Hierarchy
SAP_HRCUS (Software Component) Sub component SAP_HRCUS of SAP_HR⤷
PY-US-NT-TX-BSI (Application Component) BSI⤷
PZ1B (Package) HR payroll accounting: BSI tax interface for USA
Basic Data
| Data Element | CC |
| Short Description | BSI: Tax character |
Data Type
| Category of Dictionary Type | D | Domain |
| Type of Object Referenced | No Information | |
| Domain / Name of Reference Type | CHAR1 | |
| Data Type | CHAR | Character String |
| Length | 1 | |
| Decimal Places | 0 | |
| Output Length | 1 | |
| Value Table |
Further Characteristics
| Search Help: Name | ||
| Search Help: Parameters | ||
| Parameter ID | ||
| Default Component name | ||
| Change document | ||
| No Input History | ||
| Basic direction is set to LTR | ||
| No BIDI Filtering |
Field Label
| Length | Field Label | |
| Short | 10 | Tx charac. |
| Medium | 15 | Tax character |
| Long | 20 | Tax character |
| Heading | 3 | TxC |
Supplementary Documentation - CCALC 0010
Use
If you do not set the indicator you can use every change number with alphanumerical characters.
If you set the indicator you can only use a change number with with alphanumerical characters if the number is within a number range defined in Customizing.
You define number ranges in the following section: Engineering Change Management -> Define Number Ranges.
Supplementary Documentation - CCA_FRMPCF0003
Definition
Value entry field for the plan cost column (fixed) of the template (costs of a cost element).
Go to the quantity editor to enter the quantity formula.
Use
Procedure
Examples
Dependencies
Supplementary Documentation - CCA_FRMPCV0003
Definition
Value entry field for the plan cost column (variable) of the template (costs of a cost element).
You can branch out into the quantity editor to enter a quantity formula.
Use
Procedure
Examples
Dependencies
Supplementary Documentation - CCDOK_EINH0010
Use
Procedure
Set this indicator if you want to archive the change master records that are created with the leading change master record function.
Examples
Dependencies
Supplementary Documentation - CCDOK_MIFR0010
Use
Procedure
Enter this indicator if you want to archive change master records, that were created with the function With release key.
Examples
Dependencies
Supplementary Documentation - CCDOK_OHFR0010
Use
Procedure
Set this indicator if you want to archive the change master records that have been created with the without release key function.
Examples
Dependencies
Supplementary Documentation - CCDOK_PAKT0010
Use
Procedure
Enter this indicator if you want to archive change master records, that were created with the function Change package.
Examples
Dependencies
Supplementary Documentation - CCIHE_ACDESCLXT0002
Use
The description of how the accident happened can be transferred to forms, for example, to the accident report (field 37).
Note: Only a limited number of lines can be output on the forms, for example, nine lines in the accident report (field 37).
Supplementary Documentation - CCIHE_ACLOC0002
Dependencies
Prerequisite for specifying an accident location is that you have defined accident locations for the respective work area.
Supplementary Documentation - CCIHE_ACLOCDESC0001
Use
The description of the scene of the accident can be transferred to forms, for example, to the accident report (field 31).
Note: Only a limited number of lines can be output on the forms.
Dependencies
If you already selected the scene of the accident, the input field has the description preset. You can add to this text as required.
Supplementary Documentation - CCIHE_ACLOCDESC0002
Use
Procedure
Examples
Dependencies
If you already selected the scene of the accident, the input field has the description preset. You can add to this text as required.
Supplementary Documentation - CCIHE_ANLAB0000
Use
Specifies who analyses the sample. This could be a laboratory, for example.
Dependencies
The value originates from Customizing for the measurement method.
Supplementary Documentation - CCIHE_ANLAB0001
Dependencies
The system displays the value from Customizing for the measurement procedure.
Supplementary Documentation - CCIHE_AVLTTYPE0001
General Notes on the Measured/Reference Value Tab
You do not enter the measured and reference values manually, but choose from existing data records. The system obtains the data records from:
- The amounts that you have entered for the agent (measured values)
- Specification management (reference values)
You can have the system calculate the rating or assign it manually. The system uses the user exit ANLS_RATCP to calculate the rating.
To make a measured value-reference value comparison, proceed as follows:
- In the lower part of the Measured/Reference Value tab choose Insert line.
The Find Measurements for Exposure Assignment dialog box appears.
- Enter your search parameters and choose Execute.
A hit list of the measurements found appears.
- Choose the measurement you want to see and confirm your entries.
- The system determines the corresponding reference value in the background and places it beside the measured value.
- Choose Calculate rating to let the system calculate the rating or enter the rating using the input help.
Supplementary Documentation - CCIHE_BUILDING0001
Use
Dependencies
If the work area for which you have created the measurement project has a building as an integration object, for which the Main Building indicator is set, this is shown in the measurement project.
Example
Supplementary Documentation - CCIHE_EPQUANTTYPE0001
General Notes on the Measured/Reference Value Tab
You do not enter the measured and reference values manually, but choose from existing data records. The system obtains the data records from:
- The amounts that you have entered for the agent (measured values)
- Specification management (reference values)
You can have the system calculate the rating or assign it manually. The system uses the user exit ANLS_RATCP to calculate the rating.
To make a measured value-reference value comparison, proceed as follows:
- In the lower part of the Measured/Reference Value tab choose Insert line.
The Find Measurements for Exposure Assignment dialog box appears.
- Enter your search parameters and choose Execute.
A hit list of the measurements found appears.
- Choose the measurement you want to see and confirm your entries.
- The system determines the corresponding reference value in the background and places it beside the measured value.
- Choose Calculate rating to let the system calculate the rating or enter the rating using the input help.
Supplementary Documentation - CCIHE_EPQUNITNAM0001
General Notes on the Measured/Reference Value Tab
You do not enter the measured and reference values manually, but choose from existing data records. The system obtains the data records from:
- The amounts that you have entered for the agent (measured values)
- Specification management (reference values)
You can have the system calculate the rating or assign it manually. The system uses the user exit ANLS_RATCP to calculate the rating.
To make a measured value-reference value comparison, proceed as follows:
- In the lower part of the Measured/Reference Value tab choose Insert line.
The Find Measurements for Exposure Assignment dialog box appears.
- Enter your search parameters and choose Execute.
A hit list of the measurements found appears.
- Choose the measurement you want to see and confirm your entries.
- The system determines the corresponding reference value in the background and places it beside the measured value.
- Choose Calculate rating to let the system calculate the rating or enter the rating using the input help.
Supplementary Documentation - CCIHE_EPVAL0000
Use
You can give an estimated assessment of the exposure.
Supplementary Documentation - CCIHE_EVDAT0001
Procedure
Enter the date of the event.
Supplementary Documentation - CCIHE_EXTNOTELXT0001
Use
You can store notes in the form of user-defined text that can be shown to external bodies as required, for example, the trade supervisory authority or the workers' compensation association.
Supplementary Documentation - CCIHE_FRTRMT0001
Use
The name and address of the doctor or hospital can be transferred to
forms, for example, to the accident report (field 25).
Procedure
Enter the business partner.
Supplementary Documentation - CCIHE_FRTRMT0002
Procedure
Enter the Business partner.
Supplementary Documentation - CCIHE_FULLNAME0001
Use
In the case of internal persons, the name consists of the first and last name.
For business partners, the system can display the name of an organisation as well as the name of a person.
Supplementary Documentation - CCIHE_HQVCHAR120000
General Notes on the Measured/Reference Value Tab
You do not enter the measured and reference values manually, but choose from existing data records. The system obtains the data records from:
- The amounts that you have entered for the agent (measured values)
- Specification management (reference values)
You can have the system calculate the rating or assign it manually. The system uses the user exit ANLS_RATCP to calculate the rating.
To make a measured value-reference value comparison, proceed as follows:
- In the lower part of the Measured/Reference Value tab choose Insert line.
The Find Measurements for Exposure Assignment dialog box appears.
- Enter your search parameters and choose Execute.
A hit list of the measurements found appears.
- Choose the measurement you want to see and confirm your entries.
- The system determines the corresponding reference value in the background and places it beside the measured value.
- Choose Calculate rating to let the system calculate the rating or enter the rating using the input help.
Supplementary Documentation - CCIHE_IALID0000
Supplementary Documentation - CCIHE_IATYPE0001
Use
The data on the type of log entry can be used for evaluation at a later date.
Example
Some examples of possible entry types are:
- Event involving a number of persons
- Event involving no injuries to persons
- Event involving one person
Supplementary Documentation - CCIHE_IPABSBEGDAT0001
Dependencies
If the person affected is an employee, as a result of the integration in the SAP component Personnel Time Management you can create an absence in Personnel Time Management or assign an existing absence and change it if necessary. Integration is not possible for external persons affected.
Requirements
You have authorization to edit absences in Personnel Time Management.
Procedure
Choose Create HR absence or Change HR absence. For external persons affected the pushbuttons named above are not displayed.
Supplementary Documentation - CCIHE_IPABSENDDAT0001
Dependencies
If the person affected is an employee, as a result of the integration in the SAP component Personnel Time Management you can create an absence in Personnel Time Management or assign an existing absence and change it if necessary. Integration is not possible for external persons affected.
Requirements
You have authorization to edit absences in Personnel Time Management.
Procedure
Choose Create HR absence or Change HR absence. For external persons affected the pushbuttons named above are not displayed.
Supplementary Documentation - CCIHE_IPPERS0002
Procedure
Enter the person that received treatment (for example, medication, bandaging of wounds).
Dependencies
The person is automatically entered in the injury/illness log as person affected.
Supplementary Documentation - CCIHE_IPPERS0003
Definition
Identifies a person or contact person.
Supplementary Documentation - CCIHE_IPPFLAG0001
Use
If you set the indicator, you can enter only an external person as a relevant witness.
Supplementary Documentation - CCIHE_IPPFLAG0002
Use
If you set the indicator, external persons are also taken into account during the search.
Supplementary Documentation - CCIHE_LIMLOW0001
Dependencies
The rating is calculated by the user exit category ANLS_QSRAT. This category is assigned the reference function module CBIH_LB33_UE_RATING_COMP. If you adapt its determination routine, the threshold value can be given another meaning.
Supplementary Documentation - CCIHE_LIMLOW0002
Dependencies
The threshold value is evaluated when ratings are calculated for the analysis methods measured value-reference value comparison and summated rating.
Supplementary Documentation - CCIHE_LTTYPE0001
General Notes on the Measured/Reference Value Tab
You do not enter the measured and reference values manually, but choose from existing data records. The system obtains the data records from:
- The amounts that you have entered for the agent (measured values)
- Specification management (reference values)
You can have the system calculate the rating or assign it manually. The system uses the user exit ANLS_RATCP to calculate the rating.
To make a measured value-reference value comparison, proceed as follows:
- In the lower part of the Measured/Reference Value tab choose Insert line.
The Find Measurements for Exposure Assignment dialog box appears.
- Enter your search parameters and choose Execute.
A hit list of the measurements found appears.
- Choose the measurement you want to see and confirm your entries.
- The system determines the corresponding reference value in the background and places it beside the measured value.
- Choose Calculate rating to let the system calculate the rating or enter the rating using the input help.
Supplementary Documentation - CCIHE_MAININJFLG0001
Use
If you set this indicator, the search takes into account injuries that are marked as main injuries.
Supplementary Documentation - CCIHE_MAXAVLTTYPE0001
General Notes on the Measured/Reference Value Tab
You do not enter the measured and reference values manually, but choose from existing data records. The system obtains the data records from:
- The amounts that you have entered for the agent (measured values)
- Specification management (reference values)
You can have the system calculate the rating or assign it manually. The system uses the user exit ANLS_RATCP to calculate the rating.
To make a measured value-reference value comparison, proceed as follows:
- In the lower part of the Measured/Reference Value tab choose Insert line.
The Find Measurements for Exposure Assignment dialog box appears.
- Enter your search parameters and choose Execute.
A hit list of the measurements found appears.
- Choose the measurement you want to see and confirm your entries.
- The system determines the corresponding reference value in the background and places it beside the measured value.
- Choose Calculate rating to let the system calculate the rating or enter the rating using the input help.
Supplementary Documentation - CCIHE_MAXLTTYPE0001
General Notes on the Measured/Reference Value Tab
You do not enter the measured and reference values manually, but choose from existing data records. The system obtains the data records from:
- The amounts that you have entered for the agent (measured values)
- Specification management (reference values)
You can have the system calculate the rating or assign it manually. The system uses the user exit ANLS_RATCP to calculate the rating.
To make a measured value-reference value comparison, proceed as follows:
- In the lower part of the Measured/Reference Value tab choose Insert line.
The Find Measurements for Exposure Assignment dialog box appears.
- Enter your search parameters and choose Execute.
A hit list of the measurements found appears.
- Choose the measurement you want to see and confirm your entries.
- The system determines the corresponding reference value in the background and places it beside the measured value.
- Choose Calculate rating to let the system calculate the rating or enter the rating using the input help.
Supplementary Documentation - CCIHE_MJCAT0001
Dependencies
You can change the value as long as the measurement has the status "Created."
Supplementary Documentation - CCIHE_MJNOTE0001
Use
Here you can enter a reason, for example, if the measurement was not performed.
Supplementary Documentation - CCIHE_MPCOSTAC0001
Use
Your entry relates to the plant to which the site belongs. You can therefore only enter cost centers that are assigned to the respective plant. The input help shows you the possible cost centers.
Dependencies
You can change the value as long as the measurement has the status "Created."
Supplementary Documentation - CCIHE_MPWANOTE0001
Use
The text is displayed in the log sheet.
Supplementary Documentation - CCIHE_MSRENDDATE0001
General Notes on the Measured/Reference Value Tab
You do not enter the measured and reference values manually, but choose from existing data records. The system obtains the data records from:
- The amounts that you have entered for the agent (measured values)
- Specification management (reference values)
You can have the system calculate the rating or assign it manually. The system uses the user exit ANLS_RATCP to calculate the rating.
To make a measured value-reference value comparison, proceed as follows:
- In the lower part of the Measured/Reference Value tab choose Insert line.
The Find Measurements for Exposure Assignment dialog box appears.
- Enter your search parameters and choose Execute.
A hit list of the measurements found appears.
- Choose the measurement you want to see and confirm your entries.
- The system determines the corresponding reference value in the background and places it beside the measured value.
- Choose Calculate rating to let the system calculate the rating or enter the rating using the input help.
Supplementary Documentation - CCIHE_PERSFLAG_APP0001
Use
If you set the indicator, applicants are also taken into account during the search.
Supplementary Documentation - CCIHE_QSCONCATKEY0001
Procedure
To assign a questionnaire to the work area, proceed as follows:
- Choose New questionnaire.
The Questionnaire Assignment: Change screen appears.
- Specify from which general questionnaires your specific questionnaire is to be created and save your entry.
When you exit the screen, a dialog box appears.
- Enter the description of the questionnaire and confirm.
The questionnaire is created and assigned to the work area. The key for the questionnaire is assigned by the system. You can now specify the operation status and the date of questioning.
If you want to use a questionnaire that is already assigned for another operation status, execute the following steps:
- Transfer the questionnaire key to a new line in the list by copying it.
- Assign the required operation status and save.
Use
In work area management/pattern management
You can answer, close, print out, and delete the specific questionnaire. Once you close the questionnaire, you can no longer edit the answers.
In risk assessment
Once you close the specific questionnaire in work area management, you can use the questionnaire within a risk assessment as an analysis method. Here you can only display the questionnaire and not edit it.
Dependencies
If you use the specific questionnaire in a risk assessment, you can no longer delete it in work area management.
You can use the analysis method questionnaire only for agent types to which the analysis method questionnaire was assigned in Customizing for risk assessment.
Supplementary Documentation - CCIHE_RATING0001
Dependencies
If you assign the rating to a rating category in Customizing, you can use the same rating in different contexts and also output context-sensitive descriptions.
For example, you can make the setting that a rating A in the exposure profile is used with the description Hazard level 1, but is used in the risk analysis for the measured value-reference value comparison with the description Reference value exceeded.
Supplementary Documentation - CCIHE_RATING0002
General Notes on the Measured/Reference Value Tab
You do not enter the measured and reference values manually, but choose from existing data records. The system obtains the data records from:
- The amounts that you have entered for the agent (measured values)
- Specification management (reference values)
You can have the system calculate the rating or assign it manually. The system uses the user exit ANLS_RATCP to calculate the rating.
To make a measured value-reference value comparison, proceed as follows:
- In the lower part of the Measured/Reference Value tab choose Insert line.
The Find Measurements for Exposure Assignment dialog box appears.
- Enter your search parameters and choose Execute.
A hit list of the measurements found appears.
- Choose the measurement you want to see and confirm your entries.
- The system determines the corresponding reference value in the background and places it beside the measured value.
- Choose Calculate rating to let the system calculate the rating or enter the rating using the input help.
Supplementary Documentation - CCIHE_RATING0004
Dependencies
The calculation is based on a user exit. This user exit belongs to the user exit category ANLS_SRTCP with the reference function module CBIH_LB42_UE_SRTCP_COMP.
Supplementary Documentation - CCIHE_RATING0010
Dependencies
If you execute the Assessment matchup function, the rating is matched up with the Value assignment after check from the corresponding risk assessment. If the value assignment after check does not exist, the main rating is used for the matchup.
Supplementary Documentation - CCIHE_SAMPLENR0001
Dependencies
You can change the value as long as the measurement has the status "Created" or "Analysis job created."
Supplementary Documentation - CCIHE_SETNUMBER0001
General Notes on the Measured/Reference Value Tab
You do not enter the measured and reference values manually, but choose from existing data records. The system obtains the data records from:
- The amounts that you have entered for the agent (measured values)
- Specification management (reference values)
You can have the system calculate the rating or assign it manually. The system uses the user exit ANLS_RATCP to calculate the rating.
To make a measured value-reference value comparison, proceed as follows:
- In the lower part of the Measured/Reference Value tab choose Insert line.
The Find Measurements for Exposure Assignment dialog box appears.
- Enter your search parameters and choose Execute.
A hit list of the measurements found appears.
- Choose the measurement you want to see and confirm your entries.
- The system determines the corresponding reference value in the background and places it beside the measured value.
- Choose Calculate rating to let the system calculate the rating or enter the rating using the input help.
Supplementary Documentation - CCIHE_STMFLG0000
Dependencies
The system sets the indicator automatically if it was set in Customizing for Industrial Hygiene and Safety when the measurement method was set up. This then indicates that the measurement method is suitable for a short-term sample. You can change the value as long as the measurement has the status "Created."
Supplementary Documentation - CCIHE_WAAUTHGRP0001
Dependencies
The authorization group is a field in the authorization object C_EHSI_WAH. C_EHSI_WAH is used to check whether a user has authorization to display and edit a work area or a pattern.
Supplementary Documentation - CCIHE_WACOORD0001
Use
Procedure
Examples
Dependencies
Supplementary Documentation - CCIHE_WAID0000
Supplementary Documentation - CCIHE_WAID0001
Use
You can assign a higher-level work area to the work area you want to create by defining hierarchical relationships. If you do this, the system uses the work area type to check whether the assignment is permitted.
Procedure
Enter the key for the higher-level work area or choose an entry using the search help.
Note
You can display a graphic of the current status of hierarchical relationships in the ZH>work area structure.
Supplementary Documentation - CCIHE_WAID0002
Use
Procedure
Examples
Dependencies
Supplementary Documentation - CCIHE_WAID0009
Supplementary Documentation - CCIHE_WAID0097
Procedure
Enter the work area where the event took place.
Supplementary Documentation - CCIHE_WAID0098
Procedure
Enter the work area where the accident happened.
Supplementary Documentation - CCIHE_WAID7777
Use
Patterns are special work areas without reference to a place or organization that allow you to create standardized exposure profiles and risk assessments for frequently occurring activities and work areas.
You can assign any number of "real" work areas to patterns and vice versa. By means of this assignment, the exposure profile entries and dependent risk assessments of the patterns are transferred to the work areas as a reference, thus minimizing data entry time and effort.
As the data in patterns is transferred only as a reference and not as a copy, any subsequent changes made to the patterns are automatically passed on to the assigned work areas. You can, however, delete the reference. This removes the link to the pattern and you can copy the data to your local exposure profile.
Notes
- Patterns cannot have versions assigned.
- If you assign patterns that contain exposure profile entries for the same agent, the exposure profile entry of the lowest (selected) pattern in the hit list is transferred.
- Using collective patterns you can group a number of individual patterns together into one unit.
Supplementary Documentation - CCIHE_WANAM0000
Use
You can use the description as a search criterion. The system searches through the descriptions of the logon language in question.
Supplementary Documentation - CCIHE_WANAM0001
Procedure
Enter the name of the work area in your logon language.
Supplementary Documentation - CCIHE_WASPID0001
Use
If you use the higher-level work area as a search criterion, all work areas are taken into account that are positioned in the work area hierarchy immediately below the top-level work area.
Note: Hierarchy relationships can be specified for work areas only.
Supplementary Documentation - CCIHE_WATYPE0066
Use
Procedure
Examples
Dependencies
Supplementary Documentation - CCIHE_WEIGHTING0001
Definition
The weighting is required to calculate the mean value.
Supplementary Documentation - CCIHE_WEIGHTING0002
Definition
Ti is the time portion of an individual noise measurement to determine the assessment level.
Supplementary Documentation - CCMEH 0001
Use
- Master data
Consumption quantities for the cost element should be recorded in this consumption unit or one convertible to this consumption unit.
You can change the cost element master data only if the cost element has not been assigned or planned.
- Planning
In planning you can change the unit to a convertible unit on the cost element/cost center level. You can enter any unit when planning for the first time, provided no consumption unit is defined in the cost element master.
Dependencies
- If no consumption unit is defined in the cost element master and different quantity units were determined for cost center/cost element, quantity recording in actual/plan distribution is not possible.
- In Product Cost Controlling, you may have to carry out quantity controlling for important materials although materials with different quantity units are recorded under the same cost element. You can thus record these materials in CO individually, not on the cost element level. If this is the case, the material unit and not the cost element is updated in costing and in actual.
Note
Field changes
You can change this field for each fiscal year. For example, you can change the field content for a new fiscal year.
Time dependency
The data in this field is always time-based.
Supplementary Documentation - CCOAA 4210
Definition
change type that must be specified for recipe maintenance in the change order.
Use
By entering a change type, you subject the recipe maintenance to a user- defined authorization process and a specific workflow. The recipe can then only be changed with change orders in which this change type is allocated to the object managemnent record for recipe maintenance.
In the following table you can see which objects are affected by which changes:
Recipe data to be maintained Affected Objects
Material list, Task list/master recipe, BOM
Material quantity calculation.
and BOM
All other recipe data Task list/master recipe
Dependencies
- The change type entered here is only taken into account if you choose the change rule With change order and change type at the same time.
- When the change type has already been assigned in the recipe profile you cannot chnage it in the recipe header
- You cannot chnage the change type of the profile from recipe processing
Supplementary Documentation - CCTRS 0001
Use
If you select this indicator, the following customizing settings are activated or deactivated in the correction:
- Cost centers (CSKS, CSKT, ONRKS, ONR00)
The function transports both complete and rough-entry cost centers.
Procedure
- To include the settings in the correction request number specified, choose Include in Correction.
- To remove the settings from the correction request, choose Delete from Correction.
In both cases the system may display a screen on which you can restrict your selection of entries to be transported (by controlling area or chart of accounts, for example).
Dependencies
The following objects are logically related and should therefore always be transported together:
- Cost centers (CSKS, CSKT, ONRKS, ONR00)
- Standard hierarchy (sets)
This dependency does not apply to rough-entry cost centers.
Supplementary Documentation - CCYCL 0001
Select option TABKEY
Personnel calculation rule.
Use
Please specify an interval.
Supplementary Documentation - CCYCL 0002
Use
This enables you to determine which personnel calculation rules are exploded. Such restrictions are a useful way of minimizing the length of the report displayed.
Examples
Let us assume that your personnel calculation rules start with Z. By entering Z*, you can ensure that personnel calculation rules are only exploded if they start with Z.
Dependencies
This choice is only relevant if you need to explode personnel calculation rules.
Supplementary Documentation - CCYCL 0003
Use
During special processing, you are able to access temporary information calculated by the system, for example, information on leave deduction, or period related calculations. The system places the calculated values in record bed fields.
Information on record bed fields can be found in the documentation for the operands of the NUM, RTE and AMT operations.
Procedure
In this field, enter the name of the personnel calculation rule that you have set up to map special processing based on the employee grouping for absence valuation and the absence valuation rule.
Examples
Dependencies
Special processing is only necessary if the standard options for absence valuation are not sufficient.
Supplementary Documentation - CC_AEFRF 0000
Use
Procedure
Select this indicator if you want to display a change status that is released for production via the release key.
Examples
Dependencies
Supplementary Documentation - CC_AEFRK 0000
Use
Procedure
Select this indicator if you want to display a change status that is released for costing via the release key.
Examples
Dependencies
Supplementary Documentation - CC_AEFRP 0000
Use
Procedure
Select this indicator if you want to display a change status that is released for planning via the release key.
Examples
Dependencies
Supplementary Documentation - CC_LOEKZ 1000
Use
Procedure
If you have selected change master records, but only want those with a deletion flag to be deleted, set this indicator.
Examples
Dependencies
Supplementary Documentation - CC_PROF 0010
Use
You use a client-wide effectivity profile if you only want to allow certain effectivity types for creating change master records and for parameter value assignments in a client.
Dependencies
You define effectivity profiles in Customizing for engineering change management in the Parameter effectivity -> Maintain effectivity profiles step.
Example
In a client you only work with the CUSTOMER effectivity type. However, in your system you have the additional effectivity types SERNO (serial number) and DATE (date interval).
In Customizing you create a client-wide effectivity profile that only contains the CUSTOMER effectivity type. This has the following effect:
- When you create a change master record with parameter effectivity, you can only select the CUSTOMER effectivity type.
- When you assign values to the effectivity parameters, only those effectivity parameters are displayed that are assigned to the CUSTOMER effectivity type.
Supplementary Documentation - CC_PROF 0020
Use
You create a material-specific effectivity profile if only those effectivity parameters should be displayed, when you assign values to the effectivity parameters for a certain material, that are relevant for that particular material.
Dependencies
You define effectivity profiles in Customizing for engineering change management in the Parameter effectivity -> Maintain effectivity profiles step.
Example
You process material P100 and the related bills of material and routings with the CUSTOMER effectivity type only. Therefore, you want the MATNO (material) and SERNO (serial number) effectivity paramaters that are assigned to the SERNO effectivity type, and also the DATE effectivity parameter to be hidden when you assign values to the effectivity parameters for P100 in the Assign Parameter Effectivity Values dialog box.
You create an effectivity profile for your material, that only contains the CUSTOMER effectivity type. If the Assign Parameter Effectivity Values dialog box is later displayed, only those effectivity oarameters will be shown, that are assigned to the CUSTOMER effectivity type.
Supplementary Documentation - CC_PROFIL 0001
Use
Procedure
Examples
Dependencies
A profile that should be used to create change master records with the Leading change master record function needs no object type profile.
Supplementary Documentation - CC_RL_LOCK0001
Use
Procedure
Set this indicator if you want a change master record that has been released globally to remain unchangeable.
Examples
Dependencies
The system checks whether the Global release indicator is set for the release key of the change master record.
Supplementary Documentation - CC_RL_LOCK0002
Use
Set this indicator if you want a change master record that has been released for costing to remain unchaged.
Examples
Dependencies
Procedure
Examples
Dependencies
The system checks whether the Release for costing indicator has been set for the release key of the change master record.
Supplementary Documentation - CC_RL_LOCK0003
Use
Set this indicator if you want a change master record that has been released for planning to remain unchanged.
Examples
Dependencies
The system checks whether the Release for planning indicator has been set for the release key of the change master record.
Supplementary Documentation - CC_RL_LOCK0004
Use
Set this indicator if you want a change master record that has been released for production to remain unchanged.
Examples
Dependencies
The system checks whether the Release for production indicator has been set for the release key of the change master record.
Supplementary Documentation - CC_STTXT 0010
Use
The abbreviations for the previous statuses are shown in sequence from left to right in the line. The current status is on the right.
Procedure
If you want to:
- set a new user status, choose the Status pushbutton. On the Change status detail screen, choose menu option Edit function Set user status.
- display the description of the status, choose the Status pushbutton.
Note:
From the Status detail screen, you can display an overview of both system statuses and user statuses. To do this, choose menu option Extras -> Overview. - uses a system status to show which business transaction has been done using the change master record, choose menu option Edit -> Change status and select the business transaction. The system sets the appropriate system status.
Note:
If you want to see an overview of the "allowed" and "disallowed" business transaction at the current stage in processing, starting from the Status detail screen , choose menu option Extras -> Business transactions.
Examples
When you create a change master record and choose a status type, the system automatically sets the status (opened).
Dependencies
You cannot change which business transaction leads to a specific system status, as this is defined internally.
Supplementary Documentation - CC_STTXT 0015
Use
The abbreviations for the previous statuses are shown in sequence from left to right in the line. The current status is on the right.
Procedure
If you want to:
- Display the description of the status, choose Status .
Note:
From the Status detail screen, you can display an overview of both system statuses and user statuses. To do this, choose menu option Extras -> General overview. - Use a system status to show which business transaction has been executed using the change master record, choose menu option Edit -> Object status and select the business transaction. The system sets the appropriate system status.
Note:
If you want to see an overview of the "allowed" and "disallowed" business transaction at the current stage in processing, starting from the Status detail screen , choose menu option Extras -> Business transactions.
Dependencies
You cannot change which business transaction leads to a specific system status, as this is defined internally.
Supplementary Documentation - CC_TEREL 0000
Use
The technical release of all change packages is required if you want to release a superior leading change master record using the release key for the following:
- Global release
- Release for production
Procedure
Check whether the package should be released for this processing stage. Once you have released the package technically you can no longer undo this release.
If you want to technically release the change package, choose the following function: Edit -> Technical release.
The system automatically sets the Technical release indicator.
Examples
Dependencies
You can only edit the objects (for example, bill of material) with reference to a package that is technically not released.
Supplementary Documentation - CC_TEREL 0001
Use
The technical release of a leading change master record is required if you want to release the leading change master record using the release key for the following:
- Global release
- Release for production
Procedure
Check whether
- The leading change master should be released for this processing stage.
Once you have released it technically you can no longer undo this release.
If you want to technically release the leading change master, choose the following function: Edit -> Technical release.
The system automatically sets the Technical release indicator.
Examples
Dependencies
In exceptional situations you can also release a leading change master record for production, in spite of not all allocated change packages being released technically.
This is possible if you set the Late package allowed indicator in the Set up control data step in Customizing.
History
| Last changed by/on | SAP | 19980325 |
| SAP Release Created in |
