SAP ABAP Message Class SL (System log)
Basic Data
Hierarchy
☛
SAP_BASIS (Software Component) SAP Basis Component
⤷
BC-CCM-MON-SLG (Application Component) SAP System Log
⤷
SLOG (Package) System log

⤷

⤷

Attributes
Message class | ![]() |
SL |
Short Description | ![]() |
System log |
Changed On | ![]() |
20140121 |
Last Changed At | ![]() |
103756 |
Messages
# | Message | Message Short Text | Documentation status | Authorization check |
---|---|---|---|---|
1 | ![]() |
You are not authorized to run transaction SYSLOG | Space: object requires documentation | |
2 | ![]() |
Enter transaction code | ||
3 | ![]() |
Transaction & is not in table STC. | ||
4 | ![]() |
Transaction & is not an ABAP transaction | Space: object requires documentation | |
5 | ![]() |
Transaction & is currently locked. | ||
6 | ![]() |
Transaction & has no module pool. | ||
7 | ![]() |
&1 | The short text describes the object sufficiently | |
8 | ![]() |
No more entries | The short text describes the object sufficiently | |
9 | ![]() |
Run-time analysis of transaction & was completed successfully. | ||
10 | ![]() |
You cannot note the position for remote system logs | ||
11 | ![]() |
You can only deleted your own files | ||
12 | ![]() |
System log mail sending process was started. | ||
13 | ![]() |
Information on which mail you have received/not received | ||
14 | ![]() |
has been lost. | ||
15 | ![]() |
Since not a lot of mail is sent to you repeatedly, | ||
16 | ![]() |
something could be missing. | ||
17 | ![]() |
The program $ does not exist | ||
18 | ![]() |
Mail from the system log mail process on computer | ||
19 | ![]() |
System no. | ||
20 | ![]() |
. | ||
21 | ![]() |
Here is a system log entry of category | ||
22 | ![]() |
. | ||
23 | ![]() |
System log mail from | ||
24 | ![]() |
System log mail from the system log mail process on computer | ||
25 | ![]() |
: | ||
26 | ![]() |
Personal management | ||
27 | ![]() |
The system log mail sending process was much too slow | ||
28 | ![]() |
There for the total contents are from | ||
29 | ![]() |
system log file(s) | ||
30 | ![]() |
with the time range from | ||
31 | ![]() |
to | ||
32 | ![]() |
not sent | ||
33 | ![]() |
In total there were | ||
34 | ![]() |
system log entries up to | ||
35 | ![]() |
. | ||
36 | ![]() |
Check only one item | Space: object requires documentation | |
37 | ![]() |
Command & with status & is not supported | Space: object requires documentation | |
38 | ![]() |
No selection criteria can be taken from this line | Space: object requires documentation | |
39 | ![]() |
Choose one option | Space: object requires documentation | |
40 | ![]() |
[F2] cannot be used here | Space: object requires documentation | |
41 | ![]() |
&1&2 messages will be omitted in the next formatting | Space: object requires documentation | |
42 | ![]() |
System log message &1&2 is not defined | Space: object requires documentation | |
43 | ![]() |
<free> | Space: object requires documentation | |
44 | ![]() |
Work process cannot write a system log | Space: object requires documentation | |
45 | ![]() |
Central system log & cannot be read | ||
46 | ![]() |
Invalid time range | Space: object requires documentation | |
47 | ![]() |
Criteria were not coopied | Space: object requires documentation | |
48 | ![]() |
Empty selection list is ignored | Space: object requires documentation | |
49 | ![]() |
Test: & & & & & & & & | ||
50 | ![]() |
The current position cannot be determined for remote system logs | ||
51 | ![]() |
Internal error & & & & & | ||
52 | ![]() |
No valid process type | The short text describes the object sufficiently | |
53 | ![]() |
Process class is not numerical | The short text describes the object sufficiently | |
54 | ![]() |
Class does not exist. 'X' is the default value | Space: object requires documentation | |
55 | ![]() |
Problem class not maintained | Space: object requires documentation | |
56 | ![]() |
Message &1 deleted | The short text describes the object sufficiently | |
57 | ![]() |
System log number must begin with a letter | Space: object requires documentation | |
58 | ![]() |
System log number & & cannot be displayed | Space: object requires documentation | |
59 | ![]() |
The cursor is not positioned in the list | Space: object requires documentation | |
60 | ![]() |
Problem class & is not defined | Space: object requires documentation | |
61 | ![]() |
Data already saved | Space: object requires documentation | |
62 | ![]() |
Data was not saved | Space: object requires documentation | |
63 | ![]() |
Data saved | Space: object requires documentation | |
64 | ![]() |
Invalid system log number | Space: object requires documentation | |
65 | ![]() |
Maximum value is already reached | Space: object requires documentation | |
66 | ![]() |
Minimum value alrady reached | Space: object requires documentation | |
67 | ![]() |
System log message and problem class must be maintained | Space: object requires documentation | |
68 | ![]() |
Specify a system log message | Space: object requires documentation | |
69 | ![]() |
Message &1 deleted with documentation | Space: object requires documentation | |
70 | ![]() |
Maintenance language for the &1 area is already set to &2 | The short text describes the object sufficiently | |
71 | ![]() |
Message area &1 is not permissible for &2 | The short text describes the object sufficiently | |
72 | ![]() |
Only possible to change message in logon language | The short text describes the object sufficiently | |
73 | ![]() |
Only possible to change message in original language | Space: object requires documentation | |
74 | ![]() |
You are not authorized to create messages in area &1 | The short text describes the object sufficiently | |
75 | ![]() |
You are not authorized to delete messages in area &1 | The short text describes the object sufficiently | |
76 | ![]() |
You are not authorized to change messages in area &1 | The short text describes the object sufficiently | |
77 | ![]() |
You are not authorized to display messages in area &1 | The short text describes the object sufficiently | |
78 | ![]() |
System setting does not permit changes to messages in area &1 | The short text describes the object sufficiently | |
79 | ![]() |
Message &1 &2 has already been created | The short text describes the object sufficiently | |
80 | ![]() |
Valid value required in field &1 | The short text describes the object sufficiently | |
81 | ![]() |
Enter the percentage weighting for the severity &1 | The short text describes the object sufficiently | |
82 | ![]() |
Maintain the documentation for the message | The short text describes the object sufficiently | |
83 | ![]() |
Error during transport recording | The short text describes the object sufficiently | |
84 | ![]() |
No data has been changed; saving is not necessary | The short text describes the object sufficiently | |
85 | ![]() |
There are no free audit log messages in message area &1 | The short text describes the object sufficiently | |
86 | ![]() |
There are no free system log messages in message area &1 | The short text describes the object sufficiently | |
87 | ![]() |
No messages exist for the specified selection | The short text describes the object sufficiently | |
88 | ![]() |
Database access error | The short text describes the object sufficiently | |
89 | ![]() |
When changing texts, consider translation and compatibility | Space: object requires documentation | |
90 | ![]() |
Message parameters must not be longer than &1 in total | The short text describes the object sufficiently | |
91 | ![]() |
Do not use placeholders like &1 | The short text describes the object sufficiently | |
92 | ![]() |
Placeholder &1 can only be used once | The short text describes the object sufficiently | |
93 | ![]() |
Length specification for parameters can only be a single digit | Space: object requires documentation | |
94 | ![]() |
starting (1st step) | ||
95 | ![]() |
starting (2nd step) | ||
96 | ![]() |
starting (3rd step) | ||
97 | ![]() |
started | ||
98 | ![]() |
& entries written | ||
99 | ![]() |
& (+&) entries written | ||
100 | ![]() |
Wait for start time | ||
101 | ![]() |
Wait for connection | ||
102 | ![]() |
sending | ||
103 | ![]() |
waiting. & entries sent | ||
104 | ![]() |
waiting after write error (errno=&) | ||
105 | ![]() |
normal end | ||
106 | ![]() |
terminated: reason not known | ||
107 | ![]() |
terminated: cannot open system log file (errno=&) | ||
108 | ![]() |
terminated: file has incorrect format | ||
109 | ![]() |
terminated: file has too many format errors | ||
110 | ![]() |
terminated: read error | ||
111 | ![]() |
terminated: incomplete file | ||
112 | ![]() |
terminated: error at socket() (errno=&) | ||
113 | ![]() |
terminated: error at bind() (errno=&) | ||
114 | ![]() |
terminated: list() error (errno=&) | ||
115 | ![]() |
terminated: connect() error (errno=&) | ||
116 | ![]() |
terminated: start error | ||
117 | ![]() |
terminated in test mode | ||
118 | ![]() |
terminated after signal & | ||
119 | ![]() |
terminated after signals & + & | ||
120 | ![]() |
ended after waiting time too long | ||
121 | ![]() |
terminated: internal promise not kept: & | ||
122 | ![]() |
***** 3xx - System log analysis with SM23 ***** | ||
123 | ![]() |
Unable to open system log file, return code & | Space: object requires documentation | |
124 | ![]() |
Unable to open old system log file, return code & | Space: object requires documentation | |
125 | ![]() |
Error reading system log file. Return code = & | Space: object requires documentation | |
126 | ![]() |
System log file contains records from & & | Space: object requires documentation | |
127 | ![]() |
Choose the system log file version (local/central) | Space: object requires documentation | |
128 | ![]() |
Choose a variant for the analysis | Space: object requires documentation | |
129 | ![]() |
Choose a sort sequence | Space: object requires documentation | |
130 | ![]() |
Chronological analysis, sort sequence ignored | ||
131 | ![]() |
System log archive not installed, RC = & | Space: object requires documentation | |
132 | ![]() |
Error initializing system log archive, table &, return code & | Space: object requires documentation | |
133 | ![]() |
Error updating system log archive, table &, return code & | Space: object requires documentation | |
134 | ![]() |
Begin of records in system log archive | Space: object requires documentation | |
135 | ![]() |
Last entry in system log archive: & | Space: object requires documentation | |
136 | ![]() |
First imported system log entry: & | Space: object requires documentation | |
137 | ![]() |
System log statistics up to & archived | Space: object requires documentation | |
138 | ![]() |
Error initializing system log archive, table &, return code & | Space: object requires documentation | |
139 | ![]() |
********** Messages for SM20 (system audit log) | Space: object requires documentation | |
140 | ![]() |
Choose at least one audit class | Space: object requires documentation | |
141 | ![]() |
Choose at least one security level | Space: object requires documentation | |
142 | ![]() |
Event selection (message filter) reset | Space: object requires documentation | |
143 | ![]() |
Error occurred when determining the active instances | Space: object requires documentation | |
144 | ![]() |
No data was found on the server | Space: object requires documentation | |
145 | ![]() |
The result set for this selection was empty | Space: object requires documentation | |
146 | ![]() |
Longtext for transaction &A: &B | Space: object requires documentation | |
147 | ![]() |
Could not open audit file (does not exist) | Space: object requires documentation | |
148 | ![]() |
Termination due to errors in method &A with returncode &B | Space: object requires documentation | |
149 | ![]() |
Sought user does not exist in system | Space: object requires documentation | |
150 | ![]() |
This layout variant does not exist | Space: object requires documentation |
History
Last changed on/by | ![]() |
20140121 | SAP |
SAP Release Created in |