Table/Structure Field list used by SAP ABAP Program LCRK0OK0 (Set the "effectivity" data)
SAP ABAP Program
LCRK0OK0 (Set the "effectivity" data) is using
# | Object Type | Object Name | Object Description | Note |
---|---|---|---|---|
![]() |
![]() |
|||
1 | ![]() |
KAKO - BEGZT | Start time in seconds (internal) | |
2 | ![]() |
KAKO - AZNOR | Number of individual capacities | |
3 | ![]() |
KAKO - VERSA | Active version of available capacity | |
4 | ![]() |
KAKO - REFID | Capacity ID | |
5 | ![]() |
KAKO - PLANR | Capacity planner group | |
6 | ![]() |
KAKO - PAUSE | Cumulative break time in seconds (internal) | |
7 | ![]() |
KAKO - NGRAD | Capacity utilization rate (percent) | |
8 | ![]() |
KAKO - NAME | Capacity name | |
9 | ![]() |
KAKO - MOSID | Grouping for Shift Definitions and Shift Sequences | |
10 | ![]() |
KAKO - MEINS | Base Unit of Measurement for Capacity | |
11 | ![]() |
KAKO - KAPLPL | Indicator: Capacity excluded from long-term planning | |
12 | ![]() |
KAKO - KAPIE | Capacity ID | |
13 | ![]() |
KAKO - KAPID | Capacity ID | |
14 | ![]() |
KAKO - KAPEH | Unit of measure of capacity | |
15 | ![]() |
KAKO - ENDZT | Finish time in seconds (internal) | |
16 | ![]() |
KAKT - KTEXT | Capacity short text | |
17 | ![]() |
KAPA - EINZT | Operating time in seconds (internal) | |
18 | ![]() |
KAPA - VERSN | Available capacity version | |
19 | ![]() |
KAPA - TAGNR | Current weekday number within the available capacity cycle | |
20 | ![]() |
KAPA - SCHNR | Shift number of the available capacity | |
21 | ![]() |
KAPA - PAUSE | Cumulative break time in seconds (internal) | |
22 | ![]() |
KAPA - NGRAD | Capacity utilization rate (percent) | |
23 | ![]() |
KAPA - KAPID | Capacity ID | |
24 | ![]() |
KAPA - KAPAZ | Capacity | |
25 | ![]() |
KAPA - ENDZT | Finish time in seconds (internal) | |
26 | ![]() |
KAPA - DATUB | End Date | |
27 | ![]() |
KAPA - BEGZT | Start time in seconds (internal) | |
28 | ![]() |
KAPA - ANZHL | Number of individual capacities | |
29 | ![]() |
KAPE - KAPID | Capacity ID | |
30 | ![]() |
KAPE - MEINB | Base Unit of Measurement for Capacity | |
31 | ![]() |
KAPE - MEINS | Unit of measure of capacity | |
32 | ![]() |
KAPM - KAPID | Capacity ID | |
33 | ![]() |
KAPM - KAPIE | Capacity ID | |
34 | ![]() |
KAPM - KTEXT | Object Name | |
35 | ![]() |
KAZY - KKOPF | Ind.: standard available capacity is valid for this interval | |
36 | ![]() |
KAZY - VERSN | Available capacity version | |
37 | ![]() |
KAZY - SPROG | Key for the shift sequence | |
38 | ![]() |
KAZY - KAPID | Capacity ID | |
39 | ![]() |
KAZY - DATUB | Valid-to date | |
40 | ![]() |
KAZY - ANZTG | Length of the interval cycle | |
41 | ![]() |
KAZY - ANZSH | Number of shifts in a day | |
42 | ![]() |
KAZY - FABTG | Indicator: Workdays | |
43 | ![]() |
RC68K - KAPAKZ | Indicator: available capacity of individual cap. maintained | |
44 | ![]() |
RC68K - WOTAG | Weekday | |
45 | ![]() |
RC68K - WONUM | Current weekday number within the available capacity cycle | |
46 | ![]() |
RC68K - VERSN | Available capacity version | |
47 | ![]() |
RC68K - PAUSE | Cumulative length of breaks per shift | |
48 | ![]() |
RC68K - MSEHT | Unit of Measurement Text (Maximum 10 Characters) | |
49 | ![]() |
RC68K - KAPLPL | Indicator: Long-term planning takes capacity into account | |
50 | ![]() |
RC68K - KAPEH | Unit of measure of capacity | |
51 | ![]() |
RC68K - KAPAZ | Capacity expressed in a specific unit of measure | |
52 | ![]() |
RC68K - FLG_NEWPOS | General Flag | |
53 | ![]() |
RC68K - FLG_DEF | General Flag | |
54 | ![]() |
RC68K - ENDZT | Finish time | |
55 | ![]() |
RC68K - EINZH | Operating time in hours | |
56 | ![]() |
RC68K - DATUV | Valid-From Date | |
57 | ![]() |
RC68K - BEGZT | Start time | |
58 | ![]() |
RC68K - AKTYP | Activity category in SAP transaction | |
59 | ![]() |
RCRKAKO - KAPID | Capacity ID | |
60 | ![]() |
RCRKAKO - NGRAD | Capacity utilization rate (percent) | |
61 | ![]() |
RCRKAKO - KAPLPL | Indicator: Capacity excluded from long-term planning | |
62 | ![]() |
RCRKAPA - DATUB | End Date | |
63 | ![]() |
RCRKAPA - KAPID | Capacity ID | |
64 | ![]() |
RCRKAPA - SCHNR | Shift number of the available capacity | |
65 | ![]() |
RCRKAPA - VERSN | Available capacity version | |
66 | ![]() |
RCRKAPE - KAPID | Capacity ID | |
67 | ![]() |
RCRKAPM - KAPID | Capacity ID | |
68 | ![]() |
RCRKAPM - KAPIE | Capacity ID | |
69 | ![]() |
SCREEN - NAME | SCREEN-NAME | |
70 | ![]() |
SCREEN - ACTIVE | SCREEN-ACTIVE | |
71 | ![]() |
SYST - LANGU | ABAP System Field: Language Key of Text Environment | |
72 | ![]() |
SYST - LOOPC | ABAP System Field: Visible Lines of Step Loop | |
73 | ![]() |
SYST - SROWS | ABAP System Field: Number of Screen Rows | |
74 | ![]() |
SYST - STEPL | ABAP System Field: Current Step Loop or Table Control Line | |
75 | ![]() |
SYST - TABIX | ABAP System Field: Row Index of Internal Tables | |
76 | ![]() |
T006A - MSEHL | Unit of Measurement Text (Maximum 30 Characters) | |
77 | ![]() |
T006A - MSEHT | Unit of Measurement Text (Maximum 10 Characters) | |
78 | ![]() |
TC10 - TRTYP | Transaction type |