]() |
DFCHVW - KZSTO | Do Not Explode Stock Transport Order | |
20 | ![]() |
DFCHVW - TRFPO | Expand transfer postings in batch where-used list | |
21 | ![]() |
IFLTP - VALUE | Floating point value | |
22 | ![]() |
MARA - MATNR | Material Number | |
23 | ![]() |
MCH1 - CHARG | Batch Number | |
24 | ![]() |
QAMKR - ANTEIL | Estimated Fraction of Nonconforming Sample Units | |
25 | ![]() |
QAMKR - ANTEILNI | Not Initialized for Fraction | |
26 | ![]() |
QAMKR - ANTEILO | Estimated Fraction Above the Tolerance Range | |
27 | ![]() |
QAMKR - ANTEILONI | Value Not Initial if Set | |
28 | ![]() |
QAMKR - ANTEILU | Estimated Fraction Below the Tolerance Range | |
29 | ![]() |
QAMKR - ANTEILUNI | Value Not Initial if Set | |
30 | ![]() |
QAMKR - ATTRIBUT | Attribute of the Results Record (Valid, Invalid,...) | |
31 | ![]() |
QAMKR - CODE1 | Code | |
32 | ![]() |
QAMKR - DIFF_DEC_PLACES | Different Number of Decimal Places | |
33 | ![]() |
QAMKR - FEHLKLAS | Defect class | |
34 | ![]() |
QAMKR - GRUPPE1 | Code Group | |
35 | ![]() |
QAMKR - IVARIANZ | Internal Dispersion of Valid Measured Values | |
36 | ![]() |
QAMKR - IVARIANZNI | Value Not Initial if Set | |
37 | ![]() |
QAMKR - KATALGART1 | Catalog Type of Assigned Code Group or Selected Set | |
38 | ![]() |
QAMKR - MASSEINHSW | Measurement Unit in Which Quantitative Data Is Maintained | |
39 | ![]() |
QAMKR - MAXWERT | Maximum Value of the Valid Measured Values | |
40 | ![]() |
QAMKR - MAXWERTNI | Value Not Initial if Set | |
41 | ![]() |
QAMKR - MBEWERTG | Inspection Result Valuation | |
42 | ![]() |
QAMKR - MERKNR | Inspection Characteristic Number | |
43 | ![]() |
QAMKR - MINWERT | Minimum Value of the Valid Measured Values | |
44 | ![]() |
QAMKR - MINWERTNI | Value Not Initial if Set | |
45 | ![]() |
QAMKR - MITTELWERT | Arithmetic Mean of Valid Measured Values | |
46 | ![]() |
QAMKR - MITTELWNI | Value Not Initial if Set | |
47 | ![]() |
QAMKR - MKVERSION | Version Number of the Master Inspection Characteristic | |
48 | ![]() |
QAMKR - MOMENT3 | Third Central Moment of Valid Measured Values | |
49 | ![]() |
QAMKR - MOMENT3NI | Value Not Initial if Set | |
50 | ![]() |
QAMKR - MOMENT4 | Fourth Central Moment of Valid Measured Values | |
51 | ![]() |
QAMKR - MOMENT4NI | Value Not Initial if Set | |
52 | ![]() |
QAMKR - POSITION | Test Position | |
53 | ![]() |
QAMKR - PROBENR | Sample Number (Based on an Inspection Point) | |
54 | ![]() |
QAMKR - PRUEFLOS | Inspection Lot Number | |
55 | ![]() |
QAMKR - QERGDATH | Origin of Results Data | |
56 | ![]() |
QAMKR - QPMK_WERKS | Plant for the Master Inspection Characteristic | |
57 | ![]() |
QAMKR - SPANNWEINI | Value Not Initial if Set | |
58 | ![]() |
QAMKR - SPANNWEITE | Range of Valid Measured Values | |
59 | ![]() |
QAMKR - STATUSR | Results Record Status | |
60 | ![]() |
QAMKR - STDABW | Standard Deviation of Valid Measured Values | |
61 | ![]() |
QAMKR - STDABWNI | Value Not Initial if Set | |
62 | ![]() |
QAMKR - STELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
63 | ![]() |
QAMKR - STEUERKZ | Cntrl Indicator String for Insp. Char./Master Insp. Char. | |
64 | ![]() |
QAMKR - TOLOBNI | Value Not Initial if Set | |
65 | ![]() |
QAMKR - TOLUNNI | Value Not Initial if Set | |
66 | ![]() |
QAMKR - VARIANZ | Dispersion (Variance) of Valid Measured Values | |
67 | ![]() |
QAMKR - VARIANZNI | Value Not Initial if Set | |
68 | ![]() |
QAMKR - VERWMERKM | Master Inspection Characteristics | |
69 | ![]() |
QAMKR - VORGLFNR | Current Node Number from Order Counter APLZL | |
70 | ![]() |
QAMR - ATTRIBUT | Attribute of the Results Record (Valid, Invalid,...) | |
71 | ![]() |
QAMR - MBEWERTG | Inspection Result Valuation | |
72 | ![]() |
QAMR - MITTELWERT | Arithmetic Mean of Valid Measured Values | |
73 | ![]() |
QAMR - MITTELWNI | Value Not Initial if Set | |
74 | ![]() |
QAMV - MASSEINHSW | Unit of Measurement, in Which Quantitative Data Is Stored | |
75 | ![]() |
QAPP - PROBENR | Sample Number (Based on an Inspection Point) | |
76 | ![]() |
QAPP - VORGLFNR | Current Node Number from Order Counter APLZL | |
77 | ![]() |
QAQEE - MITTELWERT | Arithmetic Mean of Valid Measured Values | |
78 | ![]() |
QASER - ATTRIBUT | Attribute of the Results Record (Valid, Invalid,...) | |
79 | ![]() |
QASER - MERKNR | Inspection Characteristic Number | |
80 | ![]() |
QASER - MESSWERT | Measured Value for a Sample Unit | |
81 | ![]() |
QASER - MESSWERTNI | Measured Value is Not Initial | |
82 | ![]() |
QASER - PROBENR | Sample Number | |
83 | ![]() |
QASER - VORGLFNR | Current Node Number from Order Counter APLZL | |
84 | ![]() |
QASPR - MERKNR | Inspection Characteristic Number | |
85 | ![]() |
QASPR - PROBENR | Sample Number | |
86 | ![]() |
QASPR - VORGLFNR | Current Node Number from Order Counter APLZL | |
87 | ![]() |
QCDOCINFO - ALSTF | Expansion Level of Batch Where-Used List | |
88 | ![]() |
QCDOCINFO - CHARG | Batch Number | |
89 | ![]() |
QCDOCINFO - MATNR | Material Number | |
90 | ![]() |
QCDOCINFO - WERKS | Plant | |
91 | ![]() |
QCDOCINFO - WITHTRANSF | Stock Transfers from Batch Where-Used List | |
92 | ![]() |
QCRES - ANTEIL | Estimated Fraction of Nonconforming Units | |
93 | ![]() |
QCRES - ANTEILO | Estimated Fraction Above the Tolerance Range | |
94 | ![]() |
QCRES - ANTEILU | Estimated Fraction Below the Tolerance Range | |
95 | ![]() |
QCRES - ATTRTEXT | Explanatory short text | |
96 | ![]() |
QCRES - CODEKTXT1 | Short Text for Code | |
97 | ![]() |
QCRES - ERDATHETXT | Short Text | |
98 | ![]() |
QCRES - FEHLKLTEXT | Short Text | |
99 | ![]() |
QCRES - GRPTXT1 | Short Text for Code Group | |
100 | ![]() |
QCRES - INSP_POSITION | Test Position | |
101 | ![]() |
QCRES - IVARIANZ | Internal Dispersion of Valid Measured Values | |
102 | ![]() |
QCRES - KZSPEC | Relationship of Value to Specifications | |
103 | ![]() |
QCRES - LEVEL_RESULT | Level for Result Selection | |
104 | ![]() |
QCRES - MASSEINHSW | Unit of Measurement | |
105 | ![]() |
QCRES - MAXWERT | Maximum Value of the Valid Measured Values | |
106 | ![]() |
QCRES - MBEWTEXT | Explanatory short text | |
107 | ![]() |
QCRES - MINWERT | Minimum Value of the Valid Measured Values | |
108 | ![]() |
QCRES - MITTELWERT | Arithmetic Mean of Valid Measured Values | |
109 | ![]() |
QCRES - MKMNR | Master Inspection Characteristics | |
110 | ![]() |
QCRES - MOMENT3 | Third Central Moment of Valid Measured Values | |
111 | ![]() |
QCRES - MOMENT4 | Fourth Central Moment of Valid Measured Values | |
112 | ![]() |
QCRES - MVALUE | Certificates: Output Field for Mean Value | |
113 | ![]() |
QCRES - SPANNWEITE | Range of Valid Measured Values | |
114 | ![]() |
QCRES - STATUSTEXT | Short Text | |
115 | ![]() |
QCRES - STDABW | Standard Deviation of Valid Measured Values | |
116 | ![]() |
QCRES - VARIANZ | Dispersion (Variance) of Valid Measured Values | |
117 | ![]() |
QCRES - VERSION | Version Number of the Master Inspection Characteristic | |
118 | ![]() |
QCRES - WERKS | Plant | |
119 | ![]() |
QCRES_MV - ATTRIBUTE_QDI | Attribute for Results Record (Greater, Smaller,..) | |
120 | ![]() |
QCRES_MV - MVALUE | Certificates: Output Field for Mean Value | |
121 | ![]() |
QCRES_MV - VALUE1_QDI | Value or Part of Value Range on Certificate | |
122 | ![]() |
QCRES_MV - VALUE2_QDI | Value or Part of Value Range on Certificate | |
123 | ![]() |
QCSPEC - ATCOD | Code for value dependency | |
124 | ![]() |
QCSPEC - TOLERANZOB | Upper Specification Limit | |
125 | ![]() |
QCSPEC - TOLERANZUN | Lower Specification Limit | |
126 | ![]() |
QCSPEC - TOLOBFLOAT | Upper Specification Limit | |
127 | ![]() |
QCSPEC - TOLUNFLOAT | Lower Tolerance Limit | |
128 | ![]() |
QCVM - AUSGLEN | Output Length | |
129 | ![]() |
QCVM - CTYP | Certificate Type | |
130 | ![]() |
QCVM - KZAUSGFMT | Characteristic Output Format | |
131 | ![]() |
QCVM - KZESEL | Level for Result Selection | |
132 | ![]() |
QCVM - KZEXPDS | Indicator: Exponential Notation | |
133 | ![]() |
QCVM - KZHERKVG | Origin of Inspection Specifications | |
134 | ![]() |
QCVM - KZHERKWERT | Origin of the Characteristic Result on the Certificate | |
135 | ![]() |
QCVM - MASSEINHSW | Unit of Measurement, in Which Quantitative Data Is Stored | |
136 | ![]() |
QCVM - MKMNR | Master Inspection Characteristics | |
137 | ![]() |
QCVM - STELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
138 | ![]() |
QCVM - VERSION | Version Number of Certificate Profile | |
139 | ![]() |
QCVM - VERSIONMK | Version Number of the Master Inspection Characteristic | |
140 | ![]() |
QCVM - VORLNR | Certificate Profile Number | |
141 | ![]() |
QCVM - ZAEHLER | Plant | |
142 | ![]() |
QCVME - ATNAM | Characteristic Name | |
143 | ![]() |
QCVME - AUSGLEN | Output Length | |
144 | ![]() |
QCVME - CTYP | Certificate Type | |
145 | ![]() |
QCVME - IPMEDIUM | Mean Value / Original Values from All Inspection Points | |
146 | ![]() |
QCVME - KZAUSGFMT | Characteristic Output Format | |
147 | ![]() |
QCVME - KZESEL | Level for Result Selection | |
148 | ![]() |
QCVME - KZEXPDS | Indicator: Exponential Notation | |
149 | ![]() |
QCVME - KZHERKVG | Origin of Inspection Specifications | |
150 | ![]() |
QCVME - KZHERKWERT | Origin of the Characteristic Result on the Certificate | |
151 | ![]() |
QCVME - MASSEINHSW | Unit of Measurement, in Which Quantitative Data Is Stored | |
152 | ![]() |
QCVME - MKMNR | Master Inspection Characteristics | |
153 | ![]() |
QCVME - STELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
154 | ![]() |
QCVME - VERSION | Version Number of Certificate Profile | |
155 | ![]() |
QCVME - VERSIONMK | Version Number of the Master Inspection Characteristic | |
156 | ![]() |
QCVME - VORLNR | Certificate Profile Number | |
157 | ![]() |
QCVME - ZAEHLER | Plant | |
158 | ![]() |
QCVMEA - VERSIONMK | Version Number of the Master Inspection Characteristic | |
159 | ![]() |
QM00 - QKZ | X and Blank (Indicator) | |
160 | ![]() |
QMKST - PRUEFKAT | Reference to Characteristic Attribute Required | |
161 | ![]() |
QMKST - QUANTITAT | Quantitative Characteristic | |
162 | ![]() |
QPMK - ATINN | Internal characteristic | |
163 | ![]() |
QPMK - MASSEINHSW | Unit of Measurement, in Which Quantitative Data Is Stored | |
164 | ![]() |
QPMK - MKMNR | Master Inspection Characteristics | |
165 | ![]() |
QPMK - VERSION | Version Number of the Master Inspection Characteristic | |
166 | ![]() |
QPMK - ZAEHLER | Plant for the Master Inspection Characteristic | |
167 | ![]() |
SYST - LANGU | ABAP System Field: Language Key of Text Environment | |
168 | ![]() |
SYST - MSGID | ABAP System Field: Message ID | |
169 | ![]() |
SYST - MSGNO | ABAP System Field: Message Number | |
170 | ![]() |
SYST - MSGTY | ABAP System Field: Message Type | |
171 | ![]() |
SYST - MSGV1 | ABAP System Field: Message Variable | |
172 | ![]() |
SYST - MSGV2 | ABAP System Field: Message Variable | |
173 | ![]() |
SYST - MSGV3 | ABAP System Field: Message Variable | |
174 | ![]() |
SYST - MSGV4 | ABAP System Field: Message Variable | |
175 | ![]() |
SYST - TABIX | ABAP System Field: Row Index of Internal Tables | |
176 | ![]() |
SYST - TFILL | ABAP System Field: Number of Rows in Internal Tables | |
177 | ![]() |
T001W - WERKS | Plant | |
178 | ![]() |
T006 - MSEHI | Unit of Measurement | |
179 | ![]() |
TQ16T - BEWERTUNG | Code Valuation | |
180 | ![]() |
TQ16T - KURZTEXT | Short Text | |
181 | ![]() |
TQ16T - SPRACHE | Language Key | |
182 | ![]() |
TQ65 - SAMESOURCE | Certificates: Specifications and Values from Same Source | |
183 | ![]() |
TQ73 - QERGDATH | Origin of Results Data | |
184 | ![]() |
TQ73T - ERDATHETXT | Short Text | |
185 | ![]() |
TQ73T - QERGDATH | Origin of Results Data | |
186 | ![]() |
TQ73T - SPRSL | Language Key | |
187 | ![]() |
TQ77 - ATTRIBUT | Attribute of the Results Record (Valid, Invalid,...) | |
188 | ![]() |
TQ77T - ATTRIBUT | Attribute of the Results Record (Valid, Invalid,...) | |
189 | ![]() |
TQ77T - KURZTEXT | Short Text | |
190 | ![]() |
TQ77T - SPRACHE | Language Key |