Table/Structure Field list used by SAP ABAP Function Module ISU_FILL_ETDZ_WA_INSTALL (Privat: Die Workaerea etdz aus der Workarea zw aufbauen.)
SAP ABAP Function Module
ISU_FILL_ETDZ_WA_INSTALL (Privat: Die Workaerea etdz aus der Workarea zw aufbauen.) is using
# | Object Type | Object Name | Object Description | Note |
---|---|---|---|---|
![]() |
![]() |
|||
1 | ![]() |
ETDZ - ANZERG | Number of meter reading results per meter reading | |
2 | ![]() |
ETDZ - BLIWIRK | Reactive, apparent, or active registers | |
3 | ![]() |
ETDZ - CALOR_AREA | Calorific value district | |
4 | ![]() |
ETDZ - CRGPRESS | Gas correction pressure | |
5 | ![]() |
ETDZ - GAS_PRS_AR | Gas Pressure Area | |
6 | ![]() |
ETDZ - GEWKEY | Weighting key | |
7 | ![]() |
ETDZ - HOEKORR | Altitude correction pressure | |
8 | ![]() |
ETDZ - INTSIZEID | Interval Length ID | |
9 | ![]() |
ETDZ - KENNZIFF | Code for Identifying a Register | |
10 | ![]() |
ETDZ - KZAHLE | Gas law deviation factor (set) | |
11 | ![]() |
ETDZ - KZAHLT | Actual gas law deviation factor | |
12 | ![]() |
ETDZ - KZMESSW | Nonmetering register | |
13 | ![]() |
ETDZ - LOGIKZW | Logical register number | |
14 | ![]() |
ETDZ - MASSBILL | Unit of measurement for billing | |
15 | ![]() |
ETDZ - MASSREAD | Unit of measurement for meter reading | |
16 | ![]() |
ETDZ - NABLESEN | Do Not Read Register | |
17 | ![]() |
ETDZ - PRUEFKL | Validation class for independent validations | |
18 | ![]() |
ETDZ - PR_AREA_AI | Air pressure area | |
19 | ![]() |
ETDZ - SPARTYP | Division category | |
20 | ![]() |
ETDZ - STANZNAC | Places after the decimal in a register | |
21 | ![]() |
ETDZ - STANZVOR | Places before the decimal point in a register | |
22 | ![]() |
ETDZ - STEUERGRP | Control group for multiple meter reading order creation | |
23 | ![]() |
ETDZ - TEMP_AREA | Temperature area | |
24 | ![]() |
ETDZ - THGBER | Inclusion of factors in thermal gas billing | |
25 | ![]() |
ETDZ - TOUPERIOD | Time-of-use type | |
26 | ![]() |
ETDZ - UEBERVER | Transformation ratio | |
27 | ![]() |
ETDZ - ZSPANNP | Register factor: primary transformer voltage | |
28 | ![]() |
ETDZ - ZSPANNS | Register factor: secondary transformer voltage | |
29 | ![]() |
ETDZ - ZSTROMP | Register factor: primary transformer current | |
30 | ![]() |
ETDZ - ZSTROMS | Register factor: secondary transformer current | |
31 | ![]() |
ETDZ - ZWART | Register type | |
32 | ![]() |
ETDZ - ZWFAKT | Register factor | |
33 | ![]() |
ETDZ - ZWKENN | Register identification | |
34 | ![]() |
ETDZ - ZWNUMMER | Register | |
35 | ![]() |
ETDZ - ZWTYP | Register category | |
36 | ![]() |
ETDZ_LOC - CALOR_AREA | Calorific value district | |
37 | ![]() |
ETDZ_LOC - CRGPRESS | Gas correction pressure | |
38 | ![]() |
ETDZ_LOC - GAS_PRS_AR | Gas Pressure Area | |
39 | ![]() |
ETDZ_LOC - HOEKORR | Altitude correction pressure | |
40 | ![]() |
ETDZ_LOC - KZAHLE | Gas law deviation factor (set) | |
41 | ![]() |
ETDZ_LOC - KZAHLT | Actual gas law deviation factor | |
42 | ![]() |
ETDZ_LOC - PR_AREA_AI | Air pressure area | |
43 | ![]() |
ETDZ_LOC - TEMP_AREA | Temperature area | |
44 | ![]() |
ETDZ_LOC - THGBER | Inclusion of factors in thermal gas billing | |
45 | ![]() |
ISU07_ZW - ANZERG | Number of meter reading results per meter reading | |
46 | ![]() |
ISU07_ZW - BLIWIRKE | Reactive, apparent, or active registers | |
47 | ![]() |
ISU07_ZW - CALOR_AREA | Calorific value district | |
48 | ![]() |
ISU07_ZW - CRGPRESS | Gas correction pressure | |
49 | ![]() |
ISU07_ZW - GAS_PRS_AR | Gas Pressure Area | |
50 | ![]() |
ISU07_ZW - GEWKEYE | Weighting key | |
51 | ![]() |
ISU07_ZW - HOEKORR | Altitude correction pressure | |
52 | ![]() |
ISU07_ZW - INTSIZEIDE | Interval Length ID | |
53 | ![]() |
ISU07_ZW - KENNZIFFE | Code for Identifying a Register | |
54 | ![]() |
ISU07_ZW - KZAHLE | Gas law deviation factor (set) | |
55 | ![]() |
ISU07_ZW - KZAHLT | Actual gas law deviation factor | |
56 | ![]() |
ISU07_ZW - KZMESSWE | Nonmetering register | |
57 | ![]() |
ISU07_ZW - LOGIKZWE | Logical register number | |
58 | ![]() |
ISU07_ZW - MASSBILLE | Unit of measurement for billing | |
59 | ![]() |
ISU07_ZW - MASSREADE | Unit of measurement for meter reading | |
60 | ![]() |
ISU07_ZW - NABLESENE | Do Not Read Register | |
61 | ![]() |
ISU07_ZW - PRUEFKLE | Validation class for independent validations | |
62 | ![]() |
ISU07_ZW - PR_AREA_AI | Air pressure area | |
63 | ![]() |
ISU07_ZW - SPARTYPE | Division category | |
64 | ![]() |
ISU07_ZW - STANZNACE | Places after the decimal in a register | |
65 | ![]() |
ISU07_ZW - STANZVORE | Places before the decimal point in a register | |
66 | ![]() |
ISU07_ZW - STEUERGRPE | Control group for multiple meter reading order creation | |
67 | ![]() |
ISU07_ZW - TEMP_AREA | Temperature area | |
68 | ![]() |
ISU07_ZW - THGBERE | Inclusion of factors in thermal gas billing | |
69 | ![]() |
ISU07_ZW - TOUPERIODE | Time-of-use type | |
70 | ![]() |
ISU07_ZW - UEBERVERE | Transformation ratio | |
71 | ![]() |
ISU07_ZW - ZSPANNPE | Register factor: primary transformer voltage | |
72 | ![]() |
ISU07_ZW - ZSPANNSE | Register factor: secondary transformer voltage | |
73 | ![]() |
ISU07_ZW - ZSTROMPE | Register factor: primary transformer current | |
74 | ![]() |
ISU07_ZW - ZSTROMSE | Register factor: secondary transformer current | |
75 | ![]() |
ISU07_ZW - ZWARTE | Register type | |
76 | ![]() |
ISU07_ZW - ZWFAKTE | Register factor | |
77 | ![]() |
ISU07_ZW - ZWKENNE | Register identification | |
78 | ![]() |
ISU07_ZW - ZWNUMMERE | Register | |
79 | ![]() |
ISU07_ZW - ZWTYPE | Register category | |
80 | ![]() |
ISU_ZWFAKT - ZSPANNP | Register factor: primary transformer voltage | |
81 | ![]() |
ISU_ZWFAKT - ZSPANNS | Register factor: secondary transformer voltage | |
82 | ![]() |
ISU_ZWFAKT - ZSTROMP | Register factor: primary transformer current | |
83 | ![]() |
ISU_ZWFAKT - ZSTROMS | Register factor: secondary transformer current | |
84 | ![]() |
REG30_ZW - ANZERG | Number of meter reading results per meter reading | |
85 | ![]() |
REG30_ZW - BLIWIRKE | Reactive, apparent, or active registers | |
86 | ![]() |
REG30_ZW - CALOR_AREA | Calorific value district | |
87 | ![]() |
REG30_ZW - CRGPRESS | Gas correction pressure | |
88 | ![]() |
REG30_ZW - GAS_PRS_AR | Gas Pressure Area | |
89 | ![]() |
REG30_ZW - GEWKEYE | Weighting key | |
90 | ![]() |
REG30_ZW - HOEKORR | Altitude correction pressure | |
91 | ![]() |
REG30_ZW - INTSIZEIDE | Interval Length ID | |
92 | ![]() |
REG30_ZW - KENNZIFFE | Code for Identifying a Register | |
93 | ![]() |
REG30_ZW - KZAHLE | Gas law deviation factor (set) | |
94 | ![]() |
REG30_ZW - KZAHLT | Actual gas law deviation factor | |
95 | ![]() |
REG30_ZW - KZMESSWE | Nonmetering register | |
96 | ![]() |
REG30_ZW - MASSBILLE | Unit of measurement for billing | |
97 | ![]() |
REG30_ZW - MASSREADE | Unit of measurement for meter reading | |
98 | ![]() |
REG30_ZW - NABLESENE | Do Not Read Register | |
99 | ![]() |
REG30_ZW - PRUEFKLE | Validation class for independent validations | |
100 | ![]() |
REG30_ZW - PR_AREA_AI | Air pressure area | |
101 | ![]() |
REG30_ZW - SPARTYPE | Division category | |
102 | ![]() |
REG30_ZW - STANZNACE | Places after the decimal in a register | |
103 | ![]() |
REG30_ZW - STANZVORE | Places before the decimal point in a register | |
104 | ![]() |
REG30_ZW - STEUERGRPE | Control group for multiple meter reading order creation | |
105 | ![]() |
REG30_ZW - TEMP_AREA | Temperature area | |
106 | ![]() |
REG30_ZW - THGBERE | Inclusion of factors in thermal gas billing | |
107 | ![]() |
REG30_ZW - TOUPERIODE | Time-of-use type | |
108 | ![]() |
REG30_ZW - UEBERVERE | Transformation ratio | |
109 | ![]() |
REG30_ZW - ZSPANNPE | Register factor: primary transformer voltage | |
110 | ![]() |
REG30_ZW - ZSPANNSE | Register factor: secondary transformer voltage | |
111 | ![]() |
REG30_ZW - ZSTROMPE | Register factor: primary transformer current | |
112 | ![]() |
REG30_ZW - ZSTROMSE | Register factor: secondary transformer current | |
113 | ![]() |
REG30_ZW - ZWARTE | Register type | |
114 | ![]() |
REG30_ZW - ZWFAKTE | Register factor | |
115 | ![]() |
REG30_ZW - ZWKENNE | Register identification | |
116 | ![]() |
REG30_ZW - ZWNUMMERE | Register | |
117 | ![]() |
REG30_ZW - ZWTYPE | Register category | |
118 | ![]() |
REG30_ZW_C - ANZERG | Number of meter reading results per meter reading | |
119 | ![]() |
REG30_ZW_C - BLIWIRKE | Reactive, apparent, or active registers | |
120 | ![]() |
REG30_ZW_C - CALOR_AREA | Calorific value district | |
121 | ![]() |
REG30_ZW_C - CRGPRESS | Gas correction pressure | |
122 | ![]() |
REG30_ZW_C - GAS_PRS_AR | Gas Pressure Area | |
123 | ![]() |
REG30_ZW_C - GEWKEYE | Weighting key | |
124 | ![]() |
REG30_ZW_C - HOEKORR | Altitude correction pressure | |
125 | ![]() |
REG30_ZW_C - INTSIZEIDE | Interval Length ID | |
126 | ![]() |
REG30_ZW_C - KENNZIFFE | Code for Identifying a Register | |
127 | ![]() |
REG30_ZW_C - KZAHLE | Gas law deviation factor (set) | |
128 | ![]() |
REG30_ZW_C - KZAHLT | Actual gas law deviation factor | |
129 | ![]() |
REG30_ZW_C - KZMESSWE | Nonmetering register | |
130 | ![]() |
REG30_ZW_C - LOGIKZWE | Logical register number | |
131 | ![]() |
REG30_ZW_C - MASSBILLE | Unit of measurement for billing | |
132 | ![]() |
REG30_ZW_C - MASSREADE | Unit of measurement for meter reading | |
133 | ![]() |
REG30_ZW_C - NABLESENE | Do Not Read Register | |
134 | ![]() |
REG30_ZW_C - PRUEFKLE | Validation class for independent validations | |
135 | ![]() |
REG30_ZW_C - PR_AREA_AI | Air pressure area | |
136 | ![]() |
REG30_ZW_C - SPARTYPE | Division category | |
137 | ![]() |
REG30_ZW_C - STANZNACE | Places after the decimal in a register | |
138 | ![]() |
REG30_ZW_C - STANZVORE | Places before the decimal point in a register | |
139 | ![]() |
REG30_ZW_C - STEUERGRPE | Control group for multiple meter reading order creation | |
140 | ![]() |
REG30_ZW_C - TEMP_AREA | Temperature area | |
141 | ![]() |
REG30_ZW_C - THGBERE | Inclusion of factors in thermal gas billing | |
142 | ![]() |
REG30_ZW_C - TOUPERIODE | Time-of-use type | |
143 | ![]() |
REG30_ZW_C - UEBERVERE | Transformation ratio | |
144 | ![]() |
REG30_ZW_C - ZSPANNPE | Register factor: primary transformer voltage | |
145 | ![]() |
REG30_ZW_C - ZSPANNSE | Register factor: secondary transformer voltage | |
146 | ![]() |
REG30_ZW_C - ZSTROMPE | Register factor: primary transformer current | |
147 | ![]() |
REG30_ZW_C - ZSTROMSE | Register factor: secondary transformer current | |
148 | ![]() |
REG30_ZW_C - ZWARTE | Register type | |
149 | ![]() |
REG30_ZW_C - ZWFAKTE | Register factor | |
150 | ![]() |
REG30_ZW_C - ZWKENNE | Register identification | |
151 | ![]() |
REG30_ZW_C - ZWNUMMERE | Register | |
152 | ![]() |
REG30_ZW_C - ZWTYPE | Register category | |
153 | ![]() |
REG30_ZW_C_E - LOGIKZWE | Logical register number | |
154 | ![]() |
REG30_ZW_E - ZWNUMMERE | Register | |
155 | ![]() |
REG30_ZW_I - ANZERG | Number of meter reading results per meter reading | |
156 | ![]() |
REG30_ZW_I - BLIWIRKE | Reactive, apparent, or active registers | |
157 | ![]() |
REG30_ZW_I - CALOR_AREA | Calorific value district | |
158 | ![]() |
REG30_ZW_I - CRGPRESS | Gas correction pressure | |
159 | ![]() |
REG30_ZW_I - GAS_PRS_AR | Gas Pressure Area | |
160 | ![]() |
REG30_ZW_I - GEWKEYE | Weighting key | |
161 | ![]() |
REG30_ZW_I - HOEKORR | Altitude correction pressure | |
162 | ![]() |
REG30_ZW_I - INTSIZEIDE | Interval Length ID | |
163 | ![]() |
REG30_ZW_I - KENNZIFFE | Code for Identifying a Register | |
164 | ![]() |
REG30_ZW_I - KZAHLE | Gas law deviation factor (set) | |
165 | ![]() |
REG30_ZW_I - KZAHLT | Actual gas law deviation factor | |
166 | ![]() |
REG30_ZW_I - KZMESSWE | Nonmetering register | |
167 | ![]() |
REG30_ZW_I - MASSBILLE | Unit of measurement for billing | |
168 | ![]() |
REG30_ZW_I - MASSREADE | Unit of measurement for meter reading | |
169 | ![]() |
REG30_ZW_I - NABLESENE | Do Not Read Register | |
170 | ![]() |
REG30_ZW_I - PRUEFKLE | Validation class for independent validations | |
171 | ![]() |
REG30_ZW_I - PR_AREA_AI | Air pressure area | |
172 | ![]() |
REG30_ZW_I - SPARTYPE | Division category | |
173 | ![]() |
REG30_ZW_I - STANZNACE | Places after the decimal in a register | |
174 | ![]() |
REG30_ZW_I - STANZVORE | Places before the decimal point in a register | |
175 | ![]() |
REG30_ZW_I - STEUERGRPE | Control group for multiple meter reading order creation | |
176 | ![]() |
REG30_ZW_I - TEMP_AREA | Temperature area | |
177 | ![]() |
REG30_ZW_I - THGBERE | Inclusion of factors in thermal gas billing | |
178 | ![]() |
REG30_ZW_I - TOUPERIODE | Time-of-use type | |
179 | ![]() |
REG30_ZW_I - UEBERVERE | Transformation ratio | |
180 | ![]() |
REG30_ZW_I - ZSPANNPE | Register factor: primary transformer voltage | |
181 | ![]() |
REG30_ZW_I - ZSPANNSE | Register factor: secondary transformer voltage | |
182 | ![]() |
REG30_ZW_I - ZSTROMPE | Register factor: primary transformer current | |
183 | ![]() |
REG30_ZW_I - ZSTROMSE | Register factor: secondary transformer current | |
184 | ![]() |
REG30_ZW_I - ZWARTE | Register type | |
185 | ![]() |
REG30_ZW_I - ZWFAKTE | Register factor | |
186 | ![]() |
REG30_ZW_I - ZWKENNE | Register identification | |
187 | ![]() |
REG30_ZW_I - ZWTYPE | Register category | |
188 | ![]() |
REG30_ZW_I_E - ANZERG | Number of meter reading results per meter reading | |
189 | ![]() |
REG30_ZW_I_E - BLIWIRKE | Reactive, apparent, or active registers | |
190 | ![]() |
REG30_ZW_I_E - CALOR_AREA | Calorific value district | |
191 | ![]() |
REG30_ZW_I_E - CRGPRESS | Gas correction pressure | |
192 | ![]() |
REG30_ZW_I_E - GAS_PRS_AR | Gas Pressure Area | |
193 | ![]() |
REG30_ZW_I_E - GEWKEYE | Weighting key | |
194 | ![]() |
REG30_ZW_I_E - HOEKORR | Altitude correction pressure | |
195 | ![]() |
REG30_ZW_I_E - INTSIZEIDE | Interval Length ID | |
196 | ![]() |
REG30_ZW_I_E - KENNZIFFE | Code for Identifying a Register | |
197 | ![]() |
REG30_ZW_I_E - KZAHLE | Gas law deviation factor (set) | |
198 | ![]() |
REG30_ZW_I_E - KZAHLT | Actual gas law deviation factor | |
199 | ![]() |
REG30_ZW_I_E - KZMESSWE | Nonmetering register | |
200 | ![]() |
REG30_ZW_I_E - MASSBILLE | Unit of measurement for billing | |
201 | ![]() |
REG30_ZW_I_E - MASSREADE | Unit of measurement for meter reading | |
202 | ![]() |
REG30_ZW_I_E - NABLESENE | Do Not Read Register | |
203 | ![]() |
REG30_ZW_I_E - PRUEFKLE | Validation class for independent validations | |
204 | ![]() |
REG30_ZW_I_E - PR_AREA_AI | Air pressure area | |
205 | ![]() |
REG30_ZW_I_E - SPARTYPE | Division category | |
206 | ![]() |
REG30_ZW_I_E - STANZNACE | Places after the decimal in a register | |
207 | ![]() |
REG30_ZW_I_E - STANZVORE | Places before the decimal point in a register | |
208 | ![]() |
REG30_ZW_I_E - STEUERGRPE | Control group for multiple meter reading order creation | |
209 | ![]() |
REG30_ZW_I_E - TEMP_AREA | Temperature area | |
210 | ![]() |
REG30_ZW_I_E - THGBERE | Inclusion of factors in thermal gas billing | |
211 | ![]() |
REG30_ZW_I_E - TOUPERIODE | Time-of-use type | |
212 | ![]() |
REG30_ZW_I_E - UEBERVERE | Transformation ratio | |
213 | ![]() |
REG30_ZW_I_E - ZSPANNPE | Register factor: primary transformer voltage | |
214 | ![]() |
REG30_ZW_I_E - ZSPANNSE | Register factor: secondary transformer voltage | |
215 | ![]() |
REG30_ZW_I_E - ZSTROMPE | Register factor: primary transformer current | |
216 | ![]() |
REG30_ZW_I_E - ZSTROMSE | Register factor: secondary transformer current | |
217 | ![]() |
REG30_ZW_I_E - ZWARTE | Register type | |
218 | ![]() |
REG30_ZW_I_E - ZWFAKTE | Register factor | |
219 | ![]() |
REG30_ZW_I_E - ZWKENNE | Register identification | |
220 | ![]() |
REG30_ZW_I_E - ZWTYPE | Register category | |
221 | ![]() |
REG30_ZW_I_E_VIRT - BLIWIRKE | Reactive, apparent, or active registers | |
222 | ![]() |
REG30_ZW_I_E_VIRT - INTSIZEIDE | Interval Length ID | |
223 | ![]() |
REG30_ZW_I_E_VIRT - KZMESSWE | Nonmetering register | |
224 | ![]() |
REG30_ZW_I_E_VIRT - MASSREADE | Unit of measurement for meter reading | |
225 | ![]() |
REG30_ZW_I_E_VIRT - SPARTYPE | Division category | |
226 | ![]() |
REG30_ZW_I_E_VIRT - STANZNACE | Places after the decimal in a register | |
227 | ![]() |
REG30_ZW_I_E_VIRT - STANZVORE | Places before the decimal point in a register | |
228 | ![]() |
REG30_ZW_I_E_VIRT - THGBERE | Inclusion of factors in thermal gas billing | |
229 | ![]() |
REG30_ZW_I_E_VIRT - UEBERVERE | Transformation ratio | |
230 | ![]() |
REG30_ZW_I_E_VIRT - ZSPANNPE | Register factor: primary transformer voltage | |
231 | ![]() |
REG30_ZW_I_E_VIRT - ZSPANNSE | Register factor: secondary transformer voltage | |
232 | ![]() |
REG30_ZW_I_E_VIRT - ZSTROMPE | Register factor: primary transformer current | |
233 | ![]() |
REG30_ZW_I_E_VIRT - ZSTROMSE | Register factor: secondary transformer current | |
234 | ![]() |
REG30_ZW_I_E_VIRT - ZWARTE | Register type | |
235 | ![]() |
REG30_ZW_I_E_VIRT - ZWFAKTE | Register factor | |
236 | ![]() |
REG30_ZW_I_E_VIRT - ZWKENNE | Register identification | |
237 | ![]() |
REG30_ZW_I_E_VIRT - ZWTYPE | Register category |