SAP ABAP Message Class RSM (RSM)
Basic Data
Hierarchy
☛
SAP_BW (Software Component) SAP Business Warehouse
⤷
BW-WHM (Application Component) Warehouse Management
⤷
BW_CORE_WHM_MISC (Package) BW WHM parts that are needed in the CORE

⤷

⤷

Attributes
Message class | ![]() |
RSM |
Short Description | ![]() |
|
Changed On | ![]() |
20130531 |
Last Changed At | ![]() |
114829 |
Messages
# | Message | Message Short Text | Documentation status | Authorization check |
---|---|---|---|---|
1 | ![]() |
*** Data request to the OLTP *** | ||
2 | ![]() |
Data type & is not known | ||
3 | ![]() |
Transfer structure has not been created yet | ||
4 | ![]() |
No & for object & in source system & | Space: object requires documentation | |
5 | ![]() |
Transfer structure is not yet active | ||
6 | ![]() |
Attributes are not yet maintained | Space: object requires documentation | |
7 | ![]() |
Request & cannot be set to GREEN by QM action -> see long text | Space: object requires documentation | |
8 | ![]() |
Job &, count & cannot be executed in language & | The short text describes the object sufficiently | |
9 | ![]() |
Unknown problem when changing executing language of job &, count & | The short text describes the object sufficiently | |
10 | ![]() |
Enter partitioning number for field '&' | The short text describes the object sufficiently | |
11 | ![]() |
Partitioning would lead to & partitions - maximum of 1000 allowed | The short text describes the object sufficiently | |
12 | ![]() |
Enter a FROM and TO value for field & | The short text describes the object sufficiently | |
13 | ![]() |
Error: FROM value for field & is greater than TO value | The short text describes the object sufficiently | |
14 | ![]() |
From value & smaller than minimum from value &; Correct the values | The short text describes the object sufficiently | |
15 | ![]() |
To value & greater than maximum to value &; Correct the values | The short text describes the object sufficiently | |
16 | ![]() |
Checking '&' entries in table RSSTATMANREQMAP for inconsistencies | The short text describes the object sufficiently | |
17 | ![]() |
Inconsistencies found '&'; in RSSTATMANSTATUS '&' | The short text describes the object sufficiently | |
18 | ![]() |
No DTP from this Datasource '&' to this target '&' | The short text describes the object sufficiently | |
19 | ![]() |
Data target '&' cannot be filled because a DTP update is active | Space: object requires documentation | |
20 | ![]() |
& records updated in the fact table | Space: object requires documentation | |
21 | ![]() |
& records written in the fact table | Space: object requires documentation | |
22 | ![]() |
Discrepancy between number range object & and dimension table | ||
23 | ![]() |
Error when calling up number range object & | Space: object requires documentation | |
24 | ![]() |
Request &(&) is not yet active - no activation log available | The short text describes the object sufficiently | |
25 | ![]() |
BW-relevant hierarchies are stored for DataSource/source system | Space: object requires documentation | |
26 | ![]() |
The problem report was called with request SID &; termination error & | Space: object requires documentation | |
27 | ![]() |
Select at least one DataSource, source system or request | The short text describes the object sufficiently | |
28 | ![]() |
Cannot find entries to be deleted from RSSDLINIT with these selections | The short text describes the object sufficiently | |
29 | ![]() |
Cannot set lock on ERSSDLINIT with DS & and SS &; Locked by & | The short text describes the object sufficiently | |
30 | ![]() |
High value and var.<'6' deleted for fields that ONLY allow single values | The short text describes the object sufficiently | |
31 | ![]() |
DTP requests cannot be deleted from master data and text tables | The short text describes the object sufficiently | |
32 | ![]() |
QM action not allowed for DTP requests in master data and text tables | The short text describes the object sufficiently | |
33 | ![]() |
Data target '&' removed from list of loadable targets; not loadable | The short text describes the object sufficiently | |
34 | ![]() |
Data target '&' does not belong to BWAPPL 'BI'; data target not loadable | The short text describes the object sufficiently | |
35 | ![]() |
Data target '&' is transactional and is in 'planning mode' | The short text describes the object sufficiently | |
36 | ![]() |
Data target '&' is not active or is incorrect; no loading allowed | The short text describes the object sufficiently | |
37 | ![]() |
Request '&' already exists in DTA '&'; transferred by DTP request '&(&)' | The short text describes the object sufficiently | |
38 | ![]() |
Row '&' overlaps with the preceding rows | The short text describes the object sufficiently | |
39 | ![]() |
No overlaps in distribution for field '&' | The short text describes the object sufficiently | |
40 | ![]() |
No overlaps in selection partitions | The short text describes the object sufficiently | |
41 | ![]() |
Enter a FROM value and a TO value for field '&' in row '&' | The short text describes the object sufficiently | |
42 | ![]() |
FROM value for field '&' is greater than TO value in row '&' | The short text describes the object sufficiently | |
43 | ![]() |
Partitions not yet distributed | The short text describes the object sufficiently | |
44 | ![]() |
Enter selections for field '&' on the tab page for the field | The short text describes the object sufficiently | |
45 | ![]() |
Greatest single selection for field & is not equal to max. selection & | The short text describes the object sufficiently | |
46 | ![]() |
Lowest single selection for field & is not equal to min. selection & | The short text describes the object sufficiently | |
47 | ![]() |
InfoPackage & has different selected hierarchy | Space: object requires documentation | |
48 | ![]() |
No SHIPDVERS change; InfoPackage '&' does not exist in shadow tables | The short text describes the object sufficiently | |
49 | ![]() |
Starting transfer of shadow InfoPackage '&' for source system '&' | The short text describes the object sufficiently | |
50 | ![]() |
An RFC call-up triggered the exception | ||
51 | ![]() |
Enter a description for the InfoSource | Space: object requires documentation | |
52 | ![]() |
FB RSM1_CHECK_DM_GOT_REQUEST called from PRG &1; row &2 | Space: object requires documentation | |
53 | ![]() |
Request '&1'; DTA '&2'; action '&3'; with dialog '&4' | Space: object requires documentation | |
54 | ![]() |
Leave RSM1_CHECK_DM_GOT_REQUEST in row &1; Req_State '&2' | Space: object requires documentation | |
55 | ![]() |
Note source system '&1' for deletion in row '&2'; severity '&3' | Space: object requires documentation | |
56 | ![]() |
Note source system '&1' for compression in row '&2'; severity '&3' | Space: object requires documentation | |
57 | ![]() |
Call RSB2_DELTA_INACTIVATE with IC '&1'; LS '&2'; Enqueue in row '&3' | Space: object requires documentation | |
58 | ![]() |
Call RSB2_DELTA_INACTIVATE mit IC '&1'; LS '&2'; Dequeue in row '&3' | Space: object requires documentation | |
59 | ![]() |
Call up RSM1_MESSAGE_POPUP_WITH_DECID in row '&1' | Space: object requires documentation | |
60 | ![]() |
Call RSB2_DELTA_INACTIVATE with IC '&1'; LS '&2'; Delete mode in row '&3' | Space: object requires documentation | |
61 | ![]() |
Error message with RSB2_DELTA_INACTIVATE; Subrc '&1'; row '&2' | Space: object requires documentation | |
62 | ![]() |
&1 error while checking status of job | Space: object requires documentation | |
63 | ![]() |
InfoPackage assignment to group & deleted | The short text describes the object sufficiently | |
64 | ![]() |
& & written to transport request | The short text describes the object sufficiently | |
65 | ![]() |
Xpra conversion of ___T DTAs to $T performed successfully | The short text describes the object sufficiently | |
66 | ![]() |
Cannot determine request list for InfoCube &; no switching | The short text describes the object sufficiently | |
67 | ![]() |
Request &(&) is yellow or red in InfoCube &; cannot switch to planning | The short text describes the object sufficiently | |
68 | ![]() |
Target & set to 'Planning Mode'- requests cannot be deleted | The short text describes the object sufficiently | |
69 | ![]() |
Xpra conversion of table RSMONICDP finished successfully | The short text describes the object sufficiently | |
70 | ![]() |
Report terminated; See SAP Note & | The short text describes the object sufficiently | |
71 | ![]() |
No inconsistent InfoPackages/shadow table entries found | The short text describes the object sufficiently | |
72 | ![]() |
Join table & does not exist - read SAP Note 871084 | The short text describes the object sufficiently | |
73 | ![]() |
Loading of request & ended in DataStore object & | Space: object requires documentation | |
74 | ![]() |
No changes necessary | The short text describes the object sufficiently | |
75 | ![]() |
Field STARTDTTYP wrongly filled with & - only 'I','D',W',E','A' allowed | The short text describes the object sufficiently | |
76 | ![]() |
Request & already updated in target & by DTP request &(&) | Space: object requires documentation | |
77 | ![]() |
Job terminated in source system --> Request set to red | The short text describes the object sufficiently | |
78 | ![]() |
Cannot obtain lock for DTP load switch; termination; DTA &;DS &;LS & | The short text describes the object sufficiently | |
79 | ![]() |
Request '&(&)' in DTA '&' locked against Qualok by real-time planning | The short text describes the object sufficiently | |
80 | ![]() |
Greatest partition & for field & is not equal to single sel. & in row & | The short text describes the object sufficiently | |
81 | ![]() |
Smallest partition & for field & is not equal to single sel. & in row & | The short text describes the object sufficiently | |
82 | ![]() |
Select a column for sorting | The short text describes the object sufficiently | |
83 | ![]() |
QM action canceled | The short text describes the object sufficiently | |
84 | ![]() |
No active DataSource '&' for source system '&'; action terminated | The short text describes the object sufficiently | |
85 | ![]() |
InfoPackage type '&' <> DataSource type '&'; change DS or delete IP | The short text describes the object sufficiently | |
86 | ![]() |
Open planning request '&(&)' closed in InfoCube & | The short text describes the object sufficiently | |
87 | ![]() |
Start hashing request & | The short text describes the object sufficiently | |
88 | ![]() |
Hashing of request & completed | The short text describes the object sufficiently | |
89 | ![]() |
Number of hashed request: & | The short text describes the object sufficiently | |
90 | ![]() |
Open planning request '&1(&2)' exists in InfoCube '&3' | The short text describes the object sufficiently | |
91 | ![]() |
Full &1 has overlapping selections with init. &2: No updates into &3 | Space: object requires documentation | |
92 | ![]() |
Initial request &1(&2) is green but not in DSO; Update first | Space: object requires documentation | |
93 | ![]() |
Request &1(&2) has not or not correctly been updated; Please edit | Space: object requires documentation | |
94 | ![]() |
Update mode &1 is not allowed in a DSO | Space: object requires documentation | |
95 | ![]() |
Full updates already available in DSO &1; Cannot update init./delta | Space: object requires documentation | |
96 | ![]() |
Delta updates already available in DSO &1; Cannot update full | Space: object requires documentation | |
97 | ![]() |
*** Data arrived from OLTP *** | ||
98 | ![]() |
Combination of source system & and InfoSource & does not exist yet | ||
99 | ![]() |
Transfer str. & does not exist in tab. RSISOLTP | ||
100 | ![]() |
Programs not generated for InfoSource & and source system & | ||
101 | ![]() |
Transformation program & does not exist! | ||
102 | ![]() |
No entries found for request no. & | Space: object requires documentation | |
103 | ![]() |
Info-Idoc contains no data to be evaluated | ||
104 | ![]() |
Transfer program & is incorrect. Short dump started | ||
105 | ![]() |
IDoc was successfully transferred to the updating of the InfoCubes | ||
106 | ![]() |
IDoc was successfully transferred to the monitor updating | ||
107 | ![]() |
Invalid request number (&) found in IDoc | ||
108 | ![]() |
Invalid IDoc segment & found | ||
109 | ![]() |
No valid IDoc segment found | ||
110 | ![]() |
No valid IDoc header segment found | ||
111 | ![]() |
Unspecified error in the update | ||
112 | ![]() |
Error when determining the update program for InfoObject & | ||
113 | ![]() |
Error in an arithmetic operation or a data conversion | ||
114 | ![]() |
Error in an arithmetic operation or a data conversion | ||
115 | ![]() |
Returncode & with the conversion for the field & | ||
116 | ![]() |
IDoc & does not exist (change) | ||
117 | ![]() |
IDoc & is not of inbound processing type (change) | ||
118 | ![]() |
IDoc status was reset | ||
119 | ![]() |
IDoc & has status &. Resetting unnecessary | ||
120 | ![]() |
& received. Processing being started. | Space: object requires documentation | |
121 | ![]() |
Processing completed | Space: object requires documentation | |
122 | ![]() |
Unspecified error when processing | Space: object requires documentation | |
123 | ![]() |
Picture missing on the database | The short text describes the object sufficiently | |
124 | ![]() |
Processing & finished | Space: object requires documentation | |
125 | ![]() |
Cannot generate request & (yet) | Space: object requires documentation | |
126 | ![]() |
Processing terminated due to resource bottlenecks (background job) | Space: object requires documentation | |
127 | ![]() |
Length & does not match the template | Space: object requires documentation | |
128 | ![]() |
Request '&' is realtime request that cannot be closed; see long text | Space: object requires documentation | |
129 | ![]() |
Submit report for RSBATCH_EXECUTE_PROZESS report failed -> long text | Space: object requires documentation | |
130 | ![]() |
Warning: Data could be lost; for more information, see the long text | Space: object requires documentation | |
131 | ![]() |
Lock & & could not be set - Termination ! | The short text describes the object sufficiently | |
132 | ![]() |
InfoPackage &1 does not exist in D version; activation not possible | The short text describes the object sufficiently | |
133 | ![]() |
DS & for source sys. & does not exist; InfoPackage & cannot be activated | The short text describes the object sufficiently | |
134 | ![]() |
Parameter definition & maximum length & shortened to length 128 | Space: object requires documentation | |
135 | ![]() |
DataSource '&' not active in source system '&' - Termination | The short text describes the object sufficiently | |
136 | ![]() |
Unable to create routine for variant &; Abort | The short text describes the object sufficiently | |
137 | ![]() |
DS/QS &1/&2 is a data mart (Cube/DSO). Automatic repeats not supported | The short text describes the object sufficiently | |
138 | ![]() |
No authorization for variant & from process type & | The short text describes the object sufficiently | |
139 | ![]() |
Invalid entry, hierarchy &1 does not exist | The short text describes the object sufficiently | |
140 | ![]() |
Transfer structure & does not exist | ||
141 | ![]() |
Communication structure & does not exist | ||
142 | ![]() |
Source system type is not allowed | Space: object requires documentation | |
143 | ![]() |
Request &1 is not activated completely; activate this first | Space: object requires documentation | |
144 | ![]() |
InfoSource & (&) does not deliver any texts | ||
145 | ![]() |
Search term & not found | Space: object requires documentation | |
146 | ![]() |
Incorrect monitor logging call: Data packet with call 09! | Space: object requires documentation | |
147 | ![]() |
This function has not yet been implemented | ||
148 | ![]() |
Function no longer maintained -> Choose tree display | Space: object requires documentation | |
149 | ![]() |
Invalid data type: & | ||
150 | ![]() |
Changes saved | ||
151 | ![]() |
The field name is not given | ||
152 | ![]() |
Field name & used several times | ||
153 | ![]() |
Source system & already exists. Please change your entries | Space: object requires documentation | |
154 | ![]() |
Source system & can no longer be used. | Space: object requires documentation | |
155 | ![]() |
Source system & does not exist | Space: object requires documentation | |
156 | ![]() |
No InfoSource found | ||
157 | ![]() |
No connection to system & possible: & | Space: object requires documentation | |
158 | ![]() |
Data class & is unknown | Space: object requires documentation | |
159 | ![]() |
InfoSource is unknown | ||
160 | ![]() |
Data class & is unknown | Space: object requires documentation | |
161 | ![]() |
Function canceled due to user entry | ||
162 | ![]() |
Object '&1 &2' required for authorization check does not exist | The short text describes the object sufficiently | |
163 | ![]() |
Specify a length or a template | Space: object requires documentation | |
164 | ![]() |
The length of the material number must not exceed 18 characters | Space: object requires documentation | |
165 | ![]() |
Wild cards '*' are not allowed when selecting 'to-values' | The short text describes the object sufficiently | |
166 | ![]() |
Wild cards '*' are only allowed at the end of a selection | The short text describes the object sufficiently | |
167 | ![]() |
'From-value' has wild card '*'; 'to-value' has to be blank (EQ only) | The short text describes the object sufficiently | |
168 | ![]() |
System error for system &: & | Space: object requires documentation | |
169 | ![]() |
No backup copy of the compressed request created | The short text describes the object sufficiently | |
170 | ![]() |
InfoCube is not compressed | The short text describes the object sufficiently | |
171 | ![]() |
Backup copy contains errors - highest compressed request is missing | The short text describes the object sufficiently | |
172 | ![]() |
User & does not have sufficient authorization to change the job status | Space: object requires documentation | |
173 | ![]() |
Report & for deleting the error log started in the background | The short text describes the object sufficiently | |
174 | ![]() |
Error starting the report & for deleting the error log in the background | The short text describes the object sufficiently | |
175 | ![]() |
Transfer & data records | Space: object requires documentation | |
176 | ![]() |
*** Scheduler *** | ||
177 | ![]() |
InfoPackage group & renamed to & | Space: object requires documentation | |
178 | ![]() |
Variant saved | ||
179 | ![]() |
No InfoSource found for your entries | ||
180 | ![]() |
InfoPackage & was renamed to & | ||
181 | ![]() |
InfoPackage group & deleted | Space: object requires documentation | |
182 | ![]() |
Check off only exactly one field | ||
183 | ![]() |
Enter next period | ||
184 | ![]() |
Enter number of periods per year | ||
185 | ![]() |
New InfoPackage group & created | Space: object requires documentation | |
186 | ![]() |
New InfoPackage & created | ||
187 | ![]() |
InfoPackage & deleted | ||
188 | ![]() |
Data selection was incomplete. No batch run activated | ||
189 | ![]() |
InfoPackage & assigned to InfoPackage group & | Space: object requires documentation | |
190 | ![]() |
You can only ever edit one variant/ID !!! | ||
191 | ![]() |
Summarize several variants/ID for new variant/ID | ||
192 | ![]() |
Please enter a new group name. | ||
193 | ![]() |
Please enter further explanation | ||
194 | ![]() |
You can always only edit one InfoPackage group | Space: object requires documentation | |
195 | ![]() |
Select the row, for which you want to undertake several entries | ||
196 | ![]() |
Entry fields must be empty | ||
197 | ![]() |
Basic entry for field &1 cannot be deleted | Space: object requires documentation | |
198 | ![]() |
Error with transfer. Code & | ||
199 | ![]() |
Elementary data request put together | ||
200 | ![]() |
Combination of InfoSource/source system/function name does not exist | ||
201 | ![]() |
Transfer & data records in communication structure | ||
202 | ![]() |
Confirmed with: & | ||
203 | ![]() |
Data saved successfully | ||
204 | ![]() |
Data was not saved | ||
205 | ![]() |
& records updated on the database | ||
206 | ![]() |
& text(s) updated | ||
207 | ![]() |
Master data updated | ||
208 | ![]() |
Data was requested | Space: object requires documentation | |
209 | ![]() |
Edit data packet no. & | ||
210 | ![]() |
With & data records | ||
211 | ![]() |
Data packet & had & records selected for it | Space: object requires documentation | |
212 | ![]() |
Data selection status = & | ||
213 | ![]() |
Info IDoc no. & arrived | ||
214 | ![]() |
No input help is available | ||
215 | ![]() |
Hierarchies updated | ||
216 | ![]() |
Errors in source system | ||
217 | ![]() |
Data put together in source system | ||
218 | ![]() |
Data obsolete in source system | ||
219 | ![]() |
No data available in source system for your selection | ||
220 | ![]() |
Collection in source system ended | ||
221 | ![]() |
Start of the user-defined data enhancement | ||
222 | ![]() |
Determining the InfoCubes to be updated: & Cube(s) | ||
223 | ![]() |
Start aggregation for InfoCube & | ||
224 | ![]() |
End aggregation for InfoCube & | ||
225 | ![]() |
InfoCube & will be updated | ||
226 | ![]() |
This packet already exists, please select new name | ||
227 | ![]() |
Please select an InfoPackage | ||
228 | ![]() |
Enter a text | ||
229 | ![]() |
Please select an InfoPackage group | Space: object requires documentation | |
230 | ![]() |
This InfoPackage group already exists | Space: object requires documentation | |
231 | ![]() |
This name already exists, please select a new name | ||
232 | ![]() |
Selection successfully saved | ||
233 | ![]() |
Selection canceled | ||
234 | ![]() |
No hierarchies available | ||
235 | ![]() |
No applications with connected InfoSources available | ||
236 | ![]() |
No InfoSources available | ||
237 | ![]() |
No source system with InfoSources connected | ||
238 | ![]() |
No InfoPackage group exists | Space: object requires documentation | |
239 | ![]() |
Data request scheduled | ||
240 | ![]() |
Still no selections planned for Infopackage & | ||
241 | ![]() |
Data request canceled | ||
242 | ![]() |
Please select an InfoPackage or an InfoPackage group | Space: object requires documentation | |
243 | ![]() |
No variants exist | ||
244 | ![]() |
Discrepancy - This InfoPackage has been deleted | ||
245 | ![]() |
InfoPackage scheduled, it cannot be deleted | ||
246 | ![]() |
No InfoSources exist for this application | ||
247 | ![]() |
This InfoSource does not exist | ||
248 | ![]() |
This source system does not exist | ||
249 | ![]() |
This InfoPackage group does not exist | Space: object requires documentation | |
250 | ![]() |
This combination of application and InfoSource does not exist | ||
251 | ![]() |
This InfoSource does not exist in this source system | ||
252 | ![]() |
You can only enter selections for InfoPackages | ||
253 | ![]() |
No entries available for this packet | ||
254 | ![]() |
Select an InfoPackage group | Space: object requires documentation | |
255 | ![]() |
Please select an InfoPackage group or InfoPackage | Space: object requires documentation | |
256 | ![]() |
InfoPackage & copied | ||
257 | ![]() |
Copy order canceled | ||
258 | ![]() |
This variant does not exist | ||
259 | ![]() |
There are no hierarchies for this InfoSource in source system | ||
260 | ![]() |
Error: From value is larger than to value | ||
261 | ![]() |
Error: Please enter correct date | ||
262 | ![]() |
Error: Please enter correct time | ||
263 | ![]() |
Error: No numerical value | ||
264 | ![]() |
Batch job & with job number & deleted | ||
265 | ![]() |
Scheduler canceled by user & | ||
266 | ![]() |
Variant change: From variant & to variant & | ||
267 | ![]() |
Save InfoPackage & | ||
268 | ![]() |
Save variant & in selection table RSLDPSEL | ||
269 | ![]() |
Save hierarchy folder of the scheduler for variant & | ||
270 | ![]() |
Save InfoPackage for variant &. | ||
271 | ![]() |
Save texts of the InfoPackage groups for variant & | Space: object requires documentation | |
272 | ![]() |
Save texts of the InfoPackage for variant & | ||
273 | ![]() |
Batch job & with job number & activated | ||
274 | ![]() |
Data saved in RSSDBATCH for batch job & and Jobcount & | Space: object requires documentation | |
275 | ![]() |
InfoPackage & copied to variant & | ||
276 | ![]() |
*** Update rules - reserved to 499 | The short text describes the object sufficiently | |
277 | ![]() |
No active communication structure & available | ||
278 | ![]() |
Internal error when reading the data for InfoCube & | ||
279 | ![]() |
Update rules for & & already available | ||
280 | ![]() |
Still no update rules created for & & | ||
281 | ![]() |
InfoSource & & not maintained | ||
282 | ![]() |
Source InfoObject & is in the update, but not in the comm. structure | ||
283 | ![]() |
Version delivered by SAP displayed for & & | The short text describes the object sufficiently | |
284 | ![]() |
Suggestion for the update rules was generated from the InfoCube | ||
285 | ![]() |
Update rules saved for & & without checks | ||
286 | ![]() |
Update type 'overwrite' is the only one allowed for CHAR data types | ||
287 | ![]() |
Update rule for & & was deleted | ||
288 | ![]() |
No check required | ||
289 | ![]() |
Checking update rules for & & | ||
290 | ![]() |
No errors when checking the update rules for & & | ||
291 | ![]() |
No source InfoObject created for characteristic & | ||
292 | ![]() |
No routine created for key figure & | ||
293 | ![]() |
No source key figure created for key figure & | ||
294 | ![]() |
& : Key figure already used with other update type & | ||
295 | ![]() |
Neither source characteristic nor routine created for characteristic &. | ||
296 | ![]() |
No check necessary as the update for key figure & is inactive | ||
297 | ![]() |
Routine & for characteristic & is not available | ||
298 | ![]() |
Target unit and source unit for key figure & differ. | ||
299 | ![]() |
Characteristic & is in the update rule, but not in the InfoCube def. | ||
300 | ![]() |
Only duplicated key figures can be deleted here | ||
301 | ![]() |
Update is already active | ||
302 | ![]() |
Key figure & is in the update rule, but not in the InfoCube def. | ||
303 | ![]() |
Routine for key figure & is already available | ||
304 | ![]() |
No routine maintained for characteristic &. | ||
305 | ![]() |
The entered routine & for key figure & is not available yet. | ||
306 | ![]() |
InfoCube & not yet maintained | ||
307 | ![]() |
No SAP version available | The short text describes the object sufficiently | |
308 | ![]() |
Active version restored | The short text describes the object sufficiently | |
309 | ![]() |
No active version available yet - restoring not possible | ||
310 | ![]() |
InfoCube & not available (please check entry). | ||
311 | ![]() |
InfoSource & not available | ||
312 | ![]() |
New generation or activation not necessary. | ||
313 | ![]() |
Generation terminated | ||
314 | ![]() |
Check was successful | ||
315 | ![]() |
Syntax error in routine &, row &. & | ||
316 | ![]() |
No source characteristic maintained for characteristic & | ||
317 | ![]() |
The entered name of routine & is not the same as the saved one | ||
318 | ![]() |
No communication structure exists for InfoSource & | ||
319 | ![]() |
Routine name already exists | ||
320 | ![]() |
The name name of a routine must consist of at least one character. | ||
321 | ![]() |
Update rules for & & have not yet been generated | ||
322 | ![]() |
Generated update rules already exist for & & | ||
323 | ![]() |
Active update rules already exist for & & | ||
324 | ![]() |
No activation allowed in display mode | ||
325 | ![]() |
No change of the source unit possible with fixed units | ||
326 | ![]() |
No maintenance allowed in display mode. | ||
327 | ![]() |
Activation was successful | ||
328 | ![]() |
Error reading from database | ||
329 | ![]() |
Error writing to the database | ||
330 | ![]() |
Deactivation was successful | ||
331 | ![]() |
No active version is available | ||
332 | ![]() |
IC=& IS=& error when reading the update rules | The short text describes the object sufficiently | |
333 | ![]() |
IC=& IS=& error when generating the InfoCube write program | The short text describes the object sufficiently | |
334 | ![]() |
IC=& IS=& error when checking the update rules | The short text describes the object sufficiently | |
335 | ![]() |
IC=& IS=& error when creating a generated program | The short text describes the object sufficiently | |
336 | ![]() |
IC=& IS=& error when saving the information about update rules | The short text describes the object sufficiently | |
337 | ![]() |
IC=& IS=& template not found | The short text describes the object sufficiently | |
338 | ![]() |
IC=& IS=& syntax error in template: & rows & | The short text describes the object sufficiently | |
339 | ![]() |
IC=& IS=& syntax error in generated program: & rows & | The short text describes the object sufficiently | |
340 | ![]() |
IC=& IS=& general error when generating | The short text describes the object sufficiently | |
341 | ![]() |
IC=& IS=& error when determining the communication structure | The short text describes the object sufficiently | |
342 | ![]() |
IC=& IS=& error when determining the view names for InfoCube | The short text describes the object sufficiently | |
343 | ![]() |
IC=& IS=& Error with determination of field names for an InfoCube | The short text describes the object sufficiently | |
344 | ![]() |
IC=& IS=& Error when determining the name of the generated program | The short text describes the object sufficiently | |
345 | ![]() |
No unit maintained for key figure & | ||
346 | ![]() |
Object is currently being blocked by user & (Enter = Display) | ||
347 | ![]() |
System error: The object could not be blocked | ||
348 | ![]() |
Transaction cannot be carried out due to an internal error | ||
349 | ![]() |
The check of the update rule for key figure & was successful | ||
350 | ![]() |
Generation of the update rules for & & | ||
351 | ![]() |
Program & successfully generated | ||
352 | ![]() |
Error when determining the communication structure for the InfoSource | ||
353 | ![]() |
Error in the communication structure enhancement for the InfoSource | ||
354 | ![]() |
Error when determing the InfoCubes to be updated for the InfoSource | ||
355 | ![]() |
Error when determining the status of the generated program | ||
356 | ![]() |
Error when generating the update program | ||
357 | ![]() |
Error when updating the InfoCube using the update program | ||
358 | ![]() |
No InfoCubes exist for updating | ||
359 | ![]() |
A serious error has occurred in the update program | ||
360 | ![]() |
InfoCube & is not actively available in Dictionary | The short text describes the object sufficiently | |
361 | ![]() |
InfoCube & was updated | ||
362 | ![]() |
No 'From' value available with maintained 'To' value | Space: object requires documentation | |
363 | ![]() |
An internal error occurred when deleting the InfoCube | ||
364 | ![]() |
Deletion of the InfoCube canceled by the user | ||
365 | ![]() |
Deletion of InfoCube not possible as data packets are scheduled for it | ||
366 | ![]() |
The content of InfoCube & was successfully deleted | ||
367 | ![]() |
Please place the cursor on the name of a routine first | Space: object requires documentation | |
368 | ![]() |
IC=& IS=& general error when generating the simulation program | ||
369 | ![]() |
Error when determining request information from Monitor | ||
370 | ![]() |
*** Monitor and tree | ||
371 | ![]() |
All selections deleted | ||
372 | ![]() |
Please refresh this tree - no current data | ||
373 | ![]() |
Please delete all entries under this subtree first | ||
374 | ![]() |
Error when creating dimension table. Error & | ||
375 | ![]() |
Incorrect type for this dimension | ||
376 | ![]() |
Error in the data request | ||
377 | ![]() |
No & available for InfoSource & in source system & | ||
378 | ![]() |
You cannot archive the totals record, it is already archived | Space: object requires documentation | |
379 | ![]() |
No texts, master data or hierarchies | ||
380 | ![]() |
This record is already available in the monitor IC | ||
381 | ![]() |
This is only a totals record - no further data available | ||
382 | ![]() |
Data requested | ||
383 | ![]() |
Action canceled | ||
384 | ![]() |
You can only delete entries that are already archived | ||
385 | ![]() |
Please save first | ||
386 | ![]() |
No help text available for this characteristic | ||
387 | ![]() |
No meta data available for the combination InfoObject & source system & | ||
388 | ![]() |
Request number & is invalid | ||
389 | ![]() |
No data request exists for request number & | ||
390 | ![]() |
IDoc no. & for request & has already been processed once | ||
391 | ![]() |
InfoPackage & has already been processed (Req. & IDoc &) | ||
392 | ![]() |
Wrong Input Parameters | ||
393 | ![]() |
No scheduled jobs found for InfoSource & in source system & | ||
394 | ![]() |
Save InfoPackage group & | Space: object requires documentation | |
395 | ![]() |
No saving necessary in this tree | ||
396 | ![]() |
Request & is already archived, please import from the archive first | Space: object requires documentation | |
397 | ![]() |
No long text available | ||
398 | ![]() |
Request & currently being edited (IDoc &) | ||
399 | ![]() |
Request & found; not yet finished | Space: object requires documentation | |
400 | ![]() |
Edit InfoPackage & | Space: object requires documentation | |
401 | ![]() |
Selections changed for & | ||
402 | ![]() |
Hierarchy selections changed for & | ||
403 | ![]() |
Scheduling changed for & | Space: object requires documentation | |
404 | ![]() |
External system destination changed for & | ||
405 | ![]() |
3rd Party settings changed for & | Space: object requires documentation | |
406 | ![]() |
IDoc was not updated using update simulation | ||
407 | ![]() |
Update: Start simulation for InfoCube & | ||
408 | ![]() |
Update: End simulation for InfoCube & | ||
409 | ![]() |
Data request arrived in source system | ||
410 | ![]() |
Edit InfoPackage group & | Space: object requires documentation | |
411 | ![]() |
For InfoSource & | Space: object requires documentation | |
412 | ![]() |
For source system & | Space: object requires documentation | |
413 | ![]() |
Data source established for & : & | Space: object requires documentation | |
414 | ![]() |
Data target for & changed | Space: object requires documentation | |
415 | ![]() |
Cannot find job & in BW system | The short text describes the object sufficiently | |
416 | ![]() |
Only use types KYF or CHA | ||
417 | ![]() |
Canceled | ||
418 | ![]() |
Source system with this name already exists, please select a new name. | Space: object requires documentation | |
419 | ![]() |
No transfer structure created | ||
420 | ![]() |
Deletion of SAP applications is not allowed | ||
421 | ![]() |
Texts of an SAP application cannot be changed | ||
422 | ![]() |
Texts of an SAP InfoSource cannot be changed | ||
423 | ![]() |
Please change source systems in source system catalog | Space: object requires documentation | |
424 | ![]() |
You cannot hide this node | ||
425 | ![]() |
You cannot delete this node | ||
426 | ![]() |
An InfoPackage already available for source & source system & data type & | ||
427 | ![]() |
TCP/IP external data cannot be loaded yet | ||
428 | ![]() |
Request & not found | ||
429 | ![]() |
No update mode found | ||
430 | ![]() |
No InfoCube & found | ||
431 | ![]() |
Data Provider & is not active | Space: object requires documentation | |
432 | ![]() |
Select a line | Space: object requires documentation | |
433 | ![]() |
Please position cursor on a row | Space: object requires documentation | |
434 | ![]() |
No InfoCube and no check table updated | ||
435 | ![]() |
No limiting selections available | ||
436 | ![]() |
No hierarchy selections available | ||
437 | ![]() |
Termination when requesting the data with the scheduler (short dump...) | The short text describes the object sufficiently | |
438 | ![]() |
No data request available for this data !!! | The short text describes the object sufficiently | |
439 | ![]() |
This IDoc is already updated and cannot be updated again | Space: object requires documentation | |
440 | ![]() |
IDocs not found for this request in either source system or Warehouse | ||
441 | ![]() |
No updated Info IDocs found | ||
442 | ![]() |
No updated data IDocs found for Info IDoc & | ||
443 | ![]() |
No updated data packets found for this request | Space: object requires documentation | |
444 | ![]() |
No detail information found on data packet & | Space: object requires documentation | |
445 | ![]() |
No IDocs found for this request in the Business Information Warehouse | ||
446 | ![]() |
No IDocs found for this request in the source system | ||
447 | ![]() |
Please select the column, that should be sorted | Space: object requires documentation | |
448 | ![]() |
Only Info IDocs with status 1 can contain information on data IDocs | ||
449 | ![]() |
No F4-help available (empty check table) | ||
450 | ![]() |
InfoPackage is assigned to group &; no deleting possible | Space: object requires documentation | |
451 | ![]() |
Job currently running; cannot be deleted | ||
452 | ![]() |
You can only process data IDocs in simulated form in the Warehouse | Space: object requires documentation | |
453 | ![]() |
Incorrect selection of the IDoc records | ||
454 | ![]() |
Enter the records, for which the simulation should be executed | Space: object requires documentation | |
455 | ![]() |
Select the InfoCube, for which you wish to carry out the simulation | Space: object requires documentation | |
456 | ![]() |
Do not process at once | Space: object requires documentation | |
457 | ![]() |
There are currently no InfoPackages; please create an InfoPackage first | Space: object requires documentation | |
458 | ![]() |
Please check off at least one data type for which you wish to load data | Space: object requires documentation | |
459 | ![]() |
Please enter a number > 0 with 'Terminate job after X runs' | Space: object requires documentation | |
460 | ![]() |
Fill the mandatory entry fields | Space: object requires documentation | |
461 | ![]() |
Either enter a hexadecimal number or a character | Space: object requires documentation | |
462 | ![]() |
Select a hierarchy | Space: object requires documentation | |
463 | ![]() |
The InfoPackage could not be deleted. | Space: object requires documentation | |
464 | ![]() |
The technical name is not in the customer name range | Space: object requires documentation | |
465 | ![]() |
RFC error: & | Space: object requires documentation | |
466 | ![]() |
The row may not be smaller than 1 | Space: object requires documentation | |
467 | ![]() |
The row may not be larger than 9 | Space: object requires documentation | |
468 | ![]() |
The output position may not be smaller than 0 | Space: object requires documentation | |
469 | ![]() |
The output position may not be larger than 85 | Space: object requires documentation | |
470 | ![]() |
The output length may not be smaller than 1 | Space: object requires documentation | |
471 | ![]() |
The output length may not be larger than 85 | Space: object requires documentation | |
472 | ![]() |
No inconsistencies found | Space: object requires documentation | |
473 | ![]() |
Application component & reassigned | Space: object requires documentation | |
474 | ![]() |
InfoArea & reassigned | Space: object requires documentation | |
475 | ![]() |
InfoPackage group & reassigned | Space: object requires documentation | |
476 | ![]() |
You can only book data manually when status is red | Space: object requires documentation | |
477 | ![]() |
You can only cancel data when status is green | Space: object requires documentation | |
478 | ![]() |
Data packet number is blank; Value not permitted | Space: object requires documentation | |
479 | ![]() |
Further update of request from PSA started | Space: object requires documentation | |
480 | ![]() |
Incorrect data packets are now updated again. | Space: object requires documentation | |
481 | ![]() |
No hierarchy headers exist. Create at least one header | Space: object requires documentation | |
482 | ![]() |
Please select a node in a tree | Space: object requires documentation | |
483 | ![]() |
Application component & already exists, please select a new name | Space: object requires documentation | |
484 | ![]() |
Higher-level node & does not exist in the application component hierarchy | The short text describes the object sufficiently | |
485 | ![]() |
Content-object check for & ended with errors | The short text describes the object sufficiently | |
486 | ![]() |
Higher-level node & does not exist in the InfoArea hierarchy | The short text describes the object sufficiently | |
487 | ![]() |
InfoPackage group & already exists; choose a new name | The short text describes the object sufficiently | |
488 | ![]() |
Higher-level node & does not exist in the InfoPackage group hierarchy | The short text describes the object sufficiently | |
489 | ![]() |
No hierarchies supported by the source system for this InfoSource | Space: object requires documentation | |
490 | ![]() |
The father node was not found in the current tree - Refresh | Space: object requires documentation | |
491 | ![]() |
Tree data refreshed: & | Space: object requires documentation | |
492 | ![]() |
Application component &(&) created | Space: object requires documentation | |
493 | ![]() |
InfoArea &(&) created | Space: object requires documentation | |
494 | ![]() |
Content of InfoCube &(&) deleted | Space: object requires documentation | |
495 | ![]() |
Content of InfoCube &(&) could not be deleted | Space: object requires documentation | |
496 | ![]() |
Application component &(&) deleted (with all nodes below it) | Space: object requires documentation | |
497 | ![]() |
InfoArea &(&) deleted (with all nodes below it) | Space: object requires documentation | |
498 | ![]() |
InfoPackage &(&) deleted | Space: object requires documentation | |
499 | ![]() |
Application component &(&) hidden | Space: object requires documentation | |
500 | ![]() |
InfoSource &(&) hidden | Space: object requires documentation | |
501 | ![]() |
Source system &(&) hidden | Space: object requires documentation | |
502 | ![]() |
All nodes shown | Space: object requires documentation | |
503 | ![]() |
All nodes under application component &(&) shown | Space: object requires documentation | |
504 | ![]() |
Show all nodes under InfoSource &(&) | Space: object requires documentation | |
505 | ![]() |
Application component &(&) renamed & | Space: object requires documentation | |
506 | ![]() |
InfoSource &(&) renamed & | Space: object requires documentation | |
507 | ![]() |
Source system &(&) renamed & | Space: object requires documentation | |
508 | ![]() |
InfoArea &(&) renamed as & | Space: object requires documentation | |
509 | ![]() |
InfoPackage &(&) renamed as & | Space: object requires documentation | |
510 | ![]() |
InfoPackage group &(&) renamed as & | Space: object requires documentation | |
511 | ![]() |
InfoPackage &(&) created | Space: object requires documentation | |
512 | ![]() |
InfoPackage & according to & copied to variant & | Space: object requires documentation | |
513 | ![]() |
InfoPackage group &(&) created | Space: object requires documentation | |
514 | ![]() |
Changed from variant & to variant & | Space: object requires documentation | |
515 | ![]() |
Hierarchy selections deleted | Space: object requires documentation | |
516 | ![]() |
No selected hierarchy available | Space: object requires documentation | |
517 | ![]() |
The data target has not been saved as 'active' | Space: object requires documentation | |
518 | ![]() |
Hierarchy loading not possible as hier./attr. is currently running | Space: object requires documentation | |
519 | ![]() |
Master data loading not possible as hier./attr. is currently running | Space: object requires documentation | |
520 | ![]() |
The appl. component still contains child entries. No deletion possible | Space: object requires documentation | |
521 | ![]() |
The InfoArea still contains child entries. No deletion possible | Space: object requires documentation | |
522 | ![]() |
Hierarchy &(&) created under InfoObject &(&) | Space: object requires documentation | |
523 | ![]() |
IMG-maintenance is only permitted for SAP systems | Space: object requires documentation | |
524 | ![]() |
InfoCube &(&) still contains update rules. No deletion possible | Space: object requires documentation | |
525 | ![]() |
No InfoPackages assigned to this InfoPackage group. | Space: object requires documentation | |
526 | ![]() |
Please fill selections first | Space: object requires documentation | |
527 | ![]() |
InfoPackage & is already assigned to InfoPackage group & | Space: object requires documentation | |
528 | ![]() |
Overlapping selection conditions with InfoPackage & | Space: object requires documentation | |
529 | ![]() |
No InfoCube selected for reversal; action terminated | Space: object requires documentation | |
530 | ![]() |
Change/update metadata is only recommended globally for SAP systems | Space: object requires documentation | |
531 | ![]() |
Delta update not possible until after initialization of the delta process | Space: object requires documentation | |
532 | ![]() |
Selection conditons replaced by initial selection conditions | Space: object requires documentation | |
533 | ![]() |
Check: No successful initialization of the delta update took place | Space: object requires documentation | |
534 | ![]() |
The last delta update contained errors. No new delta update possible. | Space: object requires documentation | |
535 | ![]() |
Please highlight a row with the mark column | Space: object requires documentation | |
536 | ![]() |
Available deletion selections deleted | Space: object requires documentation | |
537 | ![]() |
Simulated hierarchies can not be edited | Space: object requires documentation | |
538 | ![]() |
Incorrect data packet number & for the simulation mode | Space: object requires documentation | |
539 | ![]() |
Error when reading IDoc & | Space: object requires documentation | |
540 | ![]() |
All requests aggregated; no further need for aggregation | Space: object requires documentation | |
541 | ![]() |
Request identifier is too small, please use F4 | Space: object requires documentation | |
542 | ![]() |
Request identifier is too large, please use F4 | Space: object requires documentation | |
543 | ![]() |
No requests selected for the reconstruction; action terminated | Space: object requires documentation | |
544 | ![]() |
Request & properly ended; no further processing allowed | Space: object requires documentation | |
545 | ![]() |
Hierarchy & activated successfully | Space: object requires documentation | |
546 | ![]() |
Transport request created | Space: object requires documentation | |
547 | ![]() |
Change and Transport Organizer switched on (please see long text) | Space: object requires documentation | |
548 | ![]() |
Change and Transport Organizer switched off (please see long text) | Space: object requires documentation | |
549 | ![]() |
No requests selected; action terminated | Space: object requires documentation | |
550 | ![]() |
Unrecoverable error when deleting an old background job | Space: object requires documentation | |
551 | ![]() |
Background job & is currently running | Space: object requires documentation | |
552 | ![]() |
Cannot activate job &1 (return code &2) | Space: object requires documentation | |
553 | ![]() |
Program &3 successfully scheduled as job &1 with ID &2 | Space: object requires documentation | |
554 | ![]() |
Background processing already running. Cancelation no longer possible. | Space: object requires documentation | |
555 | ![]() |
No full update allowed | Space: object requires documentation | |
556 | ![]() |
No initialization of the delta transfer allowed | Space: object requires documentation | |
557 | ![]() |
No repetition of the transfer of a data package allowed | Space: object requires documentation | |
558 | ![]() |
No transfer of an opening balance allowed for cumulative values | Space: object requires documentation | |
559 | ![]() |
No delta update transfer possible | Space: object requires documentation | |
560 | ![]() |
The IDocs must be processed individually in the source system | Space: object requires documentation | |
561 | ![]() |
The IDocs can only be processed individually in the simulation mode | Space: object requires documentation | |
562 | ![]() |
Please do not enter any identical start numbers | Space: object requires documentation | |
563 | ![]() |
Do not process request as the previous one is not error-free or finished | Space: object requires documentation | |
564 | ![]() |
You have switched to the SAP name range | Space: object requires documentation | |
565 | ![]() |
You have switched to the customer name range | Space: object requires documentation | |
566 | ![]() |
No selection conditions are available for packet & yet | Space: object requires documentation | |
567 | ![]() |
You have not yet entered a start time | Space: object requires documentation | |
568 | ![]() |
User-dependent storage of the Workbench for user & deleted | Space: object requires documentation | |
569 | ![]() |
No more storages of the Workbench available for user & | Space: object requires documentation | |
570 | ![]() |
Request number is blank; logs are not available | Space: object requires documentation | |
571 | ![]() |
No roll-up possible after InfoCube request & | Space: object requires documentation | |
572 | ![]() |
Select one line only | Space: object requires documentation | |
573 | ![]() |
Job & is currently running | Space: object requires documentation | |
574 | ![]() |
Job & cannot be deleted; action terminated | Space: object requires documentation | |
575 | ![]() |
Request ID & is aggregated, compressed or scheduled | Space: object requires documentation | |
576 | ![]() |
Scheduling undone | Space: object requires documentation | |
577 | ![]() |
Request number is initial; processing terminated | Space: object requires documentation | |
578 | ![]() |
Simulation mode being switched on, as individual packet reversal not poss | Space: object requires documentation | |
579 | ![]() |
Please select the records for which the reversal should be simulated | Space: object requires documentation | |
580 | ![]() |
This request has already been reversed; termination | Space: object requires documentation | |
581 | ![]() |
No InfoCube and no check table were selected | Space: object requires documentation | |
582 | ![]() |
Delta transfer for texts is not possible for this InfoObject | Space: object requires documentation | |
583 | ![]() |
Deletion of the InfoCube contents & scheduled when loading data | Space: object requires documentation | |
584 | ![]() |
InfoCube content & deleted | Space: object requires documentation | |
585 | ![]() |
InfoCube & roll-up: 'From' request ID & 'To' request ID & | Space: object requires documentation | |
586 | ![]() |
Roll-up scheduling for InfoCube & undone: From & to & | Space: object requires documentation | |
587 | ![]() |
Deletion scheduling for InfoCube & request ID & undone | Space: object requires documentation | |
588 | ![]() |
Request ID & from data target & scheduled for deletion | Space: object requires documentation | |
589 | ![]() |
Delete request ID & from InfoCube & when requesting data | Space: object requires documentation | |
590 | ![]() |
Reconstruction scheduled for InfoCube & | Space: object requires documentation | |
591 | ![]() |
Scheduled reconstruction of InfoCube & undone | Space: object requires documentation | |
592 | ![]() |
& terminated, as data package & could not be locked | Space: object requires documentation | |
593 | ![]() |
& terminated since no scheduled job/worklist & was found | Space: object requires documentation | |
594 | ![]() |
& is running: Data target &, from & to & | Space: object requires documentation | |
595 | ![]() |
& is finished: Data target &, from & to & | Space: object requires documentation | |
596 | ![]() |
& was successful: Data target &, from & to & | Space: object requires documentation | |
597 | ![]() |
& terminated: Data target &, from & to & | Space: object requires documentation | |
598 | ![]() |
Rollup is not possible; no filled aggregates exist for InfoCube & | Space: object requires documentation | |
599 | ![]() |
Deletion of request ID & not possible as already aggregated | Space: object requires documentation | |
600 | ![]() |
Internal error when reading the InfoObject | The short text describes the object sufficiently | |
601 | ![]() |
No hierarchies are allowed for this InfoObject | Space: object requires documentation | |
602 | ![]() |
Internal error when reading the hierarchy | The short text describes the object sufficiently | |
603 | ![]() |
Hierarchy was deleted | The short text describes the object sufficiently | |
604 | ![]() |
Error when deleting the hierarchy | The short text describes the object sufficiently | |
605 | ![]() |
InfoArea & already exists; please select a new name | Space: object requires documentation | |
606 | ![]() |
No further selections possible for BAPIs. | Space: object requires documentation | |
607 | ![]() |
Request & updated in InfoCube & | Space: object requires documentation | |
608 | ![]() |
Reconstruction canceled: InfoCubes & requests & | Space: object requires documentation | |
609 | ![]() |
Start processing log: InfoCube & request & data packet & | Space: object requires documentation | |
610 | ![]() |
Finish processing log: InfoCube & request & data packet & | Space: object requires documentation | |
611 | ![]() |
Processing ok: InfoCube & request & data paket & | Space: object requires documentation | |
612 | ![]() |
Error when processing: InfoCube & request & data packet & | Space: object requires documentation | |
613 | ![]() |
Reconstruction / addition started for InfoCube & | Space: object requires documentation | |
614 | ![]() |
Reverse posting started for InfoCube & request & | Space: object requires documentation | |
615 | ![]() |
Reverse posting canceled: InfoCubes & requests & | Space: object requires documentation | |
616 | ![]() |
& for InfoCube & finished | Space: object requires documentation | |
617 | ![]() |
The request is already reversed in InfoCube & | Space: object requires documentation | |
618 | ![]() |
The request is not contained in any InfoCube; no reverse posting possible | Space: object requires documentation | |
619 | ![]() |
Aggregate & is not active. No roll-up possible | Space: object requires documentation | |
620 | ![]() |
Remove inactive aggregates from scheduling | Space: object requires documentation | |
621 | ![]() |
Inactive aggregates and current jobs removed | Space: object requires documentation | |
622 | ![]() |
Aggregation of aggregate &(&) from InfoCube & successful | Space: object requires documentation | |
623 | ![]() |
Error when reaggregating aggregate &(&) from InfoCube & | Space: object requires documentation | |
624 | ![]() |
Aggregate & no longer exists (in InfoCube &) | Space: object requires documentation | |
625 | ![]() |
No valid request available for roll-up | Space: object requires documentation | |
626 | ![]() |
Invalid InfoSource definition; no update mode can be selected | Space: object requires documentation | |
627 | ![]() |
Check carried out - ok | Space: object requires documentation | |
628 | ![]() |
Error: & | Space: object requires documentation | |
629 | ![]() |
Error when calling up the IMG in source system & | Space: object requires documentation | |
630 | ![]() |
No input help available | Space: object requires documentation | |
631 | ![]() |
Please enter a technical name for your new InfoCube | Space: object requires documentation | |
632 | ![]() |
InfoCube & already exists, please select a new name | Space: object requires documentation | |
633 | ![]() |
InfoCube & does not exist. You cannot use it as a reference | Space: object requires documentation | |
634 | ![]() |
Explanation of the icons in the InfoSource tree | Space: object requires documentation | |
635 | ![]() |
Explanation of the icons in the InfoCube tree | Space: object requires documentation | |
636 | ![]() |
Explanation of the icons in the InfoObject tree | Space: object requires documentation | |
637 | ![]() |
InfoCube request ID & is already scheduled: no aggregation possible | Space: object requires documentation | |
638 | ![]() |
Explanation of the icons in the source system tree, see long text ! | Space: object requires documentation | |
639 | ![]() |
Reversal currently running; termination was initiated | Space: object requires documentation | |
640 | ![]() |
Hier./attr. change cannot be started again as one is currently running | Space: object requires documentation | |
641 | ![]() |
Requesting the last delta for texts is not supported | Space: object requires documentation | |
642 | ![]() |
Requesting the last delta for master data is not supported | Space: object requires documentation | |
643 | ![]() |
No IDoc that can be updated found; termination carried out | Space: object requires documentation | |
644 | ![]() |
Hierarchy/attribute change successfully carried out | Space: object requires documentation | |
645 | ![]() |
Termination of change to the hierarchies/attributes | Space: object requires documentation | |
646 | ![]() |
InfoCube & is not active; InfoSource generation from InfoCube impossible | Space: object requires documentation | |
647 | ![]() |
Error appeared in the source system; Carry out last step (again if necc.) | Space: object requires documentation | |
648 | ![]() |
Function cannot be executed on this node | Space: object requires documentation | |
649 | ![]() |
Error: & & & & | Space: object requires documentation | |
650 | ![]() |
Double click function not supported here | Space: object requires documentation | |
651 | ![]() |
Right mouse button not supported on this node | Space: object requires documentation | |
652 | ![]() |
Search not possible. Select a node in the tree | Space: object requires documentation | |
653 | ![]() |
You are only allowed to drag InfoPackages and InfoPackage groups | Space: object requires documentation | |
654 | ![]() |
InfoPackage can only be moved to InfoPackages and InfoPackage groups | Space: object requires documentation | |
655 | ![]() |
Moving InfoPackage groups using Drag&Drop not supported | Space: object requires documentation | |
656 | ![]() |
Search interrupted | Space: object requires documentation | |
657 | ![]() |
Monitor call-up only possible after selection of a node | Space: object requires documentation | |
658 | ![]() |
Please enter the name of the file that should be loaded | Space: object requires documentation | |
659 | ![]() |
No mapping defined for source system & | Space: object requires documentation | |
660 | ![]() |
Source system & does not exist | Space: object requires documentation | |
661 | ![]() |
InfoPackage &, source system & changed by source system & in import | Space: object requires documentation | |
662 | ![]() |
&1 terminated, because InfoCube/DSO object &2 could not be locked | Space: object requires documentation | |
663 | ![]() |
& terminated, as no locking currently possible | Space: object requires documentation | |
664 | ![]() |
No active version of InfoCube & found; no detail output possible | Space: object requires documentation | |
665 | ![]() |
00H not allowed as separator entry | Space: object requires documentation | |
666 | ![]() |
Incorrect parameter transfer to FM rsar_is_ls_get_single | ||
667 | ![]() |
'Space' and 00H not allowed as escape entry | Space: object requires documentation | |
668 | ![]() |
Source system &1 does not exist; InfoPackage &2 deleted | Space: object requires documentation | |
669 | ![]() |
Compress InfoCube &: From request ID & to request ID & | Space: object requires documentation | |
670 | ![]() |
Object names cannot start with a '0' in the customer name range | Space: object requires documentation | |
671 | ![]() |
Request & is already available in InfoCube/DSO &; Not added | Space: object requires documentation | |
672 | ![]() |
Request & already reversed in InfoCube &; no reversal possible | Space: object requires documentation | |
673 | ![]() |
Aggregation of InfoCube & not executed; To-Request-ID & | Space: object requires documentation | |
674 | ![]() |
Reaggregation of aggregate & from InfoCube & scheduled | Space: object requires documentation | |
675 | ![]() |
Internal error occurred; maximum number of sessions may have been reached | Space: object requires documentation | |
676 | ![]() |
Please enter the start time for the hierarchy/attribute change | Space: object requires documentation | |
677 | ![]() |
Please maintain source system object catalog entries in InfoSource cat. | Space: object requires documentation | |
678 | ![]() |
There are no object catalog entries for hierarchies in the DWB | Space: object requires documentation | |
679 | ![]() |
Please place cursor on a node in the Workbench | Space: object requires documentation | |
680 | ![]() |
* Authorizations in Data Warehousing Workbench ************************** | Space: object requires documentation | |
681 | ![]() |
You do not have authorization for the DWB object | Space: object requires documentation | |
682 | ![]() |
You do not have authorization for InfoSource &2 | Space: object requires documentation | |
683 | ![]() |
You do not have authorization for InfoCube &2 | Space: object requires documentation | |
684 | ![]() |
InfoCube & is not active | Space: object requires documentation | |
685 | ![]() |
You do not have authorization for hierarchy &2 | Space: object requires documentation | |
686 | ![]() |
You only have authorization to display InfoSource &2 | Space: object requires documentation | |
687 | ![]() |
You only have authorization to display hierarchy &2 | Space: object requires documentation | |
688 | ![]() |
You only have authorization to display InfoCube &2 | Space: object requires documentation | |
689 | ![]() |
You only have authorization to display the aggregates for InfoCube &2 | Space: object requires documentation | |
690 | ![]() |
You have no authorization for working with the aggregates for InfoCube &2 | Space: object requires documentation | |
691 | ![]() |
You do not have authorization for InfoSource &2 | Space: object requires documentation | |
692 | ![]() |
You only have authorization to display InfoSource &2 | Space: object requires documentation | |
693 | ![]() |
Error when deleting the request ID & of InfoCube & | Space: object requires documentation | |
694 | ![]() |
Recreation IC &: Request ID & is less than rollup-ID &; no insertion | Space: object requires documentation | |
695 | ![]() |
InfoObject catalog & already exists; please select a new technical name | Space: object requires documentation | |
696 | ![]() |
Creating time characteristics is not supported at present | Space: object requires documentation | |
697 | ![]() |
Incorrect start date: &1; Start time &2 | Space: object requires documentation | |
698 | ![]() |
New aggregation for aggregate &(&) for InfoCube & started | Space: object requires documentation | |
699 | ![]() |
New aggregation for aggregates in InfoCube & successfully completed | Space: object requires documentation | |
700 | ![]() |
* Workflow messages ************************************************** | Space: object requires documentation | |
701 | ![]() |
Inconsistency in table & for request no. & | Space: object requires documentation | |
702 | ![]() |
Monitor could not be called up for request no. & | Space: object requires documentation | |
703 | ![]() |
No IDoc number available for Workflow | Space: object requires documentation | |
704 | ![]() |
Refresh of the display terminated because InfoCube/DSO cannot be locked | Space: object requires documentation | |
705 | ![]() |
You only have authorization to display MultiProvider &1 | The short text describes the object sufficiently | |
706 | ![]() |
You have no authorization for MultiProvider &1 | The short text describes the object sufficiently | |
707 | ![]() |
Errors when reading the InfoArea for MultiProvider &1 | The short text describes the object sufficiently | |
708 | ![]() |
Could not create job &1; error &2 | The short text describes the object sufficiently | |
709 | ![]() |
An upload from the client workstation in the background is not possible | Space: object requires documentation | |
710 | ![]() |
No selections exist yet for InfoPackage &; | Space: object requires documentation | |
711 | ![]() |
InfoCube request ID & is already scheduled; No compression is possible | Space: object requires documentation | |
712 | ![]() |
All requests compressed, No further need for compression | Space: object requires documentation | |
713 | ![]() |
No valid request exists for compressing | Space: object requires documentation | |
714 | ![]() |
No active PSA exists on TRFC basis | Space: object requires documentation | |
715 | ![]() |
Request not added successfully; Registry from PSA not possible | Space: object requires documentation | |
716 | ![]() |
Hierarchy & has been marked for activation | Space: object requires documentation | |
717 | ![]() |
Selection variant & saved | Space: object requires documentation | |
718 | ![]() |
Selection variant & deleted | Space: object requires documentation | |
719 | ![]() |
You are authorized only to display master data | Space: object requires documentation | |
720 | ![]() |
You are not authorized for master data | Space: object requires documentation | |
721 | ![]() |
You only have authorization to display DSO object &2 | Space: object requires documentation | |
722 | ![]() |
You do not have authorization for DSO object &2 | Space: object requires documentation | |
723 | ![]() |
Unable to select any entries in the lock log | Space: object requires documentation | |
724 | ![]() |
There are no entries available from the lock log | Space: object requires documentation | |
725 | ![]() |
An error occurred during the selection process | Space: object requires documentation | |
726 | ![]() |
Unable to read detailed information | Space: object requires documentation | |
727 | ![]() |
Please contact your system administrator. | ||
728 | ![]() |
You are not authorized for InfoObject &1 | Space: object requires documentation | |
729 | ![]() |
You only have authorization to display InfoObjects | Space: object requires documentation | |
730 | ![]() |
You only have authorization to display InfoObject &1. | Space: object requires documentation | |
731 | ![]() |
Parameter InfoObjectCatalog was not filled. | Space: object requires documentation | |
732 | ![]() |
The organization criterium does not exist or is not active. | Space: object requires documentation | |
733 | ![]() |
There are no restrictions on the individual table rows. | Space: object requires documentation | |
734 | ![]() |
You do not have authorization for table &1. | Space: object requires documentation | |
735 | ![]() |
An internal error occurred during the authorization check. | Space: object requires documentation | |
736 | ![]() |
Invalid parameter. | Space: object requires documentation | |
737 | ![]() |
You have no authorization for InfoObject catalog &1 | Space: object requires documentation | |
738 | ![]() |
You only have authorization to display InfoObject catalog &1 | Space: object requires documentation | |
739 | ![]() |
Query with ID &1 does not exist | The short text describes the object sufficiently | |
740 | ![]() |
You are not authorized to maintain DataSource &1 | Space: object requires documentation | |
741 | ![]() |
You are not authorized to display DataSource &1 | Space: object requires documentation | |
742 | ![]() |
You have no authorization for DataSource &1 | Space: object requires documentation | |
743 | ![]() |
You are not authorized to maintain the transformation rule | Space: object requires documentation | |
744 | ![]() |
You are not authorized to display the transformation rule | Space: object requires documentation | |
745 | ![]() |
You have no authorization for the transformation rule | Space: object requires documentation | |
746 | ![]() |
You are not authorized to maintain the data transfer process | Space: object requires documentation | |
747 | ![]() |
You are not authorized to display the data transfer process | Space: object requires documentation | |
748 | ![]() |
You do not have authorization for the data transfer process | Space: object requires documentation | |
749 | ![]() |
You are not authorized to maintain the InfoSource | Space: object requires documentation | |
750 | ![]() |
You are not authorized to display the InfoSource | Space: object requires documentation | |
751 | ![]() |
You do not have authorization for the InfoSource | Space: object requires documentation | |
752 | ![]() |
You do not have authorization to maintain the routine | Space: object requires documentation | |
753 | ![]() |
You do not have authorization to display the routine | Space: object requires documentation | |
754 | ![]() |
You do not have authorization for the routine | Space: object requires documentation | |
755 | ![]() |
Not all parameters transferred for authorization check | Space: object requires documentation | |
756 | ![]() |
Error while determining application component for process chain &1 | The short text describes the object sufficiently | |
757 | ![]() |
You are not authorized to maintain process chain &1 | Space: object requires documentation | |
758 | ![]() |
You are not authorized to display process chain &1 | Space: object requires documentation | |
759 | ![]() |
You do not have authorization for process chain &1 | Space: object requires documentation | |
760 | ![]() |
You are not authorized to maintain open hub destination &1 | Space: object requires documentation | |
761 | ![]() |
You are not authorized to display open hub destination &1 | Space: object requires documentation | |
762 | ![]() |
You do not have authorization for the open hub destination &1 | Space: object requires documentation | |
763 | ![]() |
There are currently no routines or BEx variables - check is not useful | The short text describes the object sufficiently | |
764 | ![]() |
Error while determining the TLOGO class | The short text describes the object sufficiently | |
765 | ![]() |
Method for checking authorizations is not implemented | The short text describes the object sufficiently | |
766 | ![]() |
You have no authorization for object &1 | The short text describes the object sufficiently | |
767 | ![]() |
You only have display authorization for object &1 | The short text describes the object sufficiently | |
768 | ![]() |
Original request & wrote no records to cube &; cancellation terminated | The short text describes the object sufficiently | |
769 | ![]() |
Cannot create hierarchy header in RSOSOHIE for DS & LS & InfoPackage & | The short text describes the object sufficiently | |
770 | ![]() |
You are not authorized to maintain the broadcast settings (&1) | The short text describes the object sufficiently | |
771 | ![]() |
You are not authorized to display the broadcast settings (&1) | The short text describes the object sufficiently | |
772 | ![]() |
You have no authorization for the broadcast settings (&1) | The short text describes the object sufficiently | |
773 | ![]() |
You do not have data administration authorization for DataSource &1 | Space: object requires documentation | |
774 | ![]() |
Internal error -> Create message (BW-WHM-DST) | Space: object requires documentation | |
775 | ![]() |
AWB temporarily unavailable ! - Removing errors ! | Space: object requires documentation |
History
Last changed on/by | ![]() |
20130531 | SAP |
SAP Release Created in |