Message Number list used by SAP ABAP Program LDMEE1CIN (Include LDMEE1CIN)
SAP ABAP Program 
LDMEE1CIN (Include LDMEE1CIN) is using
| # | Object Type | Object Name | Object Description | Note |
|---|---|---|---|---|
 |
|
|||
| 1 |  Message Number |
DMEE - 366 | Error in node &1: reference to node &3 not allowed due to aggregration | |
| 2 | Message Number |
DMEE - 378 | No assignment rule specified for node with reference ID &1 | |
| 3 | Message Number |
DMEE - 377 | Error in suppl. segment of node &1: ref. ID &2 not assigned to a segment | |
| 4 | Message Number |
DMEE - 375 | Error in opt. supplementary segments of node &1: no node with ref. ID &2 | |
| 5 | Message Number |
DMEE - 374 | No aggregation relationships specified for node &1 | |
| 6 | Message Number |
DMEE - 373 | Node &1: constant missing, source value overwritten with initial value | |
| 7 | Message Number |
DMEE - 372 | No action node is created for node &1 | |
| 8 | Message Number |
DMEE - 371 | Node &1: you must define mapping using action nodes or an exit module | |
| 9 | Message Number |
DMEE - 370 | Node &1: mapping via action node not possible | |
| 10 | Message Number |
DMEE - 379 | Segment with reference ID &1 must have same level as segment &2 | |
| 11 | Message Number |
DMEE - 364 | Node &1: segment for end-of-line character; delayed output not possible | |
| 12 | Message Number |
DMEE - 363 | Node &1: empty segment for the end of line; no subnodes allowed | |
| 13 | Message Number |
DMEE - 362 | Node &1: delayed output of segment; no subnodes allowed | |
| 14 | Message Number |
DMEE - 360 | Node &1: aggregation with aggregation type 2 not possible for node &2 | |
| 15 | Message Number |
DMEE - 358 | Node &1: function module &2 has incorrect interface | |
| 16 | Message Number |
DMEE - 357 | Node &1: data type 'currency amount' not possible for constant value | |
| 17 | Message Number |
DMEE - 356 | Node &1: Invalid constant value &2 | |
| 18 | Message Number |
DMEE - 355 | Error in conditions for node &1: constant &2 has incorrect format | |
| 19 | Message Number |
DMEE - 389 | Error in conditions for node &1: operator missing in line &2 | |
| 20 | Message Number |
DMEE - 550 | Error in conditions for node &1: You cannot refer to node &3 | |
| 21 | Message Number |
DMEE - 398 | Error in node &1: Reference to node &3 not allowed because of counter | |
| 22 | Message Number |
DMEE - 396 | Node &1: segment does not have level 1 | |
| 23 | Message Number |
DMEE - 395 | No segment exists with level 1 | |
| 24 | Message Number |
DMEE - 393 | Error in checks for node &1: argument &2 is not allowed | |
| 25 | Message Number |
DMEE - 392 | Error in checks for node &1: inadmissible operator in line &2 | |
| 26 | Message Number |
DMEE - 391 | Error in checks for node &1: operator missing in line &2 | |
| 27 | Message Number |
DMEE - 390 | Error in conditions for node &1: inadmissible operator in line &2 | |
| 28 | Message Number |
DMEE - 354 | Error in conditions for node &1: source field &2 does not exist | |
| 29 | Message Number |
DMEE - 388 | Error in checks for node &1: node attribute missing for reference ID &2 | |
| 30 | Message Number |
DMEE - 387 | Error in checks for node &1: reference ID &2 not permitted | |
| 31 | Message Number |
DMEE - 386 | Error in checks for node &1: target field &2 does not exist | |
| 32 | Message Number |
DMEE - 385 | Error in conditions for node &1: target field &2 does not exist | |
| 33 | Message Number |
DMEE - 384 | Error in checks for node &1: constant &2 has incorrect format | |
| 34 | Message Number |
DMEE - 383 | Error in checks for node &1: argument &2 missing | |
| 35 | Message Number |
DMEE - 382 | Node &1: linking operator missing in line &2 of the check | |
| 36 | Message Number |
DMEE - 380 | Error in node &1: mapping in field &2 not permitted | |
| 37 | Message Number |
DMEE - 315 | Node &1: nodes with too many different format levels on same tree level | |
| 38 | Message Number |
DMEE - 324 | No exit module specified for node &1 | |
| 39 | Message Number |
DMEE - 323 | No atoms defined for node &1 | |
| 40 | Message Number |
DMEE - 322 | No aggregation relationships specified for node &1 | |
| 41 | Message Number |
DMEE - 321 | No reference ID specified for node &1 | |
| 42 | Message Number |
DMEE - 319 | No data type specified for node &1 | |
| 43 | Message Number |
DMEE - 318 | No length specified for node &1 | |
| 44 | Message Number |
DMEE - 317 | Node &1: level &2 is not defined | |
| 45 | Message Number |
DMEE - 316 | No level was assigned to node &1 | |
| 46 | Message Number |
DMEE - 325 | Node &1: no key value entered for table structure &2 | |
| 47 | Message Number |
DMEE - 311 | Node &1: defined length &2 is greater than element length &3 | |
| 48 | Message Number |
DMEE - 310 | Error in node &1: offset in target field (&2) >= field length | |
| 49 | Message Number |
DMEE - 309 | Error in node &1: number of references (&2) is too large | |
| 50 | Message Number |
DMEE - 307 | Incorrect level allocation in node &1: level &2 comes after level &3 | |
| 51 | Message Number |
DMEE - 306 | Error in node &1: source field &2 does not exist | |
| 52 | Message Number |
DMEE - 305 | Error in conditions for node &1: reference ID &2 is not permitted | |
| 53 | Message Number |
DMEE - 303 | No structure field defined as source/target field for node &1 | |
| 54 | Message Number |
DMEE - 302 | Error in node &1: reference to node with ref. ID &2 is not permitted | |
| 55 | Message Number |
DMEE - 338 | Node &1: segment has no subnode of type element/composite/technical node | |
| 56 | Message Number |
DMEE - 353 | Error in conditions for node &1: Argument &2 is missing | |
| 57 | Message Number |
DMEE - 352 | First tree node (&1) has nodes on the same level | |
| 58 | Message Number |
DMEE - 350 | Node &1: SAPscript name only possible for nodes assigned format level 1 | |
| 59 | Message Number |
DMEE - 348 | Node &1: date/time conversion only possible for data type "Character" | |
| 60 | Message Number |
DMEE - 347 | Node &1: function module &2 does not exist | |
| 61 | Message Number |
DMEE - 346 | Node &1: reference ID &2 is already being used | |
| 62 | Message Number |
DMEE - 345 | Error aggregating node &1: summation using &2 is not possible | |
| 63 | Message Number |
DMEE - 344 | Error in node &1: reference to another node, but no attribute specified | |
| 64 | Message Number |
DMEE - 008 | Node &2: level &1 does not have a unique base node | |
| 65 | Message Number |
DMEE - 337 | Node &1: aggregation not permitted using node &2 | |
| 66 | Message Number |
DMEE - 333 | Node &1: level increases by &3 | |
| 67 | Message Number |
DMEE - 331 | Error in conditions for node &1: node attribute missing for ref. ID &2 | |
| 68 | Message Number |
DMEE - 330 | Node &1: linking operator is missing in line &2 of the conditions | |
| 69 | Message Number |
DMEE - 329 | Error in node &1: reference ID &2 not permitted in aggregation | |
| 70 | Message Number |
DMEE - 328 | Error aggregating node &1: aggregation type is inconsistent | |
| 71 | Message Number |
DMEE - 327 | Error aggregating node &1: node &2 has incorrect data type | |
| 72 | Message Number |
DMEE - 326 | Error aggregating node &1: no node with reference ID &2 |
