Table/Structure Field list used by SAP ABAP Program LE30BF09 (forms for open meter (create ZW))
SAP ABAP Program
LE30BF09 (forms for open meter (create ZW)) is using
| # | Object Type | Object Name | Object Description | Note |
|---|---|---|---|---|
| 1 | EADZ - BIS | Date at Which a Time Slice Expires | ||
| 2 | EADZ - FESTTEMP | Fixed temperature | ||
| 3 | EADZ - GASFACTOR | Conversion factor for gas | ||
| 4 | EADZ - LOGIKZW | Logical register number | ||
| 5 | EADZ - PROFEST | Consumption fixed value to be weighted linearly | ||
| 6 | EADZ - PROPROZ | Consumption percentage for weighting | ||
| 7 | EADZ - THGVER | Gas procedure | ||
| 8 | EADZ - ZEITRAUM | Validity period | ||
| 9 | EMSG_GEN - MSGTY | Message type | ||
| 10 | EMSG_MSG - KZ_BREAK | Indicator: Breakpoint | ||
| 11 | EMSG_MSG - KZ_EXC | Indicator: Output EXCEPTION | ||
| 12 | EMSG_MSG - KZ_MSG | Indicator: Output message | ||
| 13 | EMSG_MSG - MSGID | Message Class | ||
| 14 | EMSG_MSG - MSGNO | Message Number | ||
| 15 | EMSG_MSG - MSGTY | Message Type | ||
| 16 | ETDZ - ANZERG | Number of meter reading results per meter reading | ||
| 17 | ETDZ - BIS | Date at Which a Time Slice Expires | ||
| 18 | ETDZ - BLIWIRK | Reactive, apparent, or active registers | ||
| 19 | ETDZ - CALOR_AREA | Calorific value district | ||
| 20 | ETDZ - CRGPRESS | Gas correction pressure | ||
| 21 | ETDZ - EQUNR | Equipment Number | ||
| 22 | ETDZ - GAS_PRS_AR | Gas Pressure Area | ||
| 23 | ETDZ - GEWKEY | Weighting key | ||
| 24 | ETDZ - HOEKORR | Altitude correction pressure | ||
| 25 | ETDZ - INTSIZEID | Interval Length ID | ||
| 26 | ETDZ - KENNZIFF | Code for Identifying a Register | ||
| 27 | ETDZ - KZAHLE | Gas law deviation factor (set) | ||
| 28 | ETDZ - KZAHLT | Actual gas law deviation factor | ||
| 29 | ETDZ - KZMESSW | Nonmetering register | ||
| 30 | ETDZ - LOGIKZW | Logical register number | ||
| 31 | ETDZ - MASSBILL | Unit of measurement for billing | ||
| 32 | ETDZ - MASSREAD | Unit of measurement for meter reading | ||
| 33 | ETDZ - NABLESEN | Do Not Read Register | ||
| 34 | ETDZ - PRUEFKL | Validation class for independent validations | ||
| 35 | ETDZ - PR_AREA_AI | Air pressure area | ||
| 36 | ETDZ - SPARTYP | Division category | ||
| 37 | ETDZ - STANZNAC | Places after the decimal in a register | ||
| 38 | ETDZ - STANZVOR | Places before the decimal point in a register | ||
| 39 | ETDZ - STEUERGRP | Control group for multiple meter reading order creation | ||
| 40 | ETDZ - TEMP_AREA | Temperature area | ||
| 41 | ETDZ - THGBER | Inclusion of factors in thermal gas billing | ||
| 42 | ETDZ - TOUPERIOD | Time-of-use type | ||
| 43 | ETDZ - UEBERVER | Transformation ratio | ||
| 44 | ETDZ - ZSPANNP | Register factor: primary transformer voltage | ||
| 45 | ETDZ - ZSPANNS | Register factor: secondary transformer voltage | ||
| 46 | ETDZ - ZSTROMP | Register factor: primary transformer current | ||
| 47 | ETDZ - ZSTROMS | Register factor: secondary transformer current | ||
| 48 | ETDZ - ZWART | Register type | ||
| 49 | ETDZ - ZWFAKT | Register factor | ||
| 50 | ETDZ - ZWKENN | Register identification | ||
| 51 | ETDZ - ZWNUMMER | Register | ||
| 52 | ETDZ - ZWTYP | Register category | ||
| 53 | ETDZ_LOC - CALOR_AREA | Calorific value district | ||
| 54 | ETDZ_LOC - CRGPRESS | Gas correction pressure | ||
| 55 | ETDZ_LOC - GAS_PRS_AR | Gas Pressure Area | ||
| 56 | ETDZ_LOC - HOEKORR | Altitude correction pressure | ||
| 57 | ETDZ_LOC - KZAHLE | Gas law deviation factor (set) | ||
| 58 | ETDZ_LOC - KZAHLT | Actual gas law deviation factor | ||
| 59 | ETDZ_LOC - PR_AREA_AI | Air pressure area | ||
| 60 | ETDZ_LOC - TEMP_AREA | Temperature area | ||
| 61 | ETDZ_LOC - THGBER | Inclusion of factors in thermal gas billing | ||
| 62 | ETYP - PREISKLA | Price Class | ||
| 63 | EZWG - KZDEFAULT | Propose register during installation/replacement | ||
| 64 | EZWG - UEBERVER | Transformation ratio | ||
| 65 | EZWG - ZWNABR | Register not relevant to billing | ||
| 66 | EZWG - ZWNUMMER | Register | ||
| 67 | EZWG - ZWTYP | Register category | ||
| 68 | ISU07_EGER - BIS | Date at Which a Time Slice Expires | ||
| 69 | ISU07_EGER - EQUNR | Equipment Number | ||
| 70 | ISU07_EGER - GERAET | Serial Number | ||
| 71 | ISU07_EGER - MATNR | Material Number | ||
| 72 | ISU07_EGER - ZWGRUPPE | Register Group | ||
| 73 | ISU07_INSTALL_STRUC - IEADZ | ISU07_INSTALL_STRUC-IEADZ | ||
| 74 | ISU07_ZW - ANZERG | Number of meter reading results per meter reading | ||
| 75 | ISU07_ZW - ANZERGO | Number of meter reading results per meter reading | ||
| 76 | ISU07_ZW - BLIWIRKA | Reactive, apparent, or active registers | ||
| 77 | ISU07_ZW - BLIWIRKE | Reactive, apparent, or active registers | ||
| 78 | ISU07_ZW - CALOR_AREA | Calorific value district | ||
| 79 | ISU07_ZW - CALOR_AREO | Calorific value district | ||
| 80 | ISU07_ZW - CRGPRESS | Gas correction pressure | ||
| 81 | ISU07_ZW - CRGPRESSA | Gas correction pressure | ||
| 82 | ISU07_ZW - EQUNRA | Equipment Number | ||
| 83 | ISU07_ZW - EQUNRE | Equipment Number | ||
| 84 | ISU07_ZW - ERFASSNACE | Starting Point for Rounding | ||
| 85 | ISU07_ZW - FESTTEMP | Fixed temperature | ||
| 86 | ISU07_ZW - FIRST_ALLOC | Indicators | ||
| 87 | ISU07_ZW - GAS_PRS_AR | Gas Pressure Area | ||
| 88 | ISU07_ZW - GAS_PRS_ARA | Gas Pressure Area | ||
| 89 | ISU07_ZW - GERAETA | Serial Number | ||
| 90 | ISU07_ZW - GERAETE | Serial Number | ||
| 91 | ISU07_ZW - GEWKEYA | Weighting key | ||
| 92 | ISU07_ZW - GEWKEYE | Weighting key | ||
| 93 | ISU07_ZW - HOEKORR | Altitude correction pressure | ||
| 94 | ISU07_ZW - HOEKORRO | Altitude correction pressure | ||
| 95 | ISU07_ZW - INTSIZEIDA | Interval Length ID | ||
| 96 | ISU07_ZW - INTSIZEIDE | Interval Length ID | ||
| 97 | ISU07_ZW - KENNZIFFA | Code for Identifying a Register | ||
| 98 | ISU07_ZW - KENNZIFFE | Code for Identifying a Register | ||
| 99 | ISU07_ZW - KZAHLE | Gas law deviation factor (set) | ||
| 100 | ISU07_ZW - KZAHLEA | Gas law deviation factor (set) | ||
| 101 | ISU07_ZW - KZAHLT | Actual gas law deviation factor | ||
| 102 | ISU07_ZW - KZAHLTA | Actual gas law deviation factor | ||
| 103 | ISU07_ZW - KZMESSWE | Nonmetering register | ||
| 104 | ISU07_ZW - LOGIKZWA | Logical register number | ||
| 105 | ISU07_ZW - LOGIKZWE | Logical register number | ||
| 106 | ISU07_ZW - MASSBILLA | Unit of measurement for billing | ||
| 107 | ISU07_ZW - MASSBILLE | Unit of measurement for billing | ||
| 108 | ISU07_ZW - MASSREADA | Unit of measurement for meter reading | ||
| 109 | ISU07_ZW - MASSREADE | Unit of measurement for meter reading | ||
| 110 | ISU07_ZW - MATNRA | Material Number | ||
| 111 | ISU07_ZW - MATNRE | Material Number | ||
| 112 | ISU07_ZW - MEINS | Unit of measurement for meter reading | ||
| 113 | ISU07_ZW - NABLESENA | Do Not Read Register | ||
| 114 | ISU07_ZW - NABLESENE | Do Not Read Register | ||
| 115 | ISU07_ZW - PREISKLAE | Price Class | ||
| 116 | ISU07_ZW - PROFESTE | Consumption fixed value to be weighted linearly | ||
| 117 | ISU07_ZW - PROPROZE | Consumption percentage for weighting | ||
| 118 | ISU07_ZW - PRUEFKLA | Validation class for independent validations | ||
| 119 | ISU07_ZW - PRUEFKLE | Validation class for independent validations | ||
| 120 | ISU07_ZW - PR_AREA_AI | Air pressure area | ||
| 121 | ISU07_ZW - PR_AREA_AO | Air pressure area | ||
| 122 | ISU07_ZW - SPARTYPA | Division category | ||
| 123 | ISU07_ZW - SPARTYPE | Division category | ||
| 124 | ISU07_ZW - STANZNACE | Places after the decimal in a register | ||
| 125 | ISU07_ZW - STANZVORE | Places before the decimal point in a register | ||
| 126 | ISU07_ZW - STEUERGRPA | Control group for multiple meter reading order creation | ||
| 127 | ISU07_ZW - STEUERGRPE | Control group for multiple meter reading order creation | ||
| 128 | ISU07_ZW - TEMP_AREA | Temperature area | ||
| 129 | ISU07_ZW - TEMP_AREAO | Temperature area | ||
| 130 | ISU07_ZW - THGBERA | Inclusion of factors in thermal gas billing | ||
| 131 | ISU07_ZW - THGBERE | Inclusion of factors in thermal gas billing | ||
| 132 | ISU07_ZW - THGVER | Gas procedure | ||
| 133 | ISU07_ZW - TOUPERIODA | Time-of-use type | ||
| 134 | ISU07_ZW - TOUPERIODE | Time-of-use type | ||
| 135 | ISU07_ZW - UEBERVERA | Transformation ratio | ||
| 136 | ISU07_ZW - ZEITRAUME | Validity period | ||
| 137 | ISU07_ZW - ZSPANNPE | Register factor: primary transformer voltage | ||
| 138 | ISU07_ZW - ZSPANNSE | Register factor: secondary transformer voltage | ||
| 139 | ISU07_ZW - ZSTROMPE | Register factor: primary transformer current | ||
| 140 | ISU07_ZW - ZSTROMSE | Register factor: secondary transformer current | ||
| 141 | ISU07_ZW - ZUSZAHLZWE | Volume correction factor | ||
| 142 | ISU07_ZW - ZWARTA | Register type | ||
| 143 | ISU07_ZW - ZWARTE | Register type | ||
| 144 | ISU07_ZW - ZWFAKTE | Register factor | ||
| 145 | ISU07_ZW - ZWKENNA | Register identification | ||
| 146 | ISU07_ZW - ZWKENNE | Register identification | ||
| 147 | ISU07_ZW - ZWNABR | Register not relevant to billing | ||
| 148 | ISU07_ZW - ZWNUMMERA | Register | ||
| 149 | ISU07_ZW - ZWNUMMERE | Register | ||
| 150 | ISU07_ZW - ZWTYPA | Register category | ||
| 151 | ISU07_ZW - ZWTYPE | Register category | ||
| 152 | ISU_TIMESL - AB | Date from which time slice is valid | ||
| 153 | ISU_ZWFAKT - ZSPANNP | Register factor: primary transformer voltage | ||
| 154 | ISU_ZWFAKT - ZSPANNS | Register factor: secondary transformer voltage | ||
| 155 | ISU_ZWFAKT - ZSTROMP | Register factor: primary transformer current | ||
| 156 | ISU_ZWFAKT - ZSTROMS | Register factor: secondary transformer current | ||
| 157 | REG30 - EADAT | Activity Date | ||
| 158 | REG30_D - EADAT | Activity Date | ||
| 159 | REG30_GERA - ACTION | Action in the work list for installation, etc. (IS-U) | ||
| 160 | REG30_ZW - ANZERG | Number of meter reading results per meter reading | ||
| 161 | REG30_ZW - ANZERGO | Number of meter reading results per meter reading | ||
| 162 | REG30_ZW - BLIWIRKA | Reactive, apparent, or active registers | ||
| 163 | REG30_ZW - BLIWIRKE | Reactive, apparent, or active registers | ||
| 164 | REG30_ZW - CALOR_AREA | Calorific value district | ||
| 165 | REG30_ZW - CALOR_AREO | Calorific value district | ||
| 166 | REG30_ZW - CRGPRESS | Gas correction pressure | ||
| 167 | REG30_ZW - CRGPRESSA | Gas correction pressure | ||
| 168 | REG30_ZW - FESTTEMP | Fixed temperature | ||
| 169 | REG30_ZW - GAS_PRS_AR | Gas Pressure Area | ||
| 170 | REG30_ZW - GAS_PRS_ARA | Gas Pressure Area | ||
| 171 | REG30_ZW - GEWKEYE | Weighting key | ||
| 172 | REG30_ZW - HOEKORR | Altitude correction pressure | ||
| 173 | REG30_ZW - HOEKORRO | Altitude correction pressure | ||
| 174 | REG30_ZW - INTSIZEIDE | Interval Length ID | ||
| 175 | REG30_ZW - KENNZIFFA | Code for Identifying a Register | ||
| 176 | REG30_ZW - KENNZIFFE | Code for Identifying a Register | ||
| 177 | REG30_ZW - KZAHLE | Gas law deviation factor (set) | ||
| 178 | REG30_ZW - KZAHLEA | Gas law deviation factor (set) | ||
| 179 | REG30_ZW - KZAHLT | Actual gas law deviation factor | ||
| 180 | REG30_ZW - KZAHLTA | Actual gas law deviation factor | ||
| 181 | REG30_ZW - KZMESSWE | Nonmetering register | ||
| 182 | REG30_ZW - MASSBILLE | Unit of measurement for billing | ||
| 183 | REG30_ZW - MASSREADE | Unit of measurement for meter reading | ||
| 184 | REG30_ZW - MEINS | Unit of measurement for meter reading | ||
| 185 | REG30_ZW - NABLESENE | Do Not Read Register | ||
| 186 | REG30_ZW - PREISKLAE | Price Class | ||
| 187 | REG30_ZW - PROFESTE | Consumption fixed value to be weighted linearly | ||
| 188 | REG30_ZW - PROPROZE | Consumption percentage for weighting | ||
| 189 | REG30_ZW - PRUEFKLE | Validation class for independent validations | ||
| 190 | REG30_ZW - PR_AREA_AI | Air pressure area | ||
| 191 | REG30_ZW - PR_AREA_AO | Air pressure area | ||
| 192 | REG30_ZW - SPARTYPA | Division category | ||
| 193 | REG30_ZW - SPARTYPE | Division category | ||
| 194 | REG30_ZW - STANZNACE | Places after the decimal in a register | ||
| 195 | REG30_ZW - STANZVORE | Places before the decimal point in a register | ||
| 196 | REG30_ZW - STEUERGRPE | Control group for multiple meter reading order creation | ||
| 197 | REG30_ZW - TEMP_AREA | Temperature area | ||
| 198 | REG30_ZW - TEMP_AREAO | Temperature area | ||
| 199 | REG30_ZW - THGBERE | Inclusion of factors in thermal gas billing | ||
| 200 | REG30_ZW - THGVER | Gas procedure | ||
| 201 | REG30_ZW - TOUPERIODE | Time-of-use type | ||
| 202 | REG30_ZW - ZEITRAUME | Validity period | ||
| 203 | REG30_ZW - ZSPANNPE | Register factor: primary transformer voltage | ||
| 204 | REG30_ZW - ZSPANNSE | Register factor: secondary transformer voltage | ||
| 205 | REG30_ZW - ZSTROMPE | Register factor: primary transformer current | ||
| 206 | REG30_ZW - ZSTROMSE | Register factor: secondary transformer current | ||
| 207 | REG30_ZW - ZUSZAHLZWE | Volume correction factor | ||
| 208 | REG30_ZW - ZWARTA | Register type | ||
| 209 | REG30_ZW - ZWARTE | Register type | ||
| 210 | REG30_ZW - ZWFAKTE | Register factor | ||
| 211 | REG30_ZW - ZWKENNA | Register identification | ||
| 212 | REG30_ZW - ZWKENNE | Register identification | ||
| 213 | REG30_ZW - ZWNABR | Register not relevant to billing | ||
| 214 | REG30_ZW - ZWNUMMERA | Register | ||
| 215 | REG30_ZW - ZWNUMMERE | Register | ||
| 216 | REG30_ZW - ZWTYPA | Register category | ||
| 217 | REG30_ZW - ZWTYPE | Register category | ||
| 218 | REG30_ZW_A - ANZERGO | Number of meter reading results per meter reading | ||
| 219 | REG30_ZW_A - BLIWIRKA | Reactive, apparent, or active registers | ||
| 220 | REG30_ZW_A - CALOR_AREO | Calorific value district | ||
| 221 | REG30_ZW_A - CRGPRESSA | Gas correction pressure | ||
| 222 | REG30_ZW_A - GAS_PRS_ARA | Gas Pressure Area | ||
| 223 | REG30_ZW_A - HOEKORRO | Altitude correction pressure | ||
| 224 | REG30_ZW_A - KENNZIFFA | Code for Identifying a Register | ||
| 225 | REG30_ZW_A - KZAHLEA | Gas law deviation factor (set) | ||
| 226 | REG30_ZW_A - KZAHLTA | Actual gas law deviation factor | ||
| 227 | REG30_ZW_A - PR_AREA_AO | Air pressure area | ||
| 228 | REG30_ZW_A - SPARTYPA | Division category | ||
| 229 | REG30_ZW_A - TEMP_AREAO | Temperature area | ||
| 230 | REG30_ZW_A - ZWARTA | Register type | ||
| 231 | REG30_ZW_A - ZWKENNA | Register identification | ||
| 232 | REG30_ZW_A - ZWNUMMERA | Register | ||
| 233 | REG30_ZW_A - ZWTYPA | Register category | ||
| 234 | REG30_ZW_C - ANZERG | Number of meter reading results per meter reading | ||
| 235 | REG30_ZW_C - ANZERGO | Number of meter reading results per meter reading | ||
| 236 | REG30_ZW_C - BLIWIRKA | Reactive, apparent, or active registers | ||
| 237 | REG30_ZW_C - BLIWIRKE | Reactive, apparent, or active registers | ||
| 238 | REG30_ZW_C - CALOR_AREA | Calorific value district | ||
| 239 | REG30_ZW_C - CALOR_AREO | Calorific value district | ||
| 240 | REG30_ZW_C - CRGPRESS | Gas correction pressure | ||
| 241 | REG30_ZW_C - CRGPRESSA | Gas correction pressure | ||
| 242 | REG30_ZW_C - EQUNRA | Equipment Number | ||
| 243 | REG30_ZW_C - EQUNRE | Equipment Number | ||
| 244 | REG30_ZW_C - ERFASSNACE | Starting Point for Rounding | ||
| 245 | REG30_ZW_C - FESTTEMP | Fixed temperature | ||
| 246 | REG30_ZW_C - FIRST_ALLOC | Indicators | ||
| 247 | REG30_ZW_C - GAS_PRS_AR | Gas Pressure Area | ||
| 248 | REG30_ZW_C - GAS_PRS_ARA | Gas Pressure Area | ||
| 249 | REG30_ZW_C - GERAETA | Serial Number | ||
| 250 | REG30_ZW_C - GERAETE | Serial Number | ||
| 251 | REG30_ZW_C - GEWKEYA | Weighting key | ||
| 252 | REG30_ZW_C - GEWKEYE | Weighting key | ||
| 253 | REG30_ZW_C - HOEKORR | Altitude correction pressure | ||
| 254 | REG30_ZW_C - HOEKORRO | Altitude correction pressure | ||
| 255 | REG30_ZW_C - INTSIZEIDA | Interval Length ID | ||
| 256 | REG30_ZW_C - INTSIZEIDE | Interval Length ID | ||
| 257 | REG30_ZW_C - KENNZIFFA | Code for Identifying a Register | ||
| 258 | REG30_ZW_C - KENNZIFFE | Code for Identifying a Register | ||
| 259 | REG30_ZW_C - KZAHLE | Gas law deviation factor (set) | ||
| 260 | REG30_ZW_C - KZAHLEA | Gas law deviation factor (set) | ||
| 261 | REG30_ZW_C - KZAHLT | Actual gas law deviation factor | ||
| 262 | REG30_ZW_C - KZAHLTA | Actual gas law deviation factor | ||
| 263 | REG30_ZW_C - KZMESSWE | Nonmetering register | ||
| 264 | REG30_ZW_C - LOGIKZWA | Logical register number | ||
| 265 | REG30_ZW_C - LOGIKZWE | Logical register number | ||
| 266 | REG30_ZW_C - MASSBILLA | Unit of measurement for billing | ||
| 267 | REG30_ZW_C - MASSBILLE | Unit of measurement for billing | ||
| 268 | REG30_ZW_C - MASSREADA | Unit of measurement for meter reading | ||
| 269 | REG30_ZW_C - MASSREADE | Unit of measurement for meter reading | ||
| 270 | REG30_ZW_C - MATNRA | Material Number | ||
| 271 | REG30_ZW_C - MATNRE | Material Number | ||
| 272 | REG30_ZW_C - MEINS | Unit of measurement for meter reading | ||
| 273 | REG30_ZW_C - NABLESENA | Do Not Read Register | ||
| 274 | REG30_ZW_C - NABLESENE | Do Not Read Register | ||
| 275 | REG30_ZW_C - PREISKLAE | Price Class | ||
| 276 | REG30_ZW_C - PROFESTE | Consumption fixed value to be weighted linearly | ||
| 277 | REG30_ZW_C - PROPROZE | Consumption percentage for weighting | ||
| 278 | REG30_ZW_C - PRUEFKLA | Validation class for independent validations | ||
| 279 | REG30_ZW_C - PRUEFKLE | Validation class for independent validations | ||
| 280 | REG30_ZW_C - PR_AREA_AI | Air pressure area | ||
| 281 | REG30_ZW_C - PR_AREA_AO | Air pressure area | ||
| 282 | REG30_ZW_C - SPARTYPA | Division category | ||
| 283 | REG30_ZW_C - SPARTYPE | Division category | ||
| 284 | REG30_ZW_C - STANZNACE | Places after the decimal in a register | ||
| 285 | REG30_ZW_C - STANZVORE | Places before the decimal point in a register | ||
| 286 | REG30_ZW_C - STEUERGRPA | Control group for multiple meter reading order creation | ||
| 287 | REG30_ZW_C - STEUERGRPE | Control group for multiple meter reading order creation | ||
| 288 | REG30_ZW_C - TEMP_AREA | Temperature area | ||
| 289 | REG30_ZW_C - TEMP_AREAO | Temperature area | ||
| 290 | REG30_ZW_C - THGBERA | Inclusion of factors in thermal gas billing | ||
| 291 | REG30_ZW_C - THGBERE | Inclusion of factors in thermal gas billing | ||
| 292 | REG30_ZW_C - THGVER | Gas procedure | ||
| 293 | REG30_ZW_C - TOUPERIODA | Time-of-use type | ||
| 294 | REG30_ZW_C - TOUPERIODE | Time-of-use type | ||
| 295 | REG30_ZW_C - UEBERVERA | Transformation ratio | ||
| 296 | REG30_ZW_C - ZEITRAUME | Validity period | ||
| 297 | REG30_ZW_C - ZSPANNPE | Register factor: primary transformer voltage | ||
| 298 | REG30_ZW_C - ZSPANNSE | Register factor: secondary transformer voltage | ||
| 299 | REG30_ZW_C - ZSTROMPE | Register factor: primary transformer current | ||
| 300 | REG30_ZW_C - ZSTROMSE | Register factor: secondary transformer current | ||
| 301 | REG30_ZW_C - ZUSZAHLZWE | Volume correction factor | ||
| 302 | REG30_ZW_C - ZWARTA | Register type | ||
| 303 | REG30_ZW_C - ZWARTE | Register type | ||
| 304 | REG30_ZW_C - ZWFAKTE | Register factor | ||
| 305 | REG30_ZW_C - ZWKENNA | Register identification | ||
| 306 | REG30_ZW_C - ZWKENNE | Register identification | ||
| 307 | REG30_ZW_C - ZWNABR | Register not relevant to billing | ||
| 308 | REG30_ZW_C - ZWNUMMERA | Register | ||
| 309 | REG30_ZW_C - ZWNUMMERE | Register | ||
| 310 | REG30_ZW_C - ZWTYPA | Register category | ||
| 311 | REG30_ZW_C - ZWTYPE | Register category | ||
| 312 | REG30_ZW_C_A - EQUNRA | Equipment Number | ||
| 313 | REG30_ZW_C_A - GERAETA | Serial Number | ||
| 314 | REG30_ZW_C_A - GEWKEYA | Weighting key | ||
| 315 | REG30_ZW_C_A - INTSIZEIDA | Interval Length ID | ||
| 316 | REG30_ZW_C_A - LOGIKZWA | Logical register number | ||
| 317 | REG30_ZW_C_A - MASSBILLA | Unit of measurement for billing | ||
| 318 | REG30_ZW_C_A - MASSREADA | Unit of measurement for meter reading | ||
| 319 | REG30_ZW_C_A - MATNRA | Material Number | ||
| 320 | REG30_ZW_C_A - NABLESENA | Do Not Read Register | ||
| 321 | REG30_ZW_C_A - PRUEFKLA | Validation class for independent validations | ||
| 322 | REG30_ZW_C_A - STEUERGRPA | Control group for multiple meter reading order creation | ||
| 323 | REG30_ZW_C_A - THGBERA | Inclusion of factors in thermal gas billing | ||
| 324 | REG30_ZW_C_A - TOUPERIODA | Time-of-use type | ||
| 325 | REG30_ZW_C_A - UEBERVERA | Transformation ratio | ||
| 326 | REG30_ZW_C_E - EQUNRE | Equipment Number | ||
| 327 | REG30_ZW_C_E - ERFASSNACE | Starting Point for Rounding | ||
| 328 | REG30_ZW_C_E - FIRST_ALLOC | Indicators | ||
| 329 | REG30_ZW_C_E - GERAETE | Serial Number | ||
| 330 | REG30_ZW_C_E - LOGIKZWE | Logical register number | ||
| 331 | REG30_ZW_C_E - MATNRE | Material Number | ||
| 332 | REG30_ZW_E - ZWNUMMERE | Register | ||
| 333 | REG30_ZW_I - ANZERG | Number of meter reading results per meter reading | ||
| 334 | REG30_ZW_I - BLIWIRKE | Reactive, apparent, or active registers | ||
| 335 | REG30_ZW_I - CALOR_AREA | Calorific value district | ||
| 336 | REG30_ZW_I - CRGPRESS | Gas correction pressure | ||
| 337 | REG30_ZW_I - FESTTEMP | Fixed temperature | ||
| 338 | REG30_ZW_I - GAS_PRS_AR | Gas Pressure Area | ||
| 339 | REG30_ZW_I - GEWKEYE | Weighting key | ||
| 340 | REG30_ZW_I - HOEKORR | Altitude correction pressure | ||
| 341 | REG30_ZW_I - INTSIZEIDE | Interval Length ID | ||
| 342 | REG30_ZW_I - KENNZIFFE | Code for Identifying a Register | ||
| 343 | REG30_ZW_I - KZAHLE | Gas law deviation factor (set) | ||
| 344 | REG30_ZW_I - KZAHLT | Actual gas law deviation factor | ||
| 345 | REG30_ZW_I - KZMESSWE | Nonmetering register | ||
| 346 | REG30_ZW_I - MASSBILLE | Unit of measurement for billing | ||
| 347 | REG30_ZW_I - MASSREADE | Unit of measurement for meter reading | ||
| 348 | REG30_ZW_I - MEINS | Unit of measurement for meter reading | ||
| 349 | REG30_ZW_I - NABLESENE | Do Not Read Register | ||
| 350 | REG30_ZW_I - PREISKLAE | Price Class | ||
| 351 | REG30_ZW_I - PROFESTE | Consumption fixed value to be weighted linearly | ||
| 352 | REG30_ZW_I - PROPROZE | Consumption percentage for weighting | ||
| 353 | REG30_ZW_I - PRUEFKLE | Validation class for independent validations | ||
| 354 | REG30_ZW_I - PR_AREA_AI | Air pressure area | ||
| 355 | REG30_ZW_I - SPARTYPE | Division category | ||
| 356 | REG30_ZW_I - STANZNACE | Places after the decimal in a register | ||
| 357 | REG30_ZW_I - STANZVORE | Places before the decimal point in a register | ||
| 358 | REG30_ZW_I - STEUERGRPE | Control group for multiple meter reading order creation | ||
| 359 | REG30_ZW_I - TEMP_AREA | Temperature area | ||
| 360 | REG30_ZW_I - THGBERE | Inclusion of factors in thermal gas billing | ||
| 361 | REG30_ZW_I - THGVER | Gas procedure | ||
| 362 | REG30_ZW_I - TOUPERIODE | Time-of-use type | ||
| 363 | REG30_ZW_I - ZEITRAUME | Validity period | ||
| 364 | REG30_ZW_I - ZSPANNPE | Register factor: primary transformer voltage | ||
| 365 | REG30_ZW_I - ZSPANNSE | Register factor: secondary transformer voltage | ||
| 366 | REG30_ZW_I - ZSTROMPE | Register factor: primary transformer current | ||
| 367 | REG30_ZW_I - ZSTROMSE | Register factor: secondary transformer current | ||
| 368 | REG30_ZW_I - ZUSZAHLZWE | Volume correction factor | ||
| 369 | REG30_ZW_I - ZWARTE | Register type | ||
| 370 | REG30_ZW_I - ZWFAKTE | Register factor | ||
| 371 | REG30_ZW_I - ZWKENNE | Register identification | ||
| 372 | REG30_ZW_I - ZWNABR | Register not relevant to billing | ||
| 373 | REG30_ZW_I - ZWTYPE | Register category | ||
| 374 | REG30_ZW_I_E - ANZERG | Number of meter reading results per meter reading | ||
| 375 | REG30_ZW_I_E - BLIWIRKE | Reactive, apparent, or active registers | ||
| 376 | REG30_ZW_I_E - CALOR_AREA | Calorific value district | ||
| 377 | REG30_ZW_I_E - CRGPRESS | Gas correction pressure | ||
| 378 | REG30_ZW_I_E - FESTTEMP | Fixed temperature | ||
| 379 | REG30_ZW_I_E - GAS_PRS_AR | Gas Pressure Area | ||
| 380 | REG30_ZW_I_E - GEWKEYE | Weighting key | ||
| 381 | REG30_ZW_I_E - HOEKORR | Altitude correction pressure | ||
| 382 | REG30_ZW_I_E - INTSIZEIDE | Interval Length ID | ||
| 383 | REG30_ZW_I_E - KENNZIFFE | Code for Identifying a Register | ||
| 384 | REG30_ZW_I_E - KZAHLE | Gas law deviation factor (set) | ||
| 385 | REG30_ZW_I_E - KZAHLT | Actual gas law deviation factor | ||
| 386 | REG30_ZW_I_E - KZMESSWE | Nonmetering register | ||
| 387 | REG30_ZW_I_E - MASSBILLE | Unit of measurement for billing | ||
| 388 | REG30_ZW_I_E - MASSREADE | Unit of measurement for meter reading | ||
| 389 | REG30_ZW_I_E - MEINS | Unit of measurement for meter reading | ||
| 390 | REG30_ZW_I_E - NABLESENE | Do Not Read Register | ||
| 391 | REG30_ZW_I_E - PREISKLAE | Price Class | ||
| 392 | REG30_ZW_I_E - PROFESTE | Consumption fixed value to be weighted linearly | ||
| 393 | REG30_ZW_I_E - PROPROZE | Consumption percentage for weighting | ||
| 394 | REG30_ZW_I_E - PRUEFKLE | Validation class for independent validations | ||
| 395 | REG30_ZW_I_E - PR_AREA_AI | Air pressure area | ||
| 396 | REG30_ZW_I_E - SPARTYPE | Division category | ||
| 397 | REG30_ZW_I_E - STANZNACE | Places after the decimal in a register | ||
| 398 | REG30_ZW_I_E - STANZVORE | Places before the decimal point in a register | ||
| 399 | REG30_ZW_I_E - STEUERGRPE | Control group for multiple meter reading order creation | ||
| 400 | REG30_ZW_I_E - TEMP_AREA | Temperature area | ||
| 401 | REG30_ZW_I_E - THGBERE | Inclusion of factors in thermal gas billing | ||
| 402 | REG30_ZW_I_E - THGVER | Gas procedure | ||
| 403 | REG30_ZW_I_E - TOUPERIODE | Time-of-use type | ||
| 404 | REG30_ZW_I_E - ZEITRAUME | Validity period | ||
| 405 | REG30_ZW_I_E - ZSPANNPE | Register factor: primary transformer voltage | ||
| 406 | REG30_ZW_I_E - ZSPANNSE | Register factor: secondary transformer voltage | ||
| 407 | REG30_ZW_I_E - ZSTROMPE | Register factor: primary transformer current | ||
| 408 | REG30_ZW_I_E - ZSTROMSE | Register factor: secondary transformer current | ||
| 409 | REG30_ZW_I_E - ZUSZAHLZWE | Volume correction factor | ||
| 410 | REG30_ZW_I_E - ZWARTE | Register type | ||
| 411 | REG30_ZW_I_E - ZWFAKTE | Register factor | ||
| 412 | REG30_ZW_I_E - ZWKENNE | Register identification | ||
| 413 | REG30_ZW_I_E - ZWNABR | Register not relevant to billing | ||
| 414 | REG30_ZW_I_E - ZWTYPE | Register category | ||
| 415 | REG30_ZW_I_E_VIRT - BLIWIRKE | Reactive, apparent, or active registers | ||
| 416 | REG30_ZW_I_E_VIRT - INTSIZEIDE | Interval Length ID | ||
| 417 | REG30_ZW_I_E_VIRT - KZMESSWE | Nonmetering register | ||
| 418 | REG30_ZW_I_E_VIRT - MASSREADE | Unit of measurement for meter reading | ||
| 419 | REG30_ZW_I_E_VIRT - MEINS | Unit of measurement for meter reading | ||
| 420 | REG30_ZW_I_E_VIRT - SPARTYPE | Division category | ||
| 421 | REG30_ZW_I_E_VIRT - STANZNACE | Places after the decimal in a register | ||
| 422 | REG30_ZW_I_E_VIRT - STANZVORE | Places before the decimal point in a register | ||
| 423 | REG30_ZW_I_E_VIRT - THGBERE | Inclusion of factors in thermal gas billing | ||
| 424 | REG30_ZW_I_E_VIRT - ZSPANNPE | Register factor: primary transformer voltage | ||
| 425 | REG30_ZW_I_E_VIRT - ZSPANNSE | Register factor: secondary transformer voltage | ||
| 426 | REG30_ZW_I_E_VIRT - ZSTROMPE | Register factor: primary transformer current | ||
| 427 | REG30_ZW_I_E_VIRT - ZSTROMSE | Register factor: secondary transformer current | ||
| 428 | REG30_ZW_I_E_VIRT - ZWARTE | Register type | ||
| 429 | REG30_ZW_I_E_VIRT - ZWFAKTE | Register factor | ||
| 430 | REG30_ZW_I_E_VIRT - ZWKENNE | Register identification | ||
| 431 | REG30_ZW_I_E_VIRT - ZWTYPE | Register category | ||
| 432 | REGEN - KENNZX | Indicators | ||
| 433 | SYST - MSGID | ABAP System Field: Message ID | ||
| 434 | SYST - TFILL | ABAP System Field: Number of Rows in Internal Tables | ||
| 435 | TESPT - SPARTYP | Division category | ||
| 436 | V_EGER - BIS | Date at Which a Time Slice Expires | ||
| 437 | V_EGER - EQUNR | Equipment Number | ||
| 438 | V_EGER - GERAET | Serial Number | ||
| 439 | V_EGER - MATNR | Material Number | ||
| 440 | V_EGER - ZWGRUPPE | Register Group |