SAP ABAP Message Class O3 (IS-Oil: HPM messages (goods movements, QCI, deliveries))

Basic Data

Hierarchy

☛ IS-OIL (Software Component) IS-OIL
   ⤷ IS-OIL (Application Component) Industry Solution Oil
     ⤷ OIB_QCI (Package) QCI Quantity Conversion Interface

Attributes

Message class	O3
Short Description	IS-Oil: HPM messages (goods movements, QCI, deliveries)
Changed On	20110810
Last Changed At	143332

Messages

#	Message	Message Short Text	Documentation status	Authorization check
1	000	Volume correction factor is zero or negative: inconsistent customizing	Space: object requires documentation	☐
2	001	Invalid working status		☐
3	002	Invalid conversion mode		☐
4	003	Error in the Quantity Conversion Interface (QCI)	Space: object requires documentation	☐
5	004	Transaction & is missing from Table T180	The short text describes the object sufficiently	☐
6	005	Entry with the same key already exists	Space: object requires documentation	☐
7	006	Chemical analysis data fraction is not in the correct format	Space: object requires documentation	☐
8	007	Target quantity &1 &2 and transaction quantity &3 &4 have opposite signs	Space: object requires documentation	☐
9	008	Volume dimension has to be defined in Table T006D	Space: object requires documentation	☐
10	009	Mass dimension has not been defined in Table T006D	Space: object requires documentation	☐
11	010	Material/plant/storage location/batch combination does not exist	The short text describes the object sufficiently	☐
12	011	Transaction or function is only available for oil materials	Space: object requires documentation	☐
13	012	All bulk materials require quantity conversion; maintain item &	Space: object requires documentation	☐
14	013	Storage location not defined	Space: object requires documentation	☐
15	014	Item not picked yet; conversion not possible	Space: object requires documentation	☐
16	015	Material master not maintained correctly for IS-OIL		☐
17	016	Step is not allowed for non-oil materials	Space: object requires documentation	☐
18	017	Parameters are outside allowed ranges	Space: object requires documentation	☐
19	018	Plant/material combination does not exist	The short text describes the object sufficiently	☐
20	019	Material/plant and storage location combination does not exist	The short text describes the object sufficiently	☐
21	020	UoM group & assigned to a material; not possible to change or delete	Space: object requires documentation	☐
22	021	Manually-entered quantity in & is within the high-warning range	Space: object requires documentation	☐
23	022	Manually-entered quantity in & is outside the error range tolerance (low)	Space: object requires documentation	☐
24	023	Manually-entered quantity in & is outside the error range tolerance(high)	Space: object requires documentation	☐
25	024	Manually-entered quantity in & is within the low warning range	Space: object requires documentation	☐
26	025	Quantity Conversion Interface: import or export table & not defined	Space: object requires documentation	☐
27	026	Quantity Conversion Interface: CALL SYSTEM - command line too long	Space: object requires documentation	☐
28	027	Quantity Conversion Interface: conversion exit routine & not found	Space: object requires documentation	☐
29	028	Quantity Conversion Interface: error in structure &	Space: object requires documentation	☐
30	029	Quantity Conversion Interface: diff. parameters for table & conv. group &	Space: object requires documentation	☐
31	030	Quantity Conversion Interface: Field OIB04-FMTYP: & not in range	Space: object requires documentation	☐
32	031	Quantity Conversion Interface: No response from external programs	Space: object requires documentation	☐
33	032	Quantity Conversion Interface: Func. Module Subroutine & not responding	Space: object requires documentation	☐
34	033	Base UoM & not consistent with document base UoM &	The short text describes the object sufficiently	☐
35	034	Quantity Conversion Interface: Import parameters <> program parameters	Space: object requires documentation	☐
36	035	Quantity Conversion Interface: export parameters <> ext. prog. parameters	Space: object requires documentation	☐
37	036	Unit of measure for SI unit Kilogram not defined in Table T006	Space: object requires documentation	☐
38	037	Unit of measure for SI unit cubic meter is not defined in Table T006	Space: object requires documentation	☐
39	038	Quantity Conversion Interface: Error in external function/customer module	Space: object requires documentation	☐
40	039	Update of appendix tables not possible; MSEGO2 documents are missing	Space: object requires documentation	☐
41	040	Defaults have not been changed; saving is not necessary	Space: object requires documentation	☐
42	041	Manually entered quantities have been reset and will be recalculated		☐
43	042	Quantity Conversion Interface: Field & is too long	Space: object requires documentation	☐
44	043	Delivery quantity is not defined for item &	Space: object requires documentation	☐
45	044	Unit of measure does not have the dimension of a temperature	Space: object requires documentation	☐
46	045	Quantity conversion defaults are reset and quantities are recalculated	Space: object requires documentation	☐
47	046	Quantity overflow; & is larger than 9,999,999,999.999	Space: object requires documentation	☐
48	047	Dimension "dimensionless" is missing in Table T006D	Space: object requires documentation	☐
49	048	Dimension "temperature" is missing in Table T006D	Space: object requires documentation	☐
50	049	Material & not maintained in the material master	Space: object requires documentation	☐
51	050	Plant & not maintained in the plant master		☐
52	051	Storage location is not maintained for this material	Space: object requires documentation	☐
53	052	The quantity table to be calculated has no entries		☐
54	053	The quantity table to be calculated contains duplicate entries	Space: object requires documentation	☐
55	054	Unit of measure does not have the dimension of a pressure	Space: object requires documentation	☐
56	055	Density cannot be zero; enter a value greater than zero as density value	Space: object requires documentation	☐
57	056	No unit of measure group is assigned to & and &	Space: object requires documentation	☐
58	057	Unit of measure & not maintained in Customizing	Space: object requires documentation	☐
59	058	Plant, material and date cannot be blank for default deter./creation	The short text describes the object sufficiently	☐
60	059	Gross weight recalculated to & &; previous value was & &	Space: object requires documentation	☐
61	060	Batch has not been maintained for the material	Space: object requires documentation	☐
62	061	Invalid material master record &	Space: object requires documentation	☐
63	062	Oil quantity conversion cancelled	Space: object requires documentation	☐
64	063	Compression factor = 1 is used for chosen set of base conditions	Space: object requires documentation	☐
65	064	Plant is required for the Quantity Conversion Interface (QCI) conversion	Space: object requires documentation	☐
66	065	&	The short text describes the object sufficiently	☐
67	066	Dimension "energy" is missing in Table T006D	Space: object requires documentation	☐
68	067	No additional unit of measure quantity available for the item	Space: object requires documentation	☐
69	068	Conversion group & is assigned to a material and cannot be deleted	Space: object requires documentation	☐
70	069	Conversion group X..., Y..., Z... is reserved for customer name ranges	Space: object requires documentation	☐
71	070	Conversion group & reserved for SAP, use X..., Y..., Z...	Space: object requires documentation	☐
72	071	Conversion group already assigned to a material		☐
73	072	Conversion group & not defined in Customizing	Space: object requires documentation	☐
74	073	Source UoM group & not identical to target UoM group &	Space: object requires documentation	☐
75	074	Manually-entered quantity affects other quantities that were calculated		☐
76	075	Fixed & is missing for materials with product type 3 ("Chemicals")	Space: object requires documentation	☐
77	076	Thermal expansion coefficient is required for Material	Space: object requires documentation	☐
78	077	Unit of measure & not allowed for oil or natural gas quantities	Space: object requires documentation	☐
79	078	BSW % fraction cannot be less than zero or greater than 100 %	Space: object requires documentation	☐
80	079	Unrealistic BSW % value greater than 10%	Space: object requires documentation	☐
81	080	Enter a numeric value	The short text describes the object sufficiently	☐
82	081	The quantity table contains an entry with an invalid unit of measure	Space: object requires documentation	☐
83	082	The material/plant/storage location/batch/date range does not exist	The short text describes the object sufficiently	☐
84	083	Quantity Conversion Interface: More than & parameters for FMTYTP &	Space: object requires documentation	☐
85	084	Insert Table OIB03 Key &1 &2 &3 &4 failed	The short text describes the object sufficiently	☐
86	085	Delete Table OIB03 Key &1 &2 &3 &4 failed		☐
87	086	Update flag & for Table OIB03 unknown	The short text describes the object sufficiently	☐
88	087	Oil conversion default has been created	The short text describes the object sufficiently	☐
89	088	Oil conversion default has been changed	The short text describes the object sufficiently	☐
90	089	Oil conversion default has been deleted	The short text describes the object sufficiently	☐
91	090	Defaults not maintained for & & & & on OIB03 in the selected time frame	Space: object requires documentation	☐
92	091	'To date' & is more recent than 'from date' &	The short text describes the object sufficiently	☐
93	092	Table OIB09 contains entries from user &; no update possible	Space: object requires documentation	☐
94	093	Attention: Documents have been archived ! Results may be incorrect !	Space: object requires documentation	☐
95	094	Dimension "pressure" is missing in Table T006D	Space: object requires documentation	☐
96	095	Dimension "heating value (volume)" is missing in Table T006D	Space: object requires documentation	☐
97	096	Dimension "density" is missing in Table T006D	Space: object requires documentation	☐
98	097	SI unit for dimension "energy" not found in Table T006	Space: object requires documentation	☐
99	098	Defaults not maintained in Table OIB03	Space: object requires documentation	☐
100	100	Starting year is greater than year of period to be checked	Space: object requires documentation	☐
101	101	Starting month is greater than month of period to be checked (same year)	Space: object requires documentation	☐
102	102	Update of document & failed	The short text describes the object sufficiently	☐
103	103	Material has to be passed for the quantity conversion	Space: object requires documentation	☐
104	104	Table OIB08 contains entries from user &; no update possible	Space: object requires documentation	☐
105	106	SI unit for dimension "heating value" not found in Table T006	Space: object requires documentation	☐
106	107	The Oil BOM cost indicator can only be set for Oil BOMs	The short text describes the object sufficiently	☐
107	108	Oil BOM item cat. has to have same settings for hdr and comp. item cat.	Space: object requires documentation	☐
108	109	No posting period found for company code &	The short text describes the object sufficiently	☐
109	110	Company code & not valid	The short text describes the object sufficiently	☐
110	111	& inactive default set will be saved and must be activated before use	Space: object requires documentation	☐
111	112	Maximum number of tanks that are allowed per storage location reached	Space: object requires documentation	☐
112	113	No default sets found for selection	Space: object requires documentation	☐
113	114	Enter material document and year OR material OR plant	The short text describes the object sufficiently	☐
114	115	No materials selected	The short text describes the object sufficiently	☐
115	116	No plant found	The short text describes the object sufficiently	☐
116	117	Parameter &1 doesn't exist in the reading group &2.	Space: object requires documentation	☐
117	118	No documentation exists for this field	Space: object requires documentation	☐
118	119	Mandatory field: you cannot leave the field blank, enter data	Space: object requires documentation	☐
119	120	Enter at least one valid plant	The short text describes the object sufficiently	☐
120	121	Oil content cannot be greater than 100%		☐
121	122	Unit of measure group does not correspond with excise duty tax group	Space: object requires documentation	☐
122	123	Unit of measure group does not exist	Space: object requires documentation	☐
123	124	No valid entry found in Table &	Space: object requires documentation	☐
124	125	No company codes exist in Table T001K		☐
125	126	SI unit for "density" dimension not found in Table T006	Space: object requires documentation	☐
126	127	SI unit for "temperature" dimension not found in Table T006	Space: object requires documentation	☐
127	128	SI unit for dimension 'pressure' not found in Table T006	Space: object requires documentation	☐
128	129	Temperature value is not in the correct format	Space: object requires documentation	☐
129	130	& is not in the correct format	Space: object requires documentation	☐
130	131	Quantity & is not in the correct format	Space: object requires documentation	☐
131	132	Temperature unit & not valid		☐
132	133	There are entries in OIB08	Space: object requires documentation	☐
133	134	Other plants have posted stock and no excise duty group		☐
134	135	Oil content cannot be zero if an excise duty group is assigned	Space: object requires documentation	☐
135	136	Unit of measure & is not defined within the delivery or UoM group		☐
136	137	You cannot maintain an oil content % without an excise duty tax group	Space: object requires documentation	☐
137	138	Coefficient and fixed density/gravity only allowed for chemicals	Space: object requires documentation	☐
138	140	Enter at least one valid material	Space: object requires documentation	☐
139	141	Unit of measure & does not exist in this UoM group (BTCI)	The short text describes the object sufficiently	☐
140	142	Key specified for this entry does not exist	The short text describes the object sufficiently	☐
141	143	Air Bouyancy factor not maintained: Air buoyancy indicator is reset	Space: object requires documentation	☐
142	144	Starting month is greater/eq. than actual period month of company code &	Space: object requires documentation	☐
143	145	Month of period to be checked is greater/equal than act.month of c.code &	Space: object requires documentation	☐
144	146	You already entered the same date you now want to set	The short text describes the object sufficiently	☐
145	147	Stock quantity for selected UoM is calculated using mat.master conversion	Space: object requires documentation	☐
146	148	No conversion group assigned to material &, defaults cannot be maintained	The short text describes the object sufficiently	☐
147	149	Year of period to be checked is greater than curr. year of company code &	Space: object requires documentation	☐
148	150	For field &, field content & is not allowed	The short text describes the object sufficiently	☐
149	151	No entries for unit of measure group & found in customizing table	Space: object requires documentation	☐
150	153	Starting year is greater than current year of company code &	Space: object requires documentation	☐
151	155	Air buoyancy factor not maintained in MARC for material &, plant &	Space: object requires documentation	☐
152	156	Unit of measure & does not exist in the unit of measure table	Space: object requires documentation	☐
153	157	All quantities are zero		☐
154	158	Function not defined for a non-oil material		☐
155	159	Tolerance level is not in the correct format	The short text describes the object sufficiently	☐
156	160	Unit of measure & is not consistent	Space: object requires documentation	☐
157	164	Quantity recalculation was not carried out	Space: object requires documentation	☐
158	165	No conversion mode maintained in Customizing	Space: object requires documentation	☐
159	166	Pressure value is not in the correct format	The short text describes the object sufficiently	☐
160	167	Additional quantity in & not found, internal processing error	Space: object requires documentation	☐
161	169	Table OIB09 could not be locked!	Space: object requires documentation	☐
162	170	Oil BOM component and header density cannot be different	Space: object requires documentation	☐
163	171	Condition VPRS determined finally during saving of the activity		☐
164	172	Oil BOM header material has to be either a TDP or HPM material	The short text describes the object sufficiently	☐
165	173	Combination TDP/Oil BOM header and HPM/Oil BOM components not allowed	Space: object requires documentation	☐
166	174	Cost summation cannot be carried out for oil BoM header item &	Space: object requires documentation	☐
167	175	Enter density type before assigning a unit of measure to conversion group	The short text describes the object sufficiently	☐
168	176	Incorrect dimension: enter a dimensionless unit of measure	The short text describes the object sufficiently	☐
169	177	Incorrect dimension: enter a unit of measure with dimension density	The short text describes the object sufficiently	☐
170	178	Dimension "heating value (molar)" not found in Table T006D	Space: object requires documentation	☐
171	179	Dimension "heating value (mass)" not found in Table T006D	Space: object requires documentation	☐
172	180	Enter a unit of measure with dimension heating value (volume)	The short text describes the object sufficiently	☐
173	181	Enter a unit of measure with dimension heating value (molar)	The short text describes the object sufficiently	☐
174	182	Enter a unit of measure with dimension heating value (mass)	The short text describes the object sufficiently	☐
175	183	Enter the heating value type before you assign a unit of measure	The short text describes the object sufficiently	☐
176	184	Unit of measure has not the correct dimension	The short text describes the object sufficiently	☐
177	186	Unit of measure group required with conversion group or tax group		☐
178	187	Incorrect product type for chosen conversion group	The short text describes the object sufficiently	☐
179	188	Conversion group cannot be changed because of posted stock		☐
180	189	Excise duty tax group cannot be changed due to posted stock		☐
181	190	UoM group cannot be changed because of stock posted		☐
182	191	Conv. grp. cannot be entered because other plants have tax grp./stock		☐
183	192	Other plants exist which do not maintain conversion group	Space: object requires documentation	☐
184	193	Other plants exist which maintain conversion group		☐
185	194	Other plants maintain excise duty tax group		☐
186	195	Other plants exist that do not have excise duty tax group maintained		☐
187	196	UoM group requires a conversion group and/or a tax group	Space: object requires documentation	☐
188	197	Cannot maintain IS-Oil data without a valid plant		☐
189	198	View is already maintained, only IS-Oil data may be maintained	Space: object requires documentation	☐
190	199	Plant & segment already maintained, creation not allowed	Space: object requires documentation	☐
191	200	No heating value has been entered; enter a test heating value	Space: object requires documentation	☐
192	201	No quantity calculation carried out	Space: object requires documentation	☐
193	202	Conv. grp. required, as other plants have conv. grp. and posted stock		☐
194	203	Tax group required, as other plants have tax grp. and stock posted	Space: object requires documentation	☐
195	204	Enter goods issue date for oil quantity conversion calculation	The short text describes the object sufficiently	☐
196	205	Zero count will only be set on the current screen	The short text describes the object sufficiently	☐
197	206	Select quantity conversion dialog box only with quantity <> zero	The short text describes the object sufficiently	☐
198	207	Observed test- or base-temperature is outside the ISO recommended range	Space: object requires documentation	☐
199	208	Observed test- or base-pressure is outside the ISO recommended range	Space: object requires documentation	☐
200	209	Base density or base heating value is zero; calculation fails	Space: object requires documentation	☐
201	210	Database update of Table & failed, sy-subrc = &	The short text describes the object sufficiently	☐
202	211	Table OIB08 could not be locked	The short text describes the object sufficiently	☐
203	212	Tables T006 and T006_OIB do not match	Space: object requires documentation	☐
204	213	QCI: Parameter & not defined in table OIB07	The short text describes the object sufficiently	☐
205	214	QCI: Unit of parameter & is missing.	The short text describes the object sufficiently	☐
206	215	QCI: Parameter & not found in internal table	The short text describes the object sufficiently	☐
207	216	QCI: Structure & does not exist - internal processing error	Space: object requires documentation	☐
208	217	QCI: Structure & field &: This field has a not supported data type	The short text describes the object sufficiently	☐
209	218	QCI: SGERG-88, pressure out of range	The short text describes the object sufficiently	☐
210	219	QCI: SGERG-88, temperature out of range	The short text describes the object sufficiently	☐
211	220	QCI: SGERG-88, no convergency #3	The short text describes the object sufficiently	☐
212	221	QCI: SGERG-88, no solution	The short text describes the object sufficiently	☐
213	222	QCI: SGERG-88, conflicting input	The short text describes the object sufficiently	☐
214	223	QCI: SGERG-88, no convergency #1	The short text describes the object sufficiently	☐
215	224	QCI: SGERG-88, no convergency #2	The short text describes the object sufficiently	☐
216	225	QCI: SGERG-88, calculation N2 out of range	The short text describes the object sufficiently	☐
217	226	QCI: SGERG-88, calculation N2 and CO2 out of range	The short text describes the object sufficiently	☐
218	227	QCI: SGERG-88, conflicting result for N2	The short text describes the object sufficiently	☐
219	228	QCI: For conversion goup &, use FMTYP & instead of &	The short text describes the object sufficiently	☐
220	229	QCI: test temperature and test pressure values and units are replaced	Space: object requires documentation	☐
221	230	& inactive default sets will be saved and must be activated before use	Space: object requires documentation	☐
222	231	QCI: Base temperature and base pressure values and units are replaced	Space: object requires documentation	☐
223	232	QCI: Base density and base heating value have inconsistent parameters	Space: object requires documentation	☐
224	233	QCI: No unit with a dimension ID "dimensionless" was found	Space: object requires documentation	☐
225	234	Incorrect dimension: enter a unit of measure w. dimension dimensionless	The short text describes the object sufficiently	☐
226	235	Parameter conversion not supported for product type "chemicals"	The short text describes the object sufficiently	☐
227	236	Unit of measure or parameter is not passed to the QCI	Space: object requires documentation	☐
228	237	Base density is calculated by the AGA c-code routines	Space: object requires documentation	☐
229	238	Natural gas base density is not being calculated	Space: object requires documentation	☐
230	239	Natural gas base heating value is not being calculated	Space: object requires documentation	☐
231	240	Transaction unit of measure is initial	Space: object requires documentation	☐
232	241	Transaction quantity is initial	The short text describes the object sufficiently	☐
233	242	Specify a parameter name	The short text describes the object sufficiently	☐
234	243	Duplicate field name &	The short text describes the object sufficiently	☐
235	244	Specify a field name	The short text describes the object sufficiently	☐
236	245	Field names of the parameter & and of the unit have to be different	The short text describes the object sufficiently	☐
237	246	Duplicate parameter name &	The short text describes the object sufficiently	☐
238	247	Insert a description of the parameter	The short text describes the object sufficiently	☐
239	248	Density type 4 (relative density air) is not allowed for liquid products	Space: object requires documentation	☐
240	249	Parameter can not be chosen as default parameter; only display possible	Space: object requires documentation	☐
241	250	Parameter does not require a unit of measure	The short text describes the object sufficiently	☐
242	251	Parameter does not require default value, material master value relevant	The short text describes the object sufficiently	☐
243	252	Conversion group not passed to the Quantity Conversion Interface (QCI)	Space: object requires documentation	☐
244	253	SI unit for dimension "volume proportion" is missing in table T006	The short text describes the object sufficiently	☐
245	254	Dimension "Volume proportion" is missing in table T006D	The short text describes the object sufficiently	☐
246	255	Incorrect dimension: BSW requires a unit of dimension "volume proportion"	The short text describes the object sufficiently	☐
247	256	Target unit of measure is initial	Space: object requires documentation	☐
248	257	Product type and density type are not compatible	Space: object requires documentation	☐
249	258	Time zone of plant & not consistent with time zone of other items	Space: object requires documentation	☐
250	259	Not all fields are relevant for the selected product type	Space: object requires documentation	☐
251	260	QCI : Conversion group - reading group relation not maintained for &	Space: object requires documentation	☐
252	261	QCI : Reading group entry not present	Space: object requires documentation	☐
253	262	Heating value classes are not consistent	Space: object requires documentation	☐
254	263	Transaction can not be used anymore; use the new default transaction	Space: object requires documentation	☐
255	264	Pressure value is not in the correct format	The short text describes the object sufficiently	☐
256	265	Entries for volume correction factors not found in customizing table	Space: object requires documentation	☐
257	266	Temperature value out of range	Space: object requires documentation	☐
258	267	API gravity can not be less than -131.5	Space: object requires documentation	☐
259	268	Density type is initial	Space: object requires documentation	☐
260	269	AGA c-codes require correct temperature,pressure and density units	Space: object requires documentation	☐
261	270	API c-codes require correct temperature unit	Space: object requires documentation	☐
262	271	Density type has to be set to 4 for the chosen AGA conversion	The short text describes the object sufficiently	☐
263	272	Test density is calculated by the AGA c-code routines	Space: object requires documentation	☐
264	273	AGA8:Error code 5: The root was not bounded in routine DGROSS	Space: object requires documentation	☐
265	274	AGA8:Error code 6: No convergence in routine DGROSS	Space: object requires documentation	☐
266	275	AGA8:Error code 7: Square root in routine VIRGS is negative	Space: object requires documentation	☐
267	276	AGA8:Error code 8: Combined values of input parameters are inconsistent	Space: object requires documentation	☐
268	277	AGA8:Error code 9: Invalid term in routine VIRGS	Space: object requires documentation	☐
269	278	AGA8:Error code 11: Method was not 1 or 2	Space: object requires documentation	☐
270	279	AGA8:Error code 13: Flowing temperature (mat. temperature)is out of range	Space: object requires documentation	☐
271	280	AGA8:Error code 12: Flowing pressure (material pressure) is out of range	Space: object requires documentation	☐
272	281	AGA8:Error code 14: Heating value is not within the valid range	Space: object requires documentation	☐
273	282	AGA8:Error code 15: Natural gas relative density is not in valid range	Space: object requires documentation	☐
274	283	AGA8:Error code 16: Mole fraction of components is not in valid range	Space: object requires documentation	☐
275	284	AGA8:Error code 17/37: Test (reference) temperature is out of range	Space: object requires documentation	☐
276	285	AGA8:Error code 18/38: Test (reference) pressure is out of range	Space: object requires documentation	☐
277	286	AGA8:Warning code 22: Flowing (material) pressure is within warning range	Space: object requires documentation	☐
278	287	AGA8:Warning code 23: Flowing (material) temp. is within warning range	Space: object requires documentation	☐
279	288	AGA8:Warning code 24: Heating value is within the warning range	Space: object requires documentation	☐
280	289	AGA8:Warning code 26: Mole fract. of components is within the warn. range	Space: object requires documentation	☐
281	290	AGA8:Warning code 25: natural gas relative density within warning range	Space: object requires documentation	☐
282	291	AGA8:Error code 1: Pressure has a negative derivative	Space: object requires documentation	☐
283	292	AGA8:Warning code 2: Density in bracket exceeds the maximum	Space: object requires documentation	☐
284	293	AGA8:Error code 3: Maximum iterations exceeded in bracket	Space: object requires documentation	☐
285	294	AGA8:Error code 4: Maximum iterations exceeded	Space: object requires documentation	☐
286	295	AGA8:Error code 32: Flowing (material) pressure is out of range	Space: object requires documentation	☐
287	296	AGA8:Error code 33: Flowing (material) temperature is out of range	Space: object requires documentation	☐
288	297	AGA8:Error code 36: Mole frac. for at least one component is out of range	Space: object requires documentation	☐
289	298	AGA8:Error code 39: Sum of mole fractions out of range	Space: object requires documentation	☐
290	299	AGA8:Warning code 42: Flowing (material) pressure is within warning range	Space: object requires documentation	☐
291	300	AGA8:Warning code 43: Flowing (material) temp. is within warning range	Space: object requires documentation	☐
292	301	AGA8:Warning code 46: Mole frac.for at least one comp. within warn. range	Space: object requires documentation	☐
293	302	AGA8:Warning code 49: Sum of mole fractions within a warning range	Space: object requires documentation	☐
294	303	The number & is not in the correct format	The short text describes the object sufficiently	☐
295	304	Combustion temperature value for target energy is 0; no UoM specified	Space: object requires documentation	☐
296	305	Thermal expansion coefficient can not be zero for product type 'chemical'	The short text describes the object sufficiently	☐
297	306	Natural gas test density is zero; enter a test density	Space: object requires documentation	☐
298	307	Conversion handling indicator for nat.gas conversion group & not valid	Space: object requires documentation	☐
299	308	Invalid density type passed to QCI (Quantity Conversion Interface)	Space: object requires documentation	☐
300	309	Invalid indicator passed to QCI (Quantity Conversion Interface)	Space: object requires documentation	☐
301	310	SAP routines for natural gas are not activated: Results will be reset	Space: object requires documentation	☐
302	311	Base heating value class not defined in conversion group	The short text describes the object sufficiently	☐
303	312	Conversion Group & not assigned for physical properties data set	The short text describes the object sufficiently	☐
304	313	Unit of measure & not customized	The short text describes the object sufficiently	☐
305	314	Conversion parameters taken from first available reason code	The short text describes the object sufficiently	☐
306	315	Target unit of measure parameters not specified	Space: object requires documentation	☐
307	316	Test or material temperature and unit for test density are not specified	Space: object requires documentation	☐
308	317	Material temperature or target volume reference temperature out of range	Space: object requires documentation	☐
309	318	Material pressure or target volume reference pressure out of range	Space: object requires documentation	☐
310	319	Unit of measure & does not have a volume dimension	The short text describes the object sufficiently	☐
311	320	Conversion of structure to table failed	Space: object requires documentation	☐
312	321	Conversion group is already assigned to an active delivery network	Space: object requires documentation	☐
313	322	Internal table & has no entries, processing stops, contact administrator	The short text describes the object sufficiently	☐
314	323	Read IMG Documentation before activating the SAP natural gas routines	Space: object requires documentation	☐
315	324	Unexpected internal table: &	Space: object requires documentation	☐
316	325	This default set is active and cannot be changed or deleted	Space: object requires documentation	☐
317	326	Default data sets have been successfully updated	The short text describes the object sufficiently	☐
318	327	Default set is inconsistent and cannot be activated	Space: object requires documentation	☐
319	328	Default set has been checked and activated	The short text describes the object sufficiently	☐
320	329	QCI check results are inconsistent	Space: object requires documentation	☐
321	330	Calculation results in a zero value for target quantity	Space: object requires documentation	☐
322	331	Defaults could not be determined for raw material	Space: object requires documentation	☐
323	332	Defaults could not be determined for liquid hydrocarbon product	Space: object requires documentation	☐
324	333	Defaults could not be determined for natural gas product &	Space: object requires documentation	☐
325	334	Specify either the plant or the material	Space: object requires documentation	☐
326	335	Tables T006 and T006_OIB are consistent	Space: object requires documentation	☐
327	336	& entries inserted into table T006_OIB	Space: object requires documentation	☐
328	337	No parameter set found in quantity conversion default parameter table	Space: object requires documentation	☐
329	338	Default set is inconsistent	Space: object requires documentation	☐
330	339	& entries deleted from table T006_OIB	The short text describes the object sufficiently	☐
331	340	& (&)	The short text describes the object sufficiently	☐
332	341	Table T006 updated with data from T006_OIB	The short text describes the object sufficiently	☐
333	342	Change of conversion group changes the product type	Space: object requires documentation	☐
334	343	Technical table entries are missing; QCI cannot perform any conversion	Space: object requires documentation	☐
335	344	Table T006_OIB updated	The short text describes the object sufficiently	☐
336	345	SETID & not maintained in table OIB_PPP_HEADER	The short text describes the object sufficiently	☐
337	346	Table OIB_PPP_DATA not maintained for & &	The short text describes the object sufficiently	☐
338	347	& entries inserted into table T006D_OIB	Space: object requires documentation	☐
339	348	No physical properties for & & available	The short text describes the object sufficiently	☐
340	349	Conversion error from & to &	The short text describes the object sufficiently	☐
341	350	Table T006D_OIB is consistent	Space: object requires documentation	☐
342	351	Table T006D updated with data from old T006D	Space: object requires documentation	☐
343	352	Update of Table T006D_OIB from old data failed	Space: object requires documentation	☐
344	353	Transaction cannot be used; use transactions O3C1 or O3C2 instead	Space: object requires documentation	☐
345	354	Transaction data is only available in test mode	Space: object requires documentation	☐
346	356	Line & (OIL-material &): Additional quantity table is empty	Space: object requires documentation	☐
347	357	UOM '&' not found in appendix table (material & plant &)	Space: object requires documentation	☐
348	359	Material & / & Column &: MSEG-& not in quantity table/not consistent	Space: object requires documentation	☐
349	361	Transaction unit of measure for BSW % has to be at ambient conditions	Space: object requires documentation	☐
350	362	Target unit of measure for BSW % is defined at ambient conditions	Space: object requires documentation	☐
351	363	Default sets have been activated without check	The short text describes the object sufficiently	☐
352	364	Material & does not exist	The short text describes the object sufficiently	☐
353	367	Unit of measure & does not have dimension &	The short text describes the object sufficiently	☐
354	368	Enter unit of measure for parameter value	The short text describes the object sufficiently	☐
355	369	Enter parameter value for unit of measure &1	The short text describes the object sufficiently	☐
356	370	UoM & not available in table T006.	The short text describes the object sufficiently	☐
357	371	Material can not be selected for proportion or product unit function	The short text describes the object sufficiently	☐
358	372	Material can not be assigned to conversion group and/or excise duty group	The short text describes the object sufficiently	☐
359	373	Quantity differences found for material: & plant: &	The short text describes the object sufficiently	☐
360	375	Conversion group & is not consistent with material & and is corrected	The short text describes the object sufficiently	☐
361	376	Plant data not required and is deleted, conversion based on conv.group	The short text describes the object sufficiently	☐
362	377	Quantity in stock keeping unit can not be zero, enter a non zero value	The short text describes the object sufficiently	☐
363	378	Internal table & is not consistent with corresponding core table	Space: object requires documentation	☐
364	379	Internal table & contains no entry for corresponding core table entry	Space: object requires documentation	☐
365	380	The number of decimals should be less than &	The short text describes the object sufficiently	☐
366	381	Material document cannot be posted; quantities are not consistent	Space: object requires documentation	☐
367	382	Material document can not be posted, MSEGO1 missing for line &	Space: object requires documentation	☐
368	383	All converted defaults (OIB03) will be released for another conversion	The short text describes the object sufficiently	☐
369	384	Update of defaults successful; activate the saved inactive sets	The short text describes the object sufficiently	☐
370	385	Plant,storagelocation, transaction quantity and/or UoM and date missing &	Space: object requires documentation	☐
371	386	Material missing for static quantity conversion	Space: object requires documentation	☐
372	387	Posting of delivery is not possible; quantity values are not correct	Space: object requires documentation	☐
373	388	QCI: RFC-Error: &	The short text describes the object sufficiently	☐
374	389	QCI: External API function not installed	The short text describes the object sufficiently	☐
375	390	QCI: External AGA function not installed	The short text describes the object sufficiently	☐
376	391		The short text describes the object sufficiently	☐
377	392		The short text describes the object sufficiently	☐
378	393		The short text describes the object sufficiently	☐
379	394		The short text describes the object sufficiently	☐
380	395		The short text describes the object sufficiently	☐
381	396		The short text describes the object sufficiently	☐
382	397		The short text describes the object sufficiently	☐
383	398	Parameters not found in material document table MSEGO1	The short text describes the object sufficiently	☐
384	400	No parameter entries found for reading group & (conversion mode &)	Space: object requires documentation	☐
385	401	No reading group specified for conv group &	The short text describes the object sufficiently	☐
386	402	Update of table & failed	The short text describes the object sufficiently	☐
387	403	Invalid conversion group: Product type is incorrect	Space: object requires documentation	☐
388	404	Units of measure for stock quantities differ between tables & and &	The short text describes the object sufficiently	☐
389	405	Stock table entries not found	The short text describes the object sufficiently	☐
390	406	Update of Table & failed (& &)	The short text describes the object sufficiently	☐
391	407	Text for parameter & not maintained in language & in Customizing (O587)	The short text describes the object sufficiently	☐
392	409	Error occured for entry & & & &	The short text describes the object sufficiently	☐
393	410	Check at least one stock table for which report has to be executed	The short text describes the object sufficiently	☐
394	411	Unit of measure is initial	The short text describes the object sufficiently	☐
395	412	Oil content% cannot be changed due to posted stock	Space: object requires documentation	☐
396	413		The short text describes the object sufficiently	☐
397	414		The short text describes the object sufficiently	☐
398	415		The short text describes the object sufficiently	☐
399	416		The short text describes the object sufficiently	☐
400	417		The short text describes the object sufficiently	☐
401	418		The short text describes the object sufficiently	☐
402	419		The short text describes the object sufficiently	☐
403	420			☐
404	421			☐
405	422			☐
406	423			☐
407	424			☐
408	425			☐
409	426			☐
410	427			☐
411	428			☐
412	429			☐
413	430			☐
414	431			☐
415	432			☐
416	433			☐
417	434			☐
418	435			☐
419	436			☐
420	437			☐
421	438			☐
422	439			☐
423	440			☐
424	441			☐
425	442			☐
426	443			☐
427	444			☐
428	445			☐
429	446			☐
430	447			☐
431	448			☐
432	449			☐
433	450	Quantity conversion check failed for one item; all qty lines deleted	Space: object requires documentation	☐
434	451	ED material quantity passed to IF not accurate; all qty lines deleted	Space: object requires documentation	☐
435	452	Quantity conversion check failed for ED material;all qty lines deleted	Space: object requires documentation	☐
436	453	No additional quantities imported from external application	Space: object requires documentation	☐
437	454	No parameter set (MSEGO1) imported from external application	Space: object requires documentation	☐
438	455	Negative additional quantity not allowed; posting not possible	Space: object requires documentation	☐
439	457	Transaction quantity is zero, all additional quantities are set to zero	Space: object requires documentation	☐
440	458			☐
441	459			☐
442	460			☐
443	461			☐
444	462			☐
445	463			☐
446	464			☐
447	465			☐
448	466			☐
449	467			☐
450	468			☐
451	469			☐
452	470			☐
453	471	Language & can not be converted or is not defined	Space: object requires documentation	☐
454	472	Reading group & not maintained for language & , parameter & .	Space: object requires documentation	☐
455	473	Material document or year are missing	Space: object requires documentation	☐
456	474	Material document & in year & does not exist	Space: object requires documentation	☐
457	475	Material document &, line & in year & does not exist	Space: object requires documentation	☐
458	476			☐
459	477			☐
460	478	Material definition for & is inconsistent; quantity conversion terminates	Space: object requires documentation	☐
461	479			☐
462	480			☐
463	481			☐
464	482			☐
465	483			☐
466	484			☐
467	485			☐
468	486			☐
469	487			☐
470	488			☐
471	489			☐
472	490			☐
473	491			☐
474	492			☐
475	493			☐
476	494			☐
477	495			☐
478	496			☐
479	497			☐
480	498			☐
481	499			☐
482	500	No data in table MARA available	Space: object requires documentation	☐
483	501	Unit of measure group & not found in customizing table	Space: object requires documentation	☐
484	502	History table records exist with stock, change not possible	Space: object requires documentation	☐
485	503	Table & contains stock, changing the unit of measure group is not allowed	Space: object requires documentation	☐
486	504	Synchronize all plants for this material with the same UoM group	Space: object requires documentation	☐
487	505	& &	Space: object requires documentation	☐
488	506	Material: &1 , no movement possible until &2 same across all plants	Space: object requires documentation	☐
489	507			☐
490	508			☐
491	516		Space: object requires documentation	☐
492	517			☐
493	518			☐
494	519			☐
495	520			☐
496	521			☐
497	522			☐
498	523			☐
499	524			☐
500	525			☐
501	526			☐
502	527			☐
503	528			☐
504	529			☐
505	530			☐
506	531			☐
507	532			☐
508	533			☐
509	534			☐
510	535			☐
511	536			☐
512	537			☐
513	538			☐
514	539			☐
515	540			☐
516	541			☐
517	542			☐
518	543			☐
519	544			☐
520	545			☐
521	546			☐
522	547			☐
523	548			☐
524	549			☐
525	550			☐
526	551			☐
527	552			☐
528	553			☐
529	554			☐
530	555			☐
531	556			☐
532	557			☐
533	558			☐
534	559			☐
535	560			☐
536	561			☐
537	562			☐
538	563			☐
539	564			☐
540	565			☐
541	566			☐
542	567			☐
543	568			☐
544	569			☐
545	570			☐
546	571			☐
547	572			☐
548	573			☐
549	574			☐
550	575			☐
551	576			☐
552	577			☐
553	578			☐
554	579			☐
555	580			☐
556	581			☐
557	582			☐
558	583			☐
559	584			☐
560	585			☐
561	586			☐
562	587			☐
563	588			☐
564	589			☐
565	590			☐
566	591			☐
567	592			☐
568	593			☐
569	594			☐
570	595			☐
571	596			☐
572	597			☐
573	598			☐
574	599			☐
575	600	Error in the Quantity Conversion Interface (QCI)	Space: object requires documentation	☐
576	601	Gain posting: Final Tracking indicator has to be set	Space: object requires documentation	☐
577	602	Goods Issue: A not-cancelled GI or a GR already exists for this item	Space: object requires documentation	☐
578	603	Goods Issue Cancellation not possible: A GR already exists for this item	Space: object requires documentation	☐
579	604	Goods issue reversal is not possible for two step transfer with G/L	Space: object requires documentation	☐
580	605	Goods receipt reversal is not possible if gain already posted	Space: object requires documentation	☐
581	606	Posting not possible: Final tracking indicator set previously	Space: object requires documentation	☐
582	607	Goods receipt not possible: No goods issue exists for this item	Space: object requires documentation	☐
583	608	Two-Step-Transfer gain is out of tolerance by &1 %	Space: object requires documentation	☐
584	609	Goods receipt: A gain has already been posted for this item	Space: object requires documentation	☐
585	610	More than one item found for material &1 and tracking number &2	Space: object requires documentation	☐
586	611	Two-Step-Transfer loss is out of tolerance by &1 %	Space: object requires documentation	☐
587	612	Final transfer indication already set: Reversal is not possible	Space: object requires documentation	☐
588	613	An internal error occured in the Two-Step-Transfer BADI-Implementation	Space: object requires documentation	☐
589	614	Error reading table MSEGO1, MSEGO2	Space: object requires documentation	☐
590	615	Product type not found for material &1 on plant &2	Space: object requires documentation	☐
591	616	Density & is not in the correct format	Space: object requires documentation	☐
592	617	Thermal expansion coefficient & is not in the correct format	Space: object requires documentation	☐
593	618	Product type not found for conversion group &1	Space: object requires documentation	☐
594	619	QCI-Default Set changed due to change of date in document header	Space: object requires documentation	☐
595	620	External tracking number has to be set	Space: object requires documentation	☐
596	621	Table entry &1 for selected two-step-tracking record not found	Space: object requires documentation	☐
597	622	Final tracking indicator set for selected two-step-tracking record	Space: object requires documentation	☐
598	623	Material number '&1' of selected two-step-tracking record does not match	Space: object requires documentation	☐
599	624	Plant '&1' of selected two-step-tracking record does not match	Space: object requires documentation	☐
600	625	No two-step-transfer tracking information selected for 305 posting	Space: object requires documentation	☐
601	626	Subsequent adjustment not supported for HPM-materials (use MB04 instead)	Space: object requires documentation	☐
602	627	Cost center and / or account missing for plant &1 and / or &2	Space: object requires documentation	☐
603	628			☐
604	629			☐
605	630			☐
606	631			☐
607	632			☐
608	633			☐
609	634			☐
610	635			☐
611	636			☐
612	637			☐
613	638			☐
614	639			☐
615	640			☐
616	641			☐
617	642			☐
618	643			☐
619	644			☐
620	645			☐
621	646			☐
622	647			☐
623	648			☐
624	649			☐
625	650			☐
626	651			☐
627	652			☐
628	653			☐
629	654			☐
630	655			☐
631	656			☐
632	657			☐
633	658			☐
634	659			☐
635	660			☐
636	661			☐
637	662			☐
638	663			☐
639	664			☐
640	665			☐
641	666			☐
642	667			☐
643	668			☐
644	669			☐
645	670			☐
646	671			☐
647	672			☐
648	673			☐
649	674			☐
650	675			☐
651	676			☐
652	677			☐
653	678			☐
654	679			☐
655	680			☐
656	681			☐
657	682			☐
658	683			☐
659	684			☐
660	685			☐
661	686			☐
662	687			☐
663	688			☐
664	689			☐
665	690			☐
666	691			☐
667	692			☐
668	693			☐
669	694			☐
670	695			☐
671	696			☐
672	697			☐
673	698			☐
674	699			☐
675	700			☐
676	701			☐
677	702			☐
678	703			☐
679	704			☐
680	705			☐
681	706			☐
682	707			☐
683	708			☐
684	709			☐
685	710			☐
686	711			☐
687	712			☐
688	713			☐
689	714			☐
690	715			☐
691	716			☐
692	717			☐
693	718			☐
694	719			☐
695	720			☐
696	721			☐
697	722			☐
698	723			☐
699	724			☐
700	725			☐
701	726			☐
702	727			☐
703	728			☐
704	729			☐
705	730			☐
706	731			☐
707	732			☐
708	733			☐
709	734			☐
710	735			☐
711	736			☐
712	737			☐
713	738			☐
714	739			☐
715	740			☐
716	741			☐
717	742			☐
718	743			☐
719	744			☐
720	745			☐
721	746			☐
722	747			☐
723	748			☐
724	749			☐
725	750			☐
726	751			☐
727	752			☐
728	753			☐
729	754			☐
730	755			☐
731	756			☐
732	757			☐
733	758			☐
734	759			☐
735	760			☐
736	761			☐
737	762			☐
738	763			☐
739	764			☐
740	765			☐
741	766			☐
742	767			☐
743	768			☐
744	769			☐
745	770			☐
746	771			☐
747	772			☐
748	773			☐
749	774			☐
750	775			☐
751	776			☐
752	777			☐
753	778			☐
754	779			☐
755	780			☐
756	781			☐
757	782			☐
758	783			☐
759	784			☐
760	785			☐
761	786			☐
762	787			☐
763	788			☐
764	789			☐
765	790			☐
766	791			☐
767	792			☐
768	793			☐
769	794			☐
770	795			☐
771	796			☐
772	797			☐
773	798			☐
774	799			☐
775	800			☐
776	801			☐
777	802			☐
778	803			☐
779	804			☐
780	805			☐
781	806			☐
782	807			☐
783	808			☐
784	809			☐
785	810			☐
786	811			☐
787	812			☐
788	813			☐
789	814			☐
790	815			☐
791	816			☐
792	817			☐
793	818			☐
794	819			☐
795	820			☐
796	821			☐
797	822			☐
798	823			☐
799	824			☐
800	825			☐
801	826			☐
802	827			☐
803	828			☐
804	829			☐
805	830			☐
806	831			☐
807	832			☐
808	833			☐
809	834			☐
810	835			☐
811	836			☐
812	837			☐
813	838			☐
814	839			☐
815	840			☐
816	841			☐
817	842			☐
818	843			☐
819	844			☐
820	845			☐
821	846			☐
822	847			☐
823	848			☐
824	849	BAdI: You are not allowed to change the field content of &	Space: object requires documentation	☐
825	850	BAdI: Field & is not ready for input. (Change is not taken over)	Space: object requires documentation	☐
826	851			☐
827	852			☐
828	853			☐
829	854			☐
830	855			☐
831	856			☐
832	857			☐
833	858			☐
834	859			☐
835	860			☐
836	861			☐
837	862			☐
838	863			☐
839	864			☐
840	865			☐
841	866			☐
842	867			☐
843	868			☐
844	869			☐
845	870			☐
846	871			☐
847	872			☐
848	873			☐
849	874			☐
850	875			☐
851	876			☐
852	877			☐
853	878			☐
854	879			☐
855	880			☐
856	881			☐
857	882			☐
858	883			☐
859	884			☐
860	885			☐
861	886			☐
862	887			☐
863	888			☐
864	889			☐
865	890			☐
866	891			☐
867	892			☐
868	893			☐
869	894			☐
870	895			☐
871	896	Quantities have been changed in BAdI and are not synchronized	Space: object requires documentation	☐
872	897	Quantity difference for UoM & found: & and & are out of tolerance	Space: object requires documentation	☐
873	898	LINE_ID, PARENT_ID and LINE_DEPTH are not consistent for &	Space: object requires documentation	☐
874	899	An unexpected error has occurred in the HPM/TD Interface	Space: object requires documentation	☐
875	900			☐
876	901			☐
877	902			☐
878	903			☐
879	904			☐
880	905			☐
881	906			☐
882	907			☐
883	908			☐
884	909			☐
885	910			☐
886	911			☐
887	912			☐
888	913			☐
889	914			☐
890	915			☐
891	916			☐
892	917			☐
893	918			☐
894	919			☐
895	920			☐
896	921			☐
897	922			☐
898	923			☐
899	924			☐
900	925			☐
901	926			☐
902	927			☐
903	928			☐
904	929			☐
905	930			☐
906	931			☐
907	932			☐
908	933			☐
909	934			☐
910	935			☐
911	936			☐
912	937			☐
913	938			☐
914	939			☐
915	940			☐
916	941			☐
917	942			☐
918	943			☐
919	944			☐
920	945			☐
921	946			☐
922	947			☐
923	948			☐
924	951			☐
925	952			☐
926	953			☐
927	954			☐
928	955			☐
929	956			☐
930	957			☐
931	958			☐
932	959			☐
933	960			☐
934	961			☐
935	962			☐
936	963			☐
937	964			☐
938	965			☐
939	966			☐
940	967			☐
941	968			☐
942	969			☐
943	970			☐
944	971			☐
945	972			☐
946	973			☐
947	974			☐
948	975			☐
949	976			☐
950	977			☐
951	978			☐
952	979			☐
953	980			☐
954	981			☐
955	982			☐
956	983			☐
957	984			☐
958	985			☐
959	986			☐
960	987			☐
961	988			☐
962	989			☐
963	990			☐
964	991			☐
965	992		The short text describes the object sufficiently	☐
966	993		The short text describes the object sufficiently	☐
967	994		The short text describes the object sufficiently	☐
968	995		The short text describes the object sufficiently	☐
969	996		The short text describes the object sufficiently	☐
970	997		The short text describes the object sufficiently	☐
971	998		The short text describes the object sufficiently	☐
972	999		The short text describes the object sufficiently	☐

History

Last changed on/by	20110810	SAP
SAP Release Created in