Data Element list used by SAP ABAP Table QGEVAL_CHARACTERISTIC (QM Evaluations: Data Structure for Characteristics)
SAP ABAP Table QGEVAL_CHARACTERISTIC (QM Evaluations: Data Structure for Characteristics) is using
# | Object Type | Object Name | Object Description | Note |
---|---|---|---|---|
1 | Data Element | CHARG_D | Batch Number | |
2 | Data Element | QADDPRO | Sample Quantity Is Added | |
3 | Data Element | QANTEILO | Estimated Fraction Above the Tolerance Range | |
4 | Data Element | QANTEILOC | Estimated Fraction Above the Tolerance Range | |
5 | Data Element | QANTEILU | Estimated Fraction Below the Tolerance Range | |
6 | Data Element | QANTEILUC | Estimated Fraction Below the Tolerance Range | |
7 | Data Element | QANZFEHEH4 | Number of Nonconforming Sample Units | |
8 | Data Element | QANZFEHL4 | Number of Defects Found | |
9 | Data Element | QANZSTIPRO | Number of Partial Samples for the Characteristic | |
10 | Data Element | QANZWERTG4 | Number of Inspected Sample Units | |
11 | Data Element | QANZWERTO4 | Number of Measured Values Above the Tolerance Range | |
12 | Data Element | QANZWERTU4 | Number of Measured Values Below the Tolerance Range | |
13 | Data Element | QATTRIBUT | Attribute of the Results Record (Valid, Invalid,...) | |
14 | Data Element | QAUSSLOS | Characteristic Relevant for Qual. Score and Scrap Share | |
15 | Data Element | QBEASTATUS | Results Record Status | |
16 | Data Element | QBFHLZHL | Recording the Number of Defects | |
17 | Data Element | QCGRAUSW | Assigned Code Group or Selected Set | |
18 | Data Element | QCHARACT_ID1 | Characteristic Description for Quality Data Exchange | |
19 | Data Element | QCODE | Code | |
20 | Data Element | QCODEGRP | Code Group | |
21 | Data Element | QCODETEXT | Description of a Code in the Catalog | |
22 | Data Element | QDATUMAEND | Date on Which Data Record Was Changed | |
23 | Data Element | QDATUMERST | Date on Which the Data Record Was Created | |
24 | Data Element | QDBEWERTG | Valuation of the Characteristic for Dynamic Modification | |
25 | Data Element | QDOKUKZ | Documentation Required for Inspection Results | |
26 | Data Element | QDRUCK1 | ||
27 | Data Element | QEANTVERF | Fraction Calculation | |
28 | Data Element | QERGDATH | Origin of Results Data | |
29 | Data Element | QESTUKZ | Recording Type | |
30 | Data Element | QFEHLKLAS | Defect class | |
31 | Data Element | QFEHLREC | Defects Recording Automatically Called Up | |
32 | Data Element | QGEVAL_BATCH_HIERARCHY | Batch Hierarchy | |
33 | Data Element | QISTSTPUMF | Number of Recorded Sample Units | |
34 | Data Element | QIVARIANZ | Internal Dispersion of Valid Measured Values | |
35 | Data Element | QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
36 | Data Element | QKURZTEXT | Short Text | |
37 | Data Element | QKZAENBEL | Create Change Documents During Results Recording | |
38 | Data Element | QKZDESTROY | Destructive Inspection | |
39 | Data Element | QKZFORMEL | Calculated Characteristic | |
40 | Data Element | QKZPKAT | Reference to Characteristic Attribute Required | |
41 | Data Element | QKZPROCCHAR | Process Characteristic | |
42 | Data Element | QKZQUMK | Measured Values Must Be Recorded | |
43 | Data Element | QKZQUNMK | Quantitative Characteristic | |
44 | Data Element | QKZSOLLPR | Check Target Value | |
45 | Data Element | QKZTOLOB | Upper Specification Limit | |
46 | Data Element | QKZTOLUN | Lower Specification Limit | |
47 | Data Element | QLEITSTKZ | Control Characteristics Results - QM Subsystem | |
48 | Data Element | QLFNKN | Current Node Number from Order Counter APLZL | |
49 | Data Element | QLZEITKZ | Long-Term Inspection | |
50 | Data Element | QMASCHINE | General Information | |
51 | Data Element | QMASSEH | Unit of Measurement, in Which Quantitative Data Is Stored | |
52 | Data Element | QMAXWERT | Maximum Value of the Valid Measured Values | |
53 | Data Element | QMAXWERTC | Maximum Value of the Valid Measured Values | |
54 | Data Element | QMBEWERTG | Inspection Result Valuation | |
55 | Data Element | QMEAS_UNIT | Unit of Measurement (Internal Code) | |
56 | Data Element | QMERKNR | Master Inspection Characteristics | |
57 | Data Element | QMERKNRP | Inspection Characteristic Number | |
58 | Data Element | QMINWERT | Minimum Value of the Valid Measured Values | |
59 | Data Element | QMINWERTC | Minimum Value of the Valid Measured Values | |
60 | Data Element | QMITTELWRT | Arithmetic Mean of Valid Measured Values | |
61 | Data Element | QMITTEWRTC | Arithmetic Mean of Valid Measured Values | |
62 | Data Element | QMKKURZTXT | Short Text for the Inspection Characteristic | |
63 | Data Element | QNAENDKZ | Default Control Indicators Cannot Be Changed | |
64 | Data Element | QPARA | Control Indicator "Parameter Characteristic" Set/Not Set | |
65 | Data Element | QPLOS | Inspection Lot Number | |
66 | Data Element | QPMETHODE | Inspection Method | |
67 | Data Element | QPMZWANG | Assignment of Test Equipment Required | |
68 | Data Element | QPROBEMGEH | Base Unit of Measure for the Sample Unit | |
69 | Data Element | QPROBENRPP | Sample Number (Based on an Inspection Point) | |
70 | Data Element | QPRPLATZ | Work Center | |
71 | Data Element | QPRSCHAERF | Inspection Severity | |
72 | Data Element | QPRSTUFE | Inspection Stage | |
73 | Data Element | QPRUEFDATV | Inspection Start Date | |
74 | Data Element | QPRUEFZTV | Starting Time of the Inspection | |
75 | Data Element | QPUMFKZ | Inspection Scope | |
76 | Data Element | QQRKNR | Control Chart Number | |
77 | Data Element | QRZWANG | Characteristic Category | |
78 | Data Element | QSOLLWERTC | Target Value for a Quantitative Characteristic | |
79 | Data Element | QSOLLWERTE | Target Value for a Quantitative Characteristic | |
80 | Data Element | QSPCMK | SPC Characteristic | |
81 | Data Element | QSTDAWC | Standard Deviation of Valid Measured Values | |
82 | Data Element | QSTELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
83 | Data Element | QSTICHPR | Sampling Procedure is Required | |
84 | Data Element | QSYNCRO | Synchronization is Active | |
85 | Data Element | QTLOS | Partial lot number | |
86 | Data Element | QTOLOB | Upper Specification Limit | |
87 | Data Element | QTOLOBC | Upper Specification Limit | |
88 | Data Element | QTOLUN | Lower Tolerance Limit | |
89 | Data Element | QTOLUNC | Lower Specification Limit | |
90 | Data Element | QTSTICHPRO | Partial Samples Possible | |
91 | Data Element | QVARIANZ | Dispersion (Variance) of Valid Measured Values | |
92 | Data Element | QVARIANZC | Dispersion (Variance) of Valid Measured Values | |
93 | Data Element | QVERSNR | Version Number | |
94 | Data Element | QVERSNRMK | Version Number of the Master Inspection Characteristic | |
95 | Data Element | QVORGAEND | Specifications Can Be Changed | |
96 | Data Element | QWERKAUSW | Plant of the Assigned Selected Set | |
97 | Data Element | QZAEHLER | Plant for the Master Inspection Characteristic | |
98 | Data Element | QZEITAEND | Time at which data record was last changed | |
99 | Data Element | QZEITERSTL | Time at which data record was created | |
100 | Data Element | VORNR | Operation/Activity Number |