Data Element list used by SAP ABAP Table MRTRSS_PLMK (RMS-MRTRS : Inspection Plan Characteristics)
SAP ABAP Table
MRTRSS_PLMK (RMS-MRTRS : Inspection Plan Characteristics) is using
# | Object Type | Object Name | Object Description | Note |
---|---|---|---|---|
![]() |
![]() |
|||
1 | ![]() |
AENNR | Change Number | |
2 | ![]() |
ANDAT | Date Record Created on | |
3 | ![]() |
ANNAM | User Who Created Record | |
4 | ![]() |
ATBEZ | Characteristic description | |
5 | ![]() |
ATINN | Internal characteristic | |
6 | ![]() |
CIM_COUNT | Internal counter | |
7 | ![]() |
DATUB | Valid-to date | |
8 | ![]() |
DATUV | Valid-From Date | |
9 | ![]() |
FLGSEL | Version is valid on key date entered | |
10 | ![]() |
LKENZ | Deletion Indicator | |
11 | ![]() |
MANDT | Client | |
12 | ![]() |
MW_ENTRY | Dependent Charac. Specs Available for Characteristic | |
13 | ![]() |
PARKZ | Indicator: inactive changes | |
14 | ![]() |
PLNAL | Group Counter | |
15 | ![]() |
PLNKN | Number of the task list node | |
16 | ![]() |
PLNNR | Key for Task List Group | |
17 | ![]() |
PLNTY | Task List Type | |
18 | ![]() |
QAENDERER | Name of User who Most Recently Changed the Data Record | |
19 | ![]() |
QATNAM | Name of the Class Characteristic | |
20 | ![]() |
QCGRAUSW | Assigned Code Group or Selected Set | |
21 | ![]() |
QCGRAUSW | Assigned Code Group or Selected Set | |
22 | ![]() |
QCGRAUSW | Assigned Code Group or Selected Set | |
23 | ![]() |
QCGRAUSW | Assigned Code Group or Selected Set | |
24 | ![]() |
QCGRAUSW | Assigned Code Group or Selected Set | |
25 | ![]() |
QCHARACT_ID1 | Characteristic Description for Quality Data Exchange | |
26 | ![]() |
QCODEGRPO | Defect Code Group for Rejection at Upper Tolerance | |
27 | ![]() |
QCODEGRPQL | Defect Code Group for General Rejection | |
28 | ![]() |
QCODEGRPU | Defect Code Group for Rejection at Lower Tolerance | |
29 | ![]() |
QCODEO | Defect Code for Rejection at Upper Specification Limit | |
30 | ![]() |
QCODEQL | Defect Code for Rejection: General | |
31 | ![]() |
QCODEU | Defect Code for Rejection at Lower Specification Limit | |
32 | ![]() |
QDATUMAEND | Date on Which Data Record Was Changed | |
33 | ![]() |
QDYNREGEL | Dynamic Modification Rule | |
34 | ![]() |
QDYNSTRING | String for Dynamic Modification Criteria (Database Relevant) | |
35 | ![]() |
QEANTVERF | Fraction Calculation | |
36 | ![]() |
QERGDATHPL | Planned Results Data Origin | |
37 | ![]() |
QFORMEL | Formula Field | |
38 | ![]() |
QFORMEL | Formula Field | |
39 | ![]() |
QFORMELSL | Check and Calculate Formula in QM | |
40 | ![]() |
QGRENZOB1 | First Upper Specification Limit | |
41 | ![]() |
QGRENZOB2 | Second Upper Specification Limit | |
42 | ![]() |
QGRENZUN1 | First Lower Specification Limit | |
43 | ![]() |
QGRENZUN2 | Second Lower Specification Limit | |
44 | ![]() |
QINPPROC | Parameters for Input Processing in QM Results Recording | |
45 | ![]() |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
46 | ![]() |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
47 | ![]() |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
48 | ![]() |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
49 | ![]() |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
50 | ![]() |
QKLASSBR | Class Width | |
51 | ![]() |
QKLASSMIT | Class Midpoint | |
52 | ![]() |
QKLASSZAHL | Number of Value Classes for Inspection Results | |
53 | ![]() |
QKTTAB | Catalog Entry Is a Selected Set | |
54 | ![]() |
QKTTAB | Catalog Entry Is a Selected Set | |
55 | ![]() |
QKTTAB | Catalog Entry Is a Selected Set | |
56 | ![]() |
QKTTAB | Catalog Entry Is a Selected Set | |
57 | ![]() |
QKTTAB | Catalog Entry Is a Selected Set | |
58 | ![]() |
QKURZTEXT | Short Text | |
59 | ![]() |
QKZEINSTMK | Characteristic Type | |
60 | ![]() |
QKZPRZIEH | Physical-Sample-Drawing Text Exists | |
61 | ![]() |
QKZQULMK | Qualitative Characteristic | |
62 | ![]() |
QKZQUNMK | Quantitative Characteristic | |
63 | ![]() |
QKZUMFS | Multiple Samples | |
64 | ![]() |
QKZ_REF | Reference to Master Insp. Characteristic in Task List | |
65 | ![]() |
QLTEXTKZ | Inspection Characteristic Long Text Exists | |
66 | ![]() |
QMASSEH | Unit of Measurement, in Which Quantitative Data Is Stored | |
67 | ![]() |
QMERKDYN | Characteristic (in Plan) whose Q-Level Will Be Copied | |
68 | ![]() |
QMERKGEW | Weighting of the Characteristic | |
69 | ![]() |
QMERKNR | Master Inspection Characteristics | |
70 | ![]() |
QMERKNRP | Inspection Characteristic Number | |
71 | ![]() |
QMIP_CHAORIG_ID | Original Identification for Characteristic | |
72 | ![]() |
QMKCONTROL | Cntrl Indicator String for Insp. Char./Master Insp. Char. | |
73 | ![]() |
QNINITIAL | Value Not Initial if Set | |
74 | ![]() |
QNINITIAL | Value Not Initial if Set | |
75 | ![]() |
QNINITIAL | Value Not Initial if Set | |
76 | ![]() |
QNINITIAL | Value Not Initial if Set | |
77 | ![]() |
QNINITIAL | Value Not Initial if Set | |
78 | ![]() |
QNINITIAL | Value Not Initial if Set | |
79 | ![]() |
QNINITIAL | Value Not Initial if Set | |
80 | ![]() |
QNINITIAL | Value Not Initial if Set | |
81 | ![]() |
QNINITIAL | Value Not Initial if Set | |
82 | ![]() |
QNINITIAL | Value Not Initial if Set | |
83 | ![]() |
QNINITIAL | Value Not Initial if Set | |
84 | ![]() |
QNINITIAL | Value Not Initial if Set | |
85 | ![]() |
QNINITIAL | Value Not Initial if Set | |
86 | ![]() |
QPLAUSIOB | Upper Plausibility Limit | |
87 | ![]() |
QPLAUSIUN | Lower Plausibility Limit | |
88 | ![]() |
QPMETHODE | Inspection Method | |
89 | ![]() |
QPROBEFAK | Sample Quantity Factor for Sample(Mult. Sample Unit of Msr.) | |
90 | ![]() |
QPROBEPL | Partial Sample No. for Inspection Charac. in Task List | |
91 | ![]() |
QPROBME | Sample Unit of Measure | |
92 | ![]() |
QPRQUALIF | Inspector Qualification | |
93 | ![]() |
QPZLFH | Assigned Test Equipment | |
94 | ![]() |
QP_CHAORIG | Inspection Characteristic Origin | |
95 | ![]() |
QP_CHAORIG_GUID | Reference to Characteristic That Was Adopted | |
96 | ![]() |
QP_CTRMETH | Control Method | |
97 | ![]() |
QP_NO_INSPECTION | Do Not Copy Inspection Characteristic to Inspection Lot | |
98 | ![]() |
QP_RESPLAN | Response Plan | |
99 | ![]() |
QSOLLWERTE | Target Value for a Quantitative Characteristic | |
100 | ![]() |
QSPCKRIT | SPC Criterion | |
101 | ![]() |
QSTELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
102 | ![]() |
QSTEUERKZ | Key Containing Preset Characteristic Control Indicators | |
103 | ![]() |
QSTICHVERF | Sampling Procedure in Inspection Characteristic | |
104 | ![]() |
QTOLERANZ | Tolerance Key | |
105 | ![]() |
QTOLOB | Upper Specification Limit | |
106 | ![]() |
QTOLUN | Lower Tolerance Limit | |
107 | ![]() |
QTOLWAB | Date from Which the Tolerance Change Is Valid | |
108 | ![]() |
QTOLWBIS | Date Until Which the Tolerance Change Is Valid | |
109 | ![]() |
QTOLWOB | Change to Upper Specification Limit | |
110 | ![]() |
QTOLWUN | Change to Lower Specification Limit | |
111 | ![]() |
QTXT10 | Text Line for Additional Information | |
112 | ![]() |
QTXT20 | Text Line for Additional Information | |
113 | ![]() |
QTXT40 | Text Line for Additional Information | |
114 | ![]() |
QTXTMETHOD | Short Text for Inspection Method | |
115 | ![]() |
QTXTSMPPRO | Short Text for the Sampling Procedure | |
116 | ![]() |
QTXT_CHA | Short Text for Inspection Characteristic | |
117 | ![]() |
QTXT_CODE | Short Text for Code | |
118 | ![]() |
QTXT_CODE | Short Text for Code | |
119 | ![]() |
QTXT_CODE | Short Text for Code | |
120 | ![]() |
QTXT_GROUP | Short Text for the Code Group/Selected Set | |
121 | ![]() |
QTXT_GROUP | Short Text for the Code Group/Selected Set | |
122 | ![]() |
QTXT_GROUP | Short Text for the Code Group/Selected Set | |
123 | ![]() |
QTXT_GROUP | Short Text for the Code Group/Selected Set | |
124 | ![]() |
QTXT_GROUP | Short Text for the Code Group/Selected Set | |
125 | ![]() |
QUMREN | Factor for Converting MatUnitOfMeasure to SampUnitOfMeasure | |
126 | ![]() |
QUMRENPME | Factor for Converting SampUnitOfMeasure to MatUnitOfMeasure | |
127 | ![]() |
QVERSDAT | Key Date for Version Selection | |
128 | ![]() |
QVERSDAT | Key Date for Version Selection | |
129 | ![]() |
QVERSDAT | Key Date for Version Selection | |
130 | ![]() |
QVERSDAT | Key Date for Version Selection | |
131 | ![]() |
QVERSDAT | Key Date for Version Selection | |
132 | ![]() |
QVERSDAT | Key Date for Version Selection | |
133 | ![]() |
QVERSNR | Version Number | |
134 | ![]() |
QVERSNR | Version Number | |
135 | ![]() |
QVERSNR | Version Number | |
136 | ![]() |
QVERSNR | Version Number | |
137 | ![]() |
QVERSNR | Version Number | |
138 | ![]() |
QVERSNR | Version Number | |
139 | ![]() |
QVERSNR | Version Number | |
140 | ![]() |
QVERSNRMK | Version Number of the Master Inspection Characteristic | |
141 | ![]() |
QVERSNRPM | Version Number of the Inspection Method | |
142 | ![]() |
QWERKAUSW | Plant of the Assigned Selected Set | |
143 | ![]() |
QWERKAUSW | Plant of the Assigned Selected Set | |
144 | ![]() |
QWERKAUSW | Plant of the Assigned Selected Set | |
145 | ![]() |
QWERKAUSW | Plant of the Assigned Selected Set | |
146 | ![]() |
QWERKAUSW | Plant of the Assigned Selected Set | |
147 | ![]() |
QZAEHLER | Plant for the Master Inspection Characteristic | |
148 | ![]() |
Q_METH_PLANT | Plant for Inspection Method | |
149 | ![]() |
SPRAS | Language Key | |
150 | ![]() |
SPRAS | Language Key | |
151 | ![]() |
TECHV | Technical status from | |
152 | ![]() |
VAL_TEXT | Short Text for Fixed Values | |
153 | ![]() |
VBKZ | Update indicator | |
154 | ![]() |
WERKS_D | Plant |