SAP ABAP Message Class OC (IS-Oil: BDRP Bulk Distribution Requirement Planning messages)
Basic Data
Hierarchy
☛
IS-OIL (Software Component) IS-OIL
⤷ IS-OIL-DS-BDR (Application Component) Bulk Distribution Requirements Planning
⤷ OII (Package) BDRP Bulk Distribution Requirement Planning
⤷ IS-OIL-DS-BDR (Application Component) Bulk Distribution Requirements Planning
⤷ OII (Package) BDRP Bulk Distribution Requirement Planning
Attributes
Message class | OC | |
Short Description | IS-Oil: BDRP Bulk Distribution Requirement Planning messages | |
Changed On | 20110810 | |
Last Changed At | 143332 |
Messages
# | Message | Message Short Text | Documentation status | Authorization check |
---|---|---|---|---|
1 | 000 | Transaction & is missing from table T180 | ||
2 | 001 | Internal numbering will be used | ||
3 | 002 | Transaction mode is not valid. Transaction terminated | ||
4 | 003 | Number & is not within permitted number range | ||
5 | 004 | Entry already exists with Timestamp & & &. | Space: object requires documentation | |
6 | 005 | The event '&' is not a valid event in silo management tank dips | Space: object requires documentation | |
7 | 008 | BDRP control record was updated in this client | Space: object requires documentation | |
8 | 009 | Table group authorization OII missing | Space: object requires documentation | |
9 | 010 | Unspecified error on function call - current module pool & | ||
10 | 014 | Very few numbers left | ||
11 | 015 | Assigned number & is the last available number | ||
12 | 016 | No more numbers available for new storage object characteristic segment | ||
13 | 017 | Internal number range could not be automatically created | ||
14 | 018 | No more numbers available for new operations time window set | ||
15 | 019 | Number range interval & has not been defined | Space: object requires documentation | |
16 | 050 | DB ERROR, DB table= &, key= &, op= &, rc= & | ||
17 | 051 | Online delete not permitted for & | ||
18 | 052 | Invalid update code & detected for object & | ||
19 | 055 | ARRAY op error: DB table=&, op=&, rc=&, lines=& | ||
20 | 056 | SAVE op error: & unknown entries on & posting table, key= & & | ||
21 | 057 | SAVE op error: Unknown update type & on & posting table, key= & | ||
22 | 064 | Error in accessing the IS-Oil BDRP function exclusion table | Space: object requires documentation | |
23 | 070 | Error during update of Storage Objects | Space: object requires documentation | |
24 | 071 | Error during update of Meters | Space: object requires documentation | |
25 | 072 | Error during update of Replenishment Parameters | Space: object requires documentation | |
26 | 073 | Error during update of Site Control Parameters | Space: object requires documentation | |
27 | 100 | Please enter a & | ||
28 | 101 | Entry & for & does not exist | Space: object requires documentation | |
29 | 102 | Entry & does not exist | Space: object requires documentation | |
30 | 106 | Tank & at storage location & plant & not found | Space: object requires documentation | |
31 | 107 | Number range interval & has not been defined | Space: object requires documentation | |
32 | 108 | UoM & does not exist in language & | ||
33 | 109 | Number of digits exceeds max. of & | ||
34 | 110 | Customer & is not a ship-to party - SO assignment not possible | Space: object requires documentation | |
35 | 111 | Unknown object type for storage object segment assignment | ||
36 | 112 | Meter reading exceeds specified no. of digits | ||
37 | 113 | Customer & is not a ship-to party. Meter assignment not possible | Space: object requires documentation | |
38 | 114 | Value 0 is not allowed for meter conversion factor | ||
39 | 115 | Customer & is not a Ship-to party - meter assignment not possible | ||
40 | 116 | Customer & is not a Ship-To party - site control is not valid | ||
41 | 117 | Unknown object type for meter assignment | ||
42 | 118 | For TSW-TD meter recon. max digits allowed & | Space: object requires documentation | |
43 | 119 | Equnr. &1 is already assigned to the meter with seq no. &2 (locid=&3) | Space: object requires documentation | |
44 | 121 | Delete table OIIGMMK key & failed (RC=&) | ||
45 | 122 | Update table OIIGMMKS key & & failed (RC=&) | ||
46 | 123 | Insert table OIIGMMKS key & & failed (RC=&) | ||
47 | 124 | Delete table OIIGMMKS key & & failed (RC=&) | ||
48 | 125 | General meter & has been created | ||
49 | 126 | General meter & has been changed | ||
50 | 127 | General meter & has been deleted | ||
51 | 128 | Material assignment validity not consistent with linked meter &1 | The short text describes the object sufficiently | |
52 | 130 | General meter cannot be linked to both Equipment and Funct.Location | ||
53 | 140 | Deletion of general meter assignment cancelled | ||
54 | 150 | Meter type & missing from GMM type definition table | ||
55 | 151 | Meter & has been created | ||
56 | 152 | Meter assignment processing cancelled | ||
57 | 153 | Meter & has been changed | ||
58 | 154 | Meter & has not been changed | ||
59 | 155 | Meter does not exist | ||
60 | 157 | Unknown error in Function Module OII_METER_DETAIL | Space: object requires documentation | |
61 | 158 | Meter processing only possible after choosing a meter sequence number | ||
62 | 159 | No meters have been defined for & so far | ||
63 | 160 | Unknown error when retrieving customer indices for meters | ||
64 | 161 | More than one material currently assigned to the meter & | ||
65 | 162 | Meter deletion has been cancelled | ||
66 | 163 | Meters have been saved | ||
67 | 164 | Meters have not been changed | ||
68 | 165 | New meter reading smaller than previous one | ||
69 | 166 | End date must be larger than Start date | ||
70 | 167 | End time must be larger than Start time | ||
71 | 168 | Start date before allowed date | ||
72 | 169 | End meter reading smaller than start meter reading | ||
73 | 170 | New meter reading smaller than previous reading | ||
74 | 171 | No & specified for GMM access mode & | Space: object requires documentation | |
75 | 172 | Old meter reading smaller than previous reading | ||
76 | 173 | Start meter reading smaller than previous meter reading | ||
77 | 174 | Start time before allowed time | ||
78 | 175 | Meter has been saved | ||
79 | 176 | Meter has not been changed | ||
80 | 177 | Meter reading history exists for meter with sequence number &1 | Space: object requires documentation | |
81 | 178 | Overlapping periods for meters | Space: object requires documentation | |
82 | 179 | This will close the old meter with sequence number &1 at date &2 time &3 | Space: object requires documentation | |
83 | 180 | Internal error when closing old meter | Space: object requires documentation | |
84 | 181 | Storage object has already been assigned | Space: object requires documentation | |
85 | 182 | Only one storage object can be assigned to the meter | Space: object requires documentation | |
86 | 200 | Storage object type & missing from SOC type definition table | ||
87 | 201 | No storage object class is assigned to the storage object type & | ||
88 | 202 | Storage object class & has been retrieved for the SOC type & | ||
89 | 203 | Storage object cannot be linked to both equipment and funct.location ! | Space: object requires documentation | |
90 | 204 | Linked & & does not exist | ||
91 | 205 | & & does not exist | ||
92 | 206 | More than one material currently assigned to the SOC segment & | ||
93 | 207 | Number range interval & has not been defined | ||
94 | 208 | No segment data have been maintained for Storage objetc type & | ||
95 | 209 | Storage object characteristics have been saved | ||
96 | 210 | Storage object characteristics have not been changed | ||
97 | 211 | Deletion of assignment not possible on material level ! | ||
98 | 212 | Functional location & is not flagged for single installation | ||
99 | 213 | More than one equipment unit found for functional location & | Space: object requires documentation | |
100 | 214 | No equipment unit is installed at functional location & | Space: object requires documentation | |
101 | 215 | Please enter the capacity of the storage object segment | ||
102 | 216 | The unpumpable quantity cannot be greater than the total capacity | ||
103 | 217 | The permiss. cont. quantity cannot be greater than the total capacity | ||
104 | 220 | Index already exists | ||
105 | 221 | Error while retrieving data from internal table | ||
106 | 222 | Please select a column of a table control to sort the table entries | ||
107 | 230 | No & specified for SOCSEG access mode & | Space: object requires documentation | |
108 | 231 | Unknown access mode within form & in module pool & | Space: object requires documentation | |
109 | 232 | Storage object characteristic segment ID already exists | ||
110 | 233 | Storage object characteristic segment does not exist | ||
111 | 234 | Unknown error within function module OII_SOCSEG_DETAIL | Space: object requires documentation | |
112 | 235 | Storage object processing is possible only after choosing a SOC segment | Space: object requires documentation | |
113 | 236 | End and planned end date of assignment must be greater than start date | Space: object requires documentation | |
114 | 237 | Storage object characteristics segment & has been created | ||
115 | 238 | Storage object characteristics segment & has been changed | ||
116 | 239 | Storage object segment assignment processing cancelled | ||
117 | 240 | Storage object segment deletion processing cancelled | ||
118 | 241 | Unknown response from POPUP_TO_CONFIRM_WITH_MESSAGE | ||
119 | 242 | No storage object characteristics have been defined for & so far | ||
120 | 243 | Storage object characteristic segment & has not been changed | ||
121 | 244 | Unknown error when retrieving customer indices for storage objects | ||
122 | 245 | Unknown error when retrieving location indices for storage objects | ||
123 | 246 | Cannot assign storage object to itself ! | ||
124 | 247 | Sequence number & does not exist for & | ||
125 | 248 | Sequence numbers not supported for storage object access mode & | ||
126 | 249 | Error encountered during SOCSEG delete processing, RC = & | ||
127 | 250 | End-date of the new assignment has been re-set | ||
128 | 251 | No sequence number could be determined for storage object grouping | ||
129 | 252 | Please select only one column | ||
130 | 253 | No other storage objects available for assignment to this storage object | ||
131 | 254 | Function code &1 not supported for control &2 | Space: object requires documentation | |
132 | 255 | The entered storage object does not exist for location &. | The short text describes the object sufficiently | |
133 | 260 | Storage object characteristics taken over from location & | ||
134 | 261 | Customer linked to location & - SO characteristics found for customer | ||
135 | 262 | Storage object characteristics found at customer and location level | Space: object requires documentation | |
136 | 263 | Displayed SOC segments are already the location SOC segments | ||
137 | 270 | No & specified for meter accessmode & | Space: object requires documentation | |
138 | 280 | Tank assignment only possible for measurement point with type &. | Space: object requires documentation | |
139 | 297 | Failure when reading screen fields | Space: object requires documentation | |
140 | 300 | Customer / material combination is not valid | Space: object requires documentation | |
141 | 301 | Stock levels for customer & have not been changed | ||
142 | 302 | Stock levels for customer & have been changed | ||
143 | 303 | Material does not exist | ||
144 | 304 | Meter & (&) is different from location meter index (&) | Space: object requires documentation | |
145 | 305 | Access type A requires a material, service type, and equipment | Space: object requires documentation | |
146 | 306 | Access type C requires a meter number | Space: object requires documentation | |
147 | 307 | Access type E requires a material and equipment | Space: object requires documentation | |
148 | 308 | Access type M requires a material | Space: object requires documentation | |
149 | 309 | Access type S requires a material and a service type | Space: object requires documentation | |
150 | 310 | Date validity from is required | Space: object requires documentation | |
151 | 311 | Date and time validity from is required | Space: object requires documentation | |
152 | 312 | Please assign material handling group first to business location | Space: object requires documentation | |
153 | 313 | Material &2 is not defined in material handling group &1 | Space: object requires documentation | |
154 | 314 | No duplicate keys allowed for meter access type &1 | Space: object requires documentation | |
155 | 350 | Default Plant/St.Loc. for the location in object links not maintained | Space: object requires documentation | |
156 | 351 | Maintenance only possible from business location &1 | Space: object requires documentation | |
157 | 410 | Unspecified error when processing OTW set & & | ||
158 | 412 | Unspecified error when processing OTWS set & | ||
159 | 502 | Reference to storage object type & was successful | ||
160 | 504 | LVCC set was successfully copied from SO type & | ||
161 | 505 | No lin/vol conversion set was found for SO & | ||
162 | 506 | No lin/vol conversion set items were found for SO & | ||
163 | 507 | Unexpected return code &2 when processing LVCC set &1 | ||
164 | 508 | Unexpected return code & when processing item with index & | ||
165 | 509 | The LVCC set no. &2 was not expected in SOCSEG &1 | ||
166 | 510 | LVCC set with SOCSEG ID &1 already exists - error | ||
167 | 511 | Unexpected return code in delete item process, RC = & | ||
168 | 512 | At least one duplicate entry was deleted from the uploaded data | ||
169 | 513 | High order truncation error occurred at least once during the upload | ||
170 | 514 | No activation, when less than 2 lin/vol conversion set items were found | Space: object requires documentation | |
171 | 515 | Number of decimal places in linear constant was not changed | ||
172 | 516 | A valid time entry is required | Space: object requires documentation | |
173 | 522 | Unspecified error when processing linear constant & | ||
174 | 523 | Unspecified error when processing LVCC set number & | ||
175 | 524 | Unspecified error when reading LVCC item table for set number & | ||
176 | 529 | To delete an item, please place the cursor on a valid table entry | Space: object requires documentation | |
177 | 537 | Reference type & has no LVCC set - request cancelled | ||
178 | 544 | Linear input value is less than the lowest LV constant | Space: object requires documentation | |
179 | 545 | Linear input value is greater than highest LV constant | ||
180 | 546 | Unknown error when calculating volumetric value for linear input | ||
181 | 547 | Unknown error detected in CUSTOMER-FUNCTION '340' | ||
182 | 548 | Unknown error detected in BAdI OII_DIP_CALCULATION~MODIFY_CALCULATION | Space: object requires documentation | |
183 | 549 | Error when preparing to delete LVCC set | ||
184 | 551 | Internal error - LVCC set was not specified in re-reference operation | ||
185 | 555 | Specified unit of measure & not of dimension type & | ||
186 | 556 | An unknown error occurred while checking UoM & | ||
187 | 560 | Download cancelled - no data found | ||
188 | 561 | LVCC download file & created - size & bytes | ||
189 | 562 | Error during download, return code = & | ||
190 | 563 | LVCC download cancelled | ||
191 | 564 | LVCC local file upload processing cancelled | ||
192 | 565 | LVCC set upload from local file successful | ||
193 | 566 | No previous calibration history sets found | Space: object requires documentation | |
194 | 567 | No valid calibration history set found | Space: object requires documentation | |
195 | 570 | Strapping table height entry already exists, new entry is deleted | Space: object requires documentation | |
196 | 571 | LVCC set is consistent | ||
197 | 572 | LVCC set is not consistent - first found error is displayed | ||
198 | 573 | No activation possible, if strapping set is not consistent ! | Space: object requires documentation | |
199 | 574 | Activation date and time not valid | Space: object requires documentation | |
200 | 580 | Water height is higher than total height | Space: object requires documentation | |
201 | 581 | Material density is zero | Space: object requires documentation | |
202 | 590 | Unexpected return code when processing standard dialog box | Space: object requires documentation | |
203 | 591 | Request cancelled | ||
204 | 600 | Delivery date of item & out of tank assignment validity period | Space: object requires documentation | |
205 | 601 | Tank capacity is smaller than the order quantity of item & | Space: object requires documentation | |
206 | 602 | Tank has different material from order item & | Space: object requires documentation | |
207 | 603 | Tank ID of order item & not valid | Space: object requires documentation | |
208 | 604 | Capacity compare not possible for sales unit & and storage unit & | Space: object requires documentation | |
209 | 605 | Tank ID not valid for item &. Tank entry will be deleted | Space: object requires documentation | |
210 | 606 | No tanks currently defined for item ship-to & | Space: object requires documentation | |
211 | 609 | Table group authorization OIK missing | Space: object requires documentation | |
212 | 701 | The time range is invalid | Space: object requires documentation | |
213 | 702 | That lead time item already exists | Space: object requires documentation | |
214 | 703 | Unspecified error when processing lead time entry | ||
215 | 705 | Time range overlap detected for & & - please re-specify | Space: object requires documentation | |
216 | 706 | Plant & does not exist | Space: object requires documentation | |
217 | 707 | Site control parameters for plant & do not exist | Space: object requires documentation | |
218 | 709 | Time range overlap in time windows defining &1 - please respecify | Space: object requires documentation | |
219 | 710 | Site sales hours referenced from standard sales hour set & | ||
220 | 711 | Sales hour set reference has been cleared - modification is possible | Space: object requires documentation | |
221 | 712 | Error accessing sales hour set & | ||
222 | 716 | Factory calendar & does not exist | Space: object requires documentation | |
223 | 717 | Operations time window reference set & does not exist | ||
224 | 718 | Unknown error during TW start and end time check - contact sys.admin. | Space: object requires documentation | |
225 | 719 | Start time ( &1 ) should not exceed end time ( &2 ) - please correct | ||
226 | 720 | Unknown error in OTWS detail processing - contact system administrator | ||
227 | 721 | No time window set details have been created for set type &1 version &2 | ||
228 | 722 | Error when trying to process OTWS type input | ||
229 | 723 | Error when trying to delete entry with key & & & | ||
230 | 724 | Operations time window set type & does not exist | ||
231 | 725 | Operations time window reference set & does not exist | ||
232 | 726 | To view time window set detail - please select line with data | ||
233 | 727 | Time window applicability & does not exist | ||
234 | 728 | Error on conversion of time field & & | ||
235 | 729 | To delete lead time items, please select at least one entry | ||
236 | 730 | End time must exceed start time - please correct. | Space: object requires documentation | |
237 | 731 | Start time is not changeable. Change back to &, delete and recreate entry | Space: object requires documentation | |
238 | 732 | Weekday cannot be changed. Change back to &, delete and recreate entry | Space: object requires documentation | |
239 | 733 | Sales order entry default group & does not exist | ||
240 | 734 | Default business location partner role & does not exist | ||
241 | 735 | Default consignment plant & does not exist | ||
242 | 736 | Default consignment storage location & & does not exist | ||
243 | 740 | Error on read of Operations Time Window Set data | ||
244 | 741 | Error during update of reference set & | Space: object requires documentation | |
245 | 787 | Error during G/L posting in BADI OII_DIP_ANALYSIS~HANDLE_USER_COMMAND | Space: object requires documentation | |
246 | 788 | Error while setting Customer fields in BADI OII_DIP_ADD_COLUMNS | The short text describes the object sufficiently | |
247 | 789 | Error while check Customer fields in BAdI OII_DIP_CALCULATION | Space: object requires documentation | |
248 | 790 | Database error encountered when accessing site control parameters | ||
249 | 800 | Tank dip & already posted on & & from user & | Space: object requires documentation | |
250 | 801 | End date of tank dip range must be greater than start date | Space: object requires documentation | |
251 | 802 | Material & & not found in a tank at plant & storage location & | Space: object requires documentation | |
252 | 803 | Check the non-special stock or at least one special stock indicator | Space: object requires documentation | |
253 | 804 | Tank dips were posted succesfully | Space: object requires documentation | |
254 | 805 | Materials in this tank: base UoM &, UoM group & and conv.group & | Space: object requires documentation | |
255 | 806 | Assigned material segment of material & already assigned to tank & | Space: object requires documentation | |
256 | 807 | Tax status check requires a valuation type specification | Space: object requires documentation | |
257 | 808 | Incorrect material assignment of materials with product type '3' | Space: object requires documentation | |
258 | 809 | Wrong material group: assigned mat.grp & <> new mat.grp. & | Space: object requires documentation | |
259 | 810 | Wrong old material no.: assigned old mat.no. & <> new old mat.no. & | Space: object requires documentation | |
260 | 811 | Wrong loading group: assigned load.grp. & <> new load.grp. & | Space: object requires documentation | |
261 | 812 | Wrong ED tax group: assigned tax group & <> new tax group & | Space: object requires documentation | |
262 | 813 | Wrong oil content: assigned oil content & <> new oil content & | Space: object requires documentation | |
263 | 814 | Wrong mat.tax group: assigned mat.tax grp. & <> mat.tax grp. & | Space: object requires documentation | |
264 | 815 | Wrong tax status: assigned tax status & <> new tax status & | Space: object requires documentation | |
265 | 816 | Last material movement after end date of mat.assignment (& &) | Space: object requires documentation | |
266 | 817 | Activation must be after & & | Space: object requires documentation | |
267 | 818 | No tank assignment allowed for storage location & | Space: object requires documentation | |
268 | 819 | No material assignment to tank found at date & time & | Space: object requires documentation | |
269 | 820 | Dip data for tank & at plant & stor.loc. & time stamp & incomplete | Space: object requires documentation | |
270 | 821 | No material assigned to tank until now | Space: object requires documentation | |
271 | 822 | No dip date entered | Space: object requires documentation | |
272 | 823 | Unrealistic dip - displaced volume & & greater than strapped volume & & | Space: object requires documentation | |
273 | 824 | No material assignment to tank found between & & and & &. | Space: object requires documentation | |
274 | 825 | No dip found | Space: object requires documentation | |
275 | 826 | No tank specified | Space: object requires documentation | |
276 | 827 | Tank dip below min.fltg roof height of &, no fltg.roof correction applied | Space: object requires documentation | |
277 | 828 | Tank dip for tank & & & at & entered twice | Space: object requires documentation | |
278 | 829 | End point in time must be larger than start point in time | Space: object requires documentation | |
279 | 830 | Material assignment only possible with zero stock | Space: object requires documentation | |
280 | 831 | Begin of material assignment must be after & & | Space: object requires documentation | |
281 | 832 | No dip pair found to be analyzed in the given time range | Space: object requires documentation | |
282 | 833 | End date is in future, no further goods movements are possible | Space: object requires documentation | |
283 | 834 | Entered batch & has valuation type &, different from entered Val.type & | Space: object requires documentation | |
284 | 835 | No deletion possible, goods movements posted after begin of assignment | Space: object requires documentation | |
285 | 836 | No deletion possible, tank dip posted after begin of assignment | Space: object requires documentation | |
286 | 837 | No deletion possible, goods movements were posted into this tank | Space: object requires documentation | |
287 | 838 | No tank dip and goods movement possible, a related tank is blocked | Space: object requires documentation | |
288 | 839 | No deactivation possible, calibration set already used for tank dips | Space: object requires documentation | |
289 | 840 | Please enter a valid SOC type | Space: object requires documentation | |
290 | 841 | Please enter a valid Measurement point | Space: object requires documentation | |
291 | 842 | Customer defined User-Commands for G/L analysis must start with 'Z' | Space: object requires documentation | |
292 | 843 | Stock in additional qty append. table inconsistent with table MARD/MCHB | Space: object requires documentation | |
293 | 844 | Line & will be deleted. Plant/storage location/Tank details unknown. | Space: object requires documentation | |
294 | 850 | No material documents found for the specified selection criteria | Space: object requires documentation | |
295 | 851 | Tank capacity of & & smaller than volume at maximum height of & &. | Space: object requires documentation | |
296 | 852 | Sum of planned capacities & & is greater than tank capacity & & | Space: object requires documentation | |
297 | 853 | Tank capacity & & is below sum of planned cap. of the assigned mat. & & | Space: object requires documentation | |
298 | 854 | Unit of measure of assigned planned material cap. was changed from & to & | Space: object requires documentation | |
299 | 855 | Storage Object(s) exist referencing SOCtype &. So can't be deleted | Space: object requires documentation | |
300 | 856 | Rerun "Create anal.data" report for stor.loc & tank &. | Space: object requires documentation | |
301 | 857 | Tank not found | Space: object requires documentation | |
302 | 858 | Report 'Create analysis data' should be rerun | Space: object requires documentation | |
303 | 860 | Tank at plant & storage location & not found, but tank location exists | Space: object requires documentation | |
304 | 861 | Tank & is blocked for use. So can not be used. | Space: object requires documentation | |
305 | 862 | Tank & expiry is reached at this item schedule date | Space: object requires documentation | |
306 | 864 | No valid SOC class found | Space: object requires documentation | |
307 | 865 | Dip readings exist after & for the material & so validity can't be ended | Space: object requires documentation | |
308 | 866 | New material start date/time cannot be same as that of other assignments | Space: object requires documentation | |
309 | 900 | Stocks exist for & and so validity of assignment can not be ended. | Space: object requires documentation | |
310 | 901 | Space: object requires documentation |
History
Last changed on/by | 20110810 | SAP | |
SAP Release Created in |