Data Element list used by SAP ABAP PINF APPL_GHO_ALLOC_BE (APPL_GHO_ALLOC_BE)
SAP ABAP PINF
APPL_GHO_ALLOC_BE (APPL_GHO_ALLOC_BE) is using
# | Object Type | Object Name | Object Description | Note |
---|---|---|---|---|
![]() |
![]() |
|||
1 | ![]() |
DS_SPLIT_ID | Down Stream Split ID | |
2 | ![]() |
DS_SP_ID | Down Stream Split ID | |
3 | ![]() |
GHO_ALLOCATE | Allocate Indicator | |
4 | ![]() |
GHO_ALLOC_AUTO_FLOW | Auto Flow Indicator | |
5 | ![]() |
GHO_ALLOC_BASIS | Allocation Basis | |
6 | ![]() |
GHO_ALLOC_DEP_MATERIAL | Dependent Material | |
7 | ![]() |
GHO_ALLOC_DIRECTION | Allocation Direction | |
8 | ![]() |
GHO_ALLOC_GLG_TCM | Gas Lift Gas Theoretical Calculation Method | |
9 | ![]() |
GHO_ALLOC_MATERIAL | Material relevant for allocation | |
10 | ![]() |
GHO_ALLOC_NODE_RULE_ID | Node Rule ID | |
11 | ![]() |
GHO_ALLOC_NW_RULE_ID | Network Allocation Rule ID | |
12 | ![]() |
GHO_ALLOC_PERIOD_FROM | From date-time of Period for Allocation | |
13 | ![]() |
GHO_ALLOC_PERIOD_TO | Timestamp of Period for Allocation | |
14 | ![]() |
GHO_ALLOC_PFN_RULE_ID | Production Flow Network Rule Id | |
15 | ![]() |
GHO_ALLOC_PURPOSE | Allocation Purpose | |
16 | ![]() |
GHO_ALLOC_RUN_ID | Identifier for an Instance of the Allocation Engine Run | |
17 | ![]() |
GHO_ALLOC_SEQ_NO | Allocation Sequence Number | |
18 | ![]() |
GHO_ALLOC_STATUS | Allocation Run Status | |
19 | ![]() |
GHO_ALLOC_STATUS_TYPE | Allocation Status Type | |
20 | ![]() |
GHO_ALLOC_TCM | Theoretical Calculation Method (TCM) for estd. production. | |
21 | ![]() |
GHO_ALLOC_TOL | Tolerance for Allocation | |
22 | ![]() |
GHO_ALLOC_TOR_BUS_KEY | TOR Business Key | |
23 | ![]() |
GHO_ALLOC_TYPE | Allocation Type | |
24 | ![]() |
GHO_ALLOC_UOM_GROUP | UoM Group | |
25 | ![]() |
GHO_ALLOC_WC_TD_ID | Identifier for an Instance of the Allocation Well Completion | |
26 | ![]() |
GHO_ANALYSIS_BASIS | Chemical Analysis Basis for Capture Measurements | |
27 | ![]() |
GHO_ANALYSIS_LEVEL | Chemical Analysis Level for Capture Measurements | |
28 | ![]() |
GHO_ANALYSIS_TYPE | Chemical Analysis Type for Capture Measurements | |
29 | ![]() |
GHO_CHARACTERISTICS_ALLOC | Characteristics in Well Test | |
30 | ![]() |
GHO_COMPONENT | Name of the Component | |
31 | ![]() |
GHO_COMPONENT_ALLOC | Indicator for Component Allocation | |
32 | ![]() |
GHO_COMSUMPTION_METHOD | Allocation Consumption Method | |
33 | ![]() |
GHO_COM_WC_ID | Allocation Commingled Well Completion | |
34 | ![]() |
GHO_CONF_QUANT_CATEGORY | Configurable Quantity Category | |
35 | ![]() |
GHO_CONF_QUANT_CATEGORY_DESC | Configurable Quantity Category Description | |
36 | ![]() |
GHO_CONSUMPTION | Quantity Consumed at the Node | |
37 | ![]() |
GHO_CONTRIBUTION_ALLOC | Well Completion Contribution | |
38 | ![]() |
GHO_DECAY_CONST | Decay Constant | |
39 | ![]() |
GHO_DECIMALS_NUM | Decimal Range | |
40 | ![]() |
GHO_DEP_DISP_ID | Dependent Disposition ID | |
41 | ![]() |
GHO_DISP_DESC | Disposition Description | |
42 | ![]() |
GHO_DISP_ID | Disposition ID | |
43 | ![]() |
GHO_END_DATE_ALLOC | End of Test Date | |
44 | ![]() |
GHO_END_SHUT_IN_ALLOC | End of Shut In Date and Time | |
45 | ![]() |
GHO_END_SHUT_IN_DATE_ALLOC | Well Completion End of Shut In Date | |
46 | ![]() |
GHO_END_SHUT_IN_TIME_ALLOC | Well Completion End of Shut In Time | |
47 | ![]() |
GHO_END_TEST_ALLOC | Date and Time of End of Test | |
48 | ![]() |
GHO_END_TIME_ALLOC | End of Test Time | |
49 | ![]() |
GHO_FINAL_IND | Final Indicator for Allocation Results | |
50 | ![]() |
GHO_ITEMIZED_ALLOC | Indicator for Itemized Allocation | |
51 | ![]() |
GHO_LINK_ID | ID for Link between Two Nodes | |
52 | ![]() |
GHO_MATERIAL | Material | |
53 | ![]() |
GHO_MAXFLOW_RATE | Quantity for Maximum flow rate | |
54 | ![]() |
GHO_MEAS_CAT_ID | Measurement Category | |
55 | ![]() |
GHO_MEAS_TYPE | Measurement Type | |
56 | ![]() |
GHO_MRH_RULE_ID | MRH Rule ID | |
57 | ![]() |
GHO_MRH_SEQ_NO | MRH Sequence Number | |
58 | ![]() |
GHO_NET_OBJ_TYPE_DESC | Network Object Type Description | |
59 | ![]() |
GHO_NODE_ALLOC_RELEVANT | Indicates if a Node is Relevant for Allocation | |
60 | ![]() |
GHO_NODE_CAPACITY | Capacity of the Node | |
61 | ![]() |
GHO_NODE_ID | ID of the Node in the Network | |
62 | ![]() |
GHO_NODE_NON_ADJUSTABLE | Indicates if a Node in a Network is Non-Adjustable | |
63 | ![]() |
GHO_NODE_TERMN_POINT | Indicates if a Node in a Network is a Termination Point | |
64 | ![]() |
GHO_NOTIFICATION_ALLOC | Down Time Notification Number | |
65 | ![]() |
GHO_NOTIF_REASON_ALLOC | Reason for Well Downtime Notification | |
66 | ![]() |
GHO_NUM_OF_TESTS | Number of tests for Thoeretical Calculation Methods | |
67 | ![]() |
GHO_NUM_OF_TESTS_GLG_TCM | Number of tests for Gas Lift Gas TCM | |
68 | ![]() |
GHO_OBJ_FACT_DESC | Network Object Factor Description | |
69 | ![]() |
GHO_OBJ_FACT_UNIQ_ID | Factors Unique ID | |
70 | ![]() |
GHO_OBJ_ID_DESC | Object ID Description | |
71 | ![]() |
GHO_OVERRIDE_EXISTS | Does an Override Exist for Well Completion Theo - Indicator | |
72 | ![]() |
GHO_PFN_ID | ID of the Production Flow Network | |
73 | ![]() |
GHO_PQCURVE_RULE_ID | PQ Curve Rule ID | |
74 | ![]() |
GHO_PRESSURE | Pressure | |
75 | ![]() |
GHO_PRIORITY_ID | Measurement Prioirty ID | |
76 | ![]() |
GHO_PRODUCT | Product on which Allocation is Performed (Oil, Gas, Water) | |
77 | ![]() |
GHO_QTY_REQD | Indicates if Quantity is Required or not | |
78 | ![]() |
GHO_QTY_TYPE | Quantity Type | |
79 | ![]() |
GHO_QUANTITY | Quantity Measured/Planned against the Node:Vol,Mass,Energy | |
80 | ![]() |
GHO_QUANTITY_CATEGORY | Quantity Category | |
81 | ![]() |
GHO_QUANTITY_CATEGORY_DESC | Quantity Category description | |
82 | ![]() |
GHO_QUANTITY_UOM | OPM Specific Unit Of Measure | |
83 | ![]() |
GHO_RULE_SOURCE_TYPE | Source Type for MRH Rules | |
84 | ![]() |
GHO_RULE_TYPE | Rule type | |
85 | ![]() |
GHO_SHUT_IN_DATE_ALLOC | Well Completion Shut In Date | |
86 | ![]() |
GHO_SHUT_IN_DURATION_ALLOC | Well Completion Shut In Duration | |
87 | ![]() |
GHO_SHUT_IN_TIME_ALLOC | Start of Well Completion Shut In Time | |
88 | ![]() |
GHO_START_DATE_ALLOC | Production Start Date | |
89 | ![]() |
GHO_START_SHUT_IN_ALLOC | Start of Shut In Date and Time | |
90 | ![]() |
GHO_START_TEST_ALLOC | Start Date and Time | |
91 | ![]() |
GHO_START_TIME_ALLOC | Production Start Time | |
92 | ![]() |
GHO_STATUS | Rule Status | |
93 | ![]() |
GHO_TCM_TYPE | Theoretical Calculation Method Type | |
94 | ![]() |
GHO_TEST_DURATION_ALLOC | Well Test Duration | |
95 | ![]() |
GHO_THEO_ACT_IND | Theoretical Actual Indicator | |
96 | ![]() |
GHO_THEO_OVR_ID | Allocation Theoretical Override ID | |
97 | ![]() |
GHO_UMRSL | Conversion Group | |
98 | ![]() |
GHO_USE_FOR_PROD_NW | Use for Production Networks | |
99 | ![]() |
GHO_VALID_FROM_TS | Valid from Timestamp | |
100 | ![]() |
GHO_VALID_TO_TS | Valid to Timestamp | |
101 | ![]() |
GHO_WC_DURATION | Well Completion Duration | |
102 | ![]() |
GHO_WC_THEO_OVR_EXISTS | Does an Override Exist for Well Completion Theo - Indicator | |
103 | ![]() |
GHO_WC_THEO_OVR_VAL | Value of the Theoretical Override for WC | |
104 | ![]() |
OPM_ALLOC_UOM_RULE_ID | Allocation UOM Rule ID | |
105 | ![]() |
OPM_STATUS | Rule Status |