Table/Structure Field list used by SAP ABAP Program LQPAAF50 (LQPAAF50)
SAP ABAP Program
LQPAAF50 (LQPAAF50) is using
# | Object Type | Object Name | Object Description | Note |
---|---|---|---|---|
![]() |
![]() |
|||
1 | ![]() |
CHA_QUANTITAT - GRENZEOB1 | First Upper Specification Limit | |
2 | ![]() |
CHA_QUANTITAT - GRENZEOB2 | Second Upper Specification Limit | |
3 | ![]() |
CHA_QUANTITAT - GRENZEUN1 | First Lower Specification Limit | |
4 | ![]() |
CHA_QUANTITAT - GRENZEUN2 | Second Lower Specification Limit | |
5 | ![]() |
CHA_QUANTITAT - GRENZOB1NI | Value Not Initial if Set | |
6 | ![]() |
CHA_QUANTITAT - GRENZOB2NI | Value Not Initial if Set | |
7 | ![]() |
CHA_QUANTITAT - GRENZUN1NI | Value Not Initial if Set | |
8 | ![]() |
CHA_QUANTITAT - GRENZUN2NI | Value Not Initial if Set | |
9 | ![]() |
CHA_QUANTITAT - KLASANZAHL | Number of Value Classes for Inspection Results | |
10 | ![]() |
CHA_QUANTITAT - KLASBREITE | Class Width | |
11 | ![]() |
CHA_QUANTITAT - KLASBRNI | Value Not Initial if Set | |
12 | ![]() |
CHA_QUANTITAT - KLASMINI | Value Not Initial if Set | |
13 | ![]() |
CHA_QUANTITAT - KLASMITTE | Class Midpoint | |
14 | ![]() |
CHA_QUANTITAT - PLAUSIOBEN | Upper Plausibility Limit | |
15 | ![]() |
CHA_QUANTITAT - PLAUSIOBNI | Value Not Initial if Set | |
16 | ![]() |
CHA_QUANTITAT - PLAUSIUNNI | Value Not Initial if Set | |
17 | ![]() |
CHA_QUANTITAT - PLAUSIUNTE | Lower Plausibility Limit | |
18 | ![]() |
CHA_QUANTITAT - SOLLWERT | Target Value for a Quantitative Characteristic | |
19 | ![]() |
CHA_QUANTITAT - SOLLWNI | Value Not Initial if Set | |
20 | ![]() |
CHA_QUANTITAT - TOLERANZOB | Upper Specification Limit | |
21 | ![]() |
CHA_QUANTITAT - TOLERANZUN | Lower Tolerance Limit | |
22 | ![]() |
CHA_QUANTITAT - TOLERWEIOB | Change to Upper Specification Limit | |
23 | ![]() |
CHA_QUANTITAT - TOLERWEIUN | Change to Lower Specification Limit | |
24 | ![]() |
CHA_QUANTITAT - TOLOBNI | Value Not Initial if Set | |
25 | ![]() |
CHA_QUANTITAT - TOLUNNI | Value Not Initial if Set | |
26 | ![]() |
CHA_QUANTITAT - TOLWOBNI | Value Not Initial if Set | |
27 | ![]() |
CHA_QUANTITAT - TOLWUNNI | Value Not Initial if Set | |
28 | ![]() |
PLKO - PLNTY | Task List Type | |
29 | ![]() |
PLMK - AENDERGNR | Change Number | |
30 | ![]() |
PLMK - AUSWMENGE1 | Assigned Code Group or Selected Set | |
31 | ![]() |
PLMK - AUSWMENGE2 | Assigned Code Group or Selected Set | |
32 | ![]() |
PLMK - AUSWMENGE3 | Assigned Code Group or Selected Set | |
33 | ![]() |
PLMK - AUSWMENGE4 | Assigned Code Group or Selected Set | |
34 | ![]() |
PLMK - AUSWMENGE5 | Assigned Code Group or Selected Set | |
35 | ![]() |
PLMK - AUSWMGWRK1 | Plant of the Assigned Selected Set | |
36 | ![]() |
PLMK - AUSWMGWRK2 | Plant of the Assigned Selected Set | |
37 | ![]() |
PLMK - AUSWMGWRK3 | Plant of the Assigned Selected Set | |
38 | ![]() |
PLMK - AUSWMGWRK4 | Plant of the Assigned Selected Set | |
39 | ![]() |
PLMK - AUSWMGWRK5 | Plant of the Assigned Selected Set | |
40 | ![]() |
PLMK - GRENZEOB1 | First Upper Specification Limit | |
41 | ![]() |
PLMK - GRENZEOB2 | Second Upper Specification Limit | |
42 | ![]() |
PLMK - GRENZEUN1 | First Lower Specification Limit | |
43 | ![]() |
PLMK - GRENZEUN2 | Second Lower Specification Limit | |
44 | ![]() |
PLMK - GRENZOB1NI | Value Not Initial if Set | |
45 | ![]() |
PLMK - GRENZOB2NI | Value Not Initial if Set | |
46 | ![]() |
PLMK - GRENZUN1NI | Value Not Initial if Set | |
47 | ![]() |
PLMK - GRENZUN2NI | Value Not Initial if Set | |
48 | ![]() |
PLMK - GUELTIGAB | Valid-From Date | |
49 | ![]() |
PLMK - KATALGART2 | Catalog Type of Assigned Code Group or Selected Set | |
50 | ![]() |
PLMK - KATALGART3 | Catalog Type of Assigned Code Group or Selected Set | |
51 | ![]() |
PLMK - KATALGART4 | Catalog Type of Assigned Code Group or Selected Set | |
52 | ![]() |
PLMK - KATALGART5 | Catalog Type of Assigned Code Group or Selected Set | |
53 | ![]() |
PLMK - KLASANZAHL | Number of Value Classes for Inspection Results | |
54 | ![]() |
PLMK - KLASBREITE | Class Width | |
55 | ![]() |
PLMK - KLASBRNI | Value Not Initial if Set | |
56 | ![]() |
PLMK - KLASMINI | Value Not Initial if Set | |
57 | ![]() |
PLMK - KLASMITTE | Class Midpoint | |
58 | ![]() |
PLMK - KZEINSTELL | Characteristic Type | |
59 | ![]() |
PLMK - LTEXTEKZ | Physical-Sample-Drawing Text Exists | |
60 | ![]() |
PLMK - LTEXTKZ | Inspection Characteristic Long Text Exists | |
61 | ![]() |
PLMK - LTEXTSPR | Language Key | |
62 | ![]() |
PLMK - LTXTENTSPR | Language Key | |
63 | ![]() |
PLMK - MASSEINHSW | Unit of Measurement, in Which Quantitative Data Is Stored | |
64 | ![]() |
PLMK - MERKNR | Inspection Characteristic Number | |
65 | ![]() |
PLMK - MKVERSION | Version Number of the Master Inspection Characteristic | |
66 | ![]() |
PLMK - PLAUSIOBEN | Upper Plausibility Limit | |
67 | ![]() |
PLMK - PLAUSIOBNI | Value Not Initial if Set | |
68 | ![]() |
PLMK - PLAUSIUNNI | Value Not Initial if Set | |
69 | ![]() |
PLMK - PLAUSIUNTE | Lower Plausibility Limit | |
70 | ![]() |
PLMK - PLNKN | Number of the task list node | |
71 | ![]() |
PLMK - QPMK_REF | Reference to Master Insp. Characteristic in Task List | |
72 | ![]() |
PLMK - QPMK_ZAEHL | Plant for the Master Inspection Characteristic | |
73 | ![]() |
PLMK - SOLLWERT | Target Value for a Quantitative Characteristic | |
74 | ![]() |
PLMK - SOLLWNI | Value Not Initial if Set | |
75 | ![]() |
PLMK - STELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
76 | ![]() |
PLMK - STEUERKZ | Cntrl Indicator String for Insp. Char./Master Insp. Char. | |
77 | ![]() |
PLMK - TOLERANZOB | Upper Specification Limit | |
78 | ![]() |
PLMK - TOLERANZSL | Tolerance Key | |
79 | ![]() |
PLMK - TOLERANZUN | Lower Tolerance Limit | |
80 | ![]() |
PLMK - TOLERWAB | Date from Which the Tolerance Change Is Valid | |
81 | ![]() |
PLMK - TOLERWBIS | Date Until Which the Tolerance Change Is Valid | |
82 | ![]() |
PLMK - TOLERWEIOB | Change to Upper Specification Limit | |
83 | ![]() |
PLMK - TOLERWEIUN | Change to Lower Specification Limit | |
84 | ![]() |
PLMK - TOLOBNI | Value Not Initial if Set | |
85 | ![]() |
PLMK - TOLUNNI | Value Not Initial if Set | |
86 | ![]() |
PLMK - TOLWOBNI | Value Not Initial if Set | |
87 | ![]() |
PLMK - TOLWUNNI | Value Not Initial if Set | |
88 | ![]() |
PLMK - VERWMERKM | Master Inspection Characteristics | |
89 | ![]() |
PLMK - ZAEHL | Internal counter | |
90 | ![]() |
PLMKB - AENDERGNR | Change Number | |
91 | ![]() |
PLMKB - ATINN | Internal characteristic | |
92 | ![]() |
PLMKB - AUSWMENGE1 | Assigned Code Group or Selected Set | |
93 | ![]() |
PLMKB - AUSWMENGE2 | Assigned Code Group or Selected Set | |
94 | ![]() |
PLMKB - AUSWMENGE3 | Assigned Code Group or Selected Set | |
95 | ![]() |
PLMKB - AUSWMENGE4 | Assigned Code Group or Selected Set | |
96 | ![]() |
PLMKB - AUSWMENGE5 | Assigned Code Group or Selected Set | |
97 | ![]() |
PLMKB - AUSWMGWRK1 | Plant of the Assigned Selected Set | |
98 | ![]() |
PLMKB - AUSWMGWRK2 | Plant of the Assigned Selected Set | |
99 | ![]() |
PLMKB - AUSWMGWRK3 | Plant of the Assigned Selected Set | |
100 | ![]() |
PLMKB - AUSWMGWRK4 | Plant of the Assigned Selected Set | |
101 | ![]() |
PLMKB - AUSWMGWRK5 | Plant of the Assigned Selected Set | |
102 | ![]() |
PLMKB - GRENZEOB1 | First Upper Specification Limit | |
103 | ![]() |
PLMKB - GRENZEOB2 | Second Upper Specification Limit | |
104 | ![]() |
PLMKB - GRENZEUN1 | First Lower Specification Limit | |
105 | ![]() |
PLMKB - GRENZEUN2 | Second Lower Specification Limit | |
106 | ![]() |
PLMKB - GRENZOB1NI | Value Not Initial if Set | |
107 | ![]() |
PLMKB - GRENZOB2NI | Value Not Initial if Set | |
108 | ![]() |
PLMKB - GRENZUN1NI | Value Not Initial if Set | |
109 | ![]() |
PLMKB - GRENZUN2NI | Value Not Initial if Set | |
110 | ![]() |
PLMKB - GUELTIGAB | Valid-From Date | |
111 | ![]() |
PLMKB - KATALGART2 | Catalog Type of Assigned Code Group or Selected Set | |
112 | ![]() |
PLMKB - KATALGART3 | Catalog Type of Assigned Code Group or Selected Set | |
113 | ![]() |
PLMKB - KATALGART4 | Catalog Type of Assigned Code Group or Selected Set | |
114 | ![]() |
PLMKB - KATALGART5 | Catalog Type of Assigned Code Group or Selected Set | |
115 | ![]() |
PLMKB - KLASANZAHL | Number of Value Classes for Inspection Results | |
116 | ![]() |
PLMKB - KLASBREITE | Class Width | |
117 | ![]() |
PLMKB - KLASBRNI | Value Not Initial if Set | |
118 | ![]() |
PLMKB - KLASMINI | Value Not Initial if Set | |
119 | ![]() |
PLMKB - KLASMITTE | Class Midpoint | |
120 | ![]() |
PLMKB - KZEINSTELL | Characteristic Type | |
121 | ![]() |
PLMKB - LTEXTEKZ | Physical-Sample-Drawing Text Exists | |
122 | ![]() |
PLMKB - LTEXTKZ | Inspection Characteristic Long Text Exists | |
123 | ![]() |
PLMKB - LTEXTSPR | Language Key | |
124 | ![]() |
PLMKB - LTXTENTSPR | Language Key | |
125 | ![]() |
PLMKB - MASSEINHSW | Unit of Measurement, in Which Quantitative Data Is Stored | |
126 | ![]() |
PLMKB - MERKNR | Inspection Characteristic Number | |
127 | ![]() |
PLMKB - MKVERSION | Version Number of the Master Inspection Characteristic | |
128 | ![]() |
PLMKB - PLAUSIOBEN | Upper Plausibility Limit | |
129 | ![]() |
PLMKB - PLAUSIOBNI | Value Not Initial if Set | |
130 | ![]() |
PLMKB - PLAUSIUNNI | Value Not Initial if Set | |
131 | ![]() |
PLMKB - PLAUSIUNTE | Lower Plausibility Limit | |
132 | ![]() |
PLMKB - PLNKN | Number of the task list node | |
133 | ![]() |
PLMKB - QPMK_REF | Reference to Master Insp. Characteristic in Task List | |
134 | ![]() |
PLMKB - QPMK_ZAEHL | Plant for the Master Inspection Characteristic | |
135 | ![]() |
PLMKB - SOLLWERT | Target Value for a Quantitative Characteristic | |
136 | ![]() |
PLMKB - SOLLWNI | Value Not Initial if Set | |
137 | ![]() |
PLMKB - STELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
138 | ![]() |
PLMKB - STEUERKZ | Cntrl Indicator String for Insp. Char./Master Insp. Char. | |
139 | ![]() |
PLMKB - TOLERANZOB | Upper Specification Limit | |
140 | ![]() |
PLMKB - TOLERANZSL | Tolerance Key | |
141 | ![]() |
PLMKB - TOLERANZUN | Lower Tolerance Limit | |
142 | ![]() |
PLMKB - TOLERWAB | Date from Which the Tolerance Change Is Valid | |
143 | ![]() |
PLMKB - TOLERWBIS | Date Until Which the Tolerance Change Is Valid | |
144 | ![]() |
PLMKB - TOLERWEIOB | Change to Upper Specification Limit | |
145 | ![]() |
PLMKB - TOLERWEIUN | Change to Lower Specification Limit | |
146 | ![]() |
PLMKB - TOLOBNI | Value Not Initial if Set | |
147 | ![]() |
PLMKB - TOLUNNI | Value Not Initial if Set | |
148 | ![]() |
PLMKB - TOLWOBNI | Value Not Initial if Set | |
149 | ![]() |
PLMKB - TOLWUNNI | Value Not Initial if Set | |
150 | ![]() |
PLMKB - VBKZ | Update indicator | |
151 | ![]() |
PLMKB - VERWMERKM | Master Inspection Characteristics | |
152 | ![]() |
PLMKB - ZAEHL | Internal counter | |
153 | ![]() |
PLMKV - INDEX | Field defined as in SY-TABIX | |
154 | ![]() |
PLMKV - KZEINSTELL | Characteristic Type | |
155 | ![]() |
PLMKV - LOESCHEN | Deletion Indicator | |
156 | ![]() |
PLMKV - MERKNR | Inspection Characteristic Number | |
157 | ![]() |
PLMKV - PLNKN | Number of the task list node | |
158 | ![]() |
PLMKV - SELEKTIERT | Field for selecting records | |
159 | ![]() |
PLMW - GUELTIGAB | Valid-From Date | |
160 | ![]() |
PLMW - MERKNR | Inspection Characteristic Number | |
161 | ![]() |
PLMW - ZUORDNR | Number for Dependent Characteristic Specifications | |
162 | ![]() |
PLMWB - GUELTIGAB | Valid-From Date | |
163 | ![]() |
PLMWB - MERKNR | Inspection Characteristic Number | |
164 | ![]() |
PLMWB - ZUORDNR | Number for Dependent Characteristic Specifications | |
165 | ![]() |
PLMWV - KZEINSTELL | Characteristic Type | |
166 | ![]() |
PLMWV - LOESCHEN | Deletion Indicator | |
167 | ![]() |
PLMWV - MERKNR | Inspection Characteristic Number | |
168 | ![]() |
PLMWV - PLNKN | Number of the task list node | |
169 | ![]() |
PLMWV - SELEKTIERT | Field for selecting records | |
170 | ![]() |
PLMWV - ZUORDNR | Number for Dependent Characteristic Specifications | |
171 | ![]() |
PLPO - PLNKN | Number of the task list node | |
172 | ![]() |
PLPO - PLNTY | Task List Type | |
173 | ![]() |
QMKST - PMMZWANG | Assignment of Test Equipment Required | |
174 | ![]() |
QMKST - PRUEFKAT | Reference to Characteristic Attribute Required | |
175 | ![]() |
QMKST - QUANTITAT | Quantitative Characteristic | |
176 | ![]() |
QPMT - MKMNR | Master Inspection Characteristics | |
177 | ![]() |
QPMT - SPRACHE | Language Key | |
178 | ![]() |
QPMT - VERSION | Version Number of the Inspection Method | |
179 | ![]() |
QPMT - ZAEHLER | Plant for the Master Inspection Characteristic | |
180 | ![]() |
RC27I - INDEX_PLMK | Index referring to record tab. for inspectn. characteristics | |
181 | ![]() |
RC27I - INDEX_PLMW | Index referring to record tab. for insp. charact. values | |
182 | ![]() |
RQPAS - AB_MKNR | Inspection Characteristic Number | |
183 | ![]() |
RQPAS - AB_ZORD | Number for Dependent Characteristic Specifications | |
184 | ![]() |
RQPAS - AENNR | Change Number | |
185 | ![]() |
RQPAS - AKTYP | Activity category in SAP transaction | |
186 | ![]() |
RQPAS - BILDGR | Screen group | |
187 | ![]() |
RQPAS - DATUV_MK | Valid-From Date | |
188 | ![]() |
RQPAS - DATUV_MW | Valid-From Date | |
189 | ![]() |
RQPAS - FLG_VALUES | X and Blank (Indicator) | |
190 | ![]() |
RQPAS - KZHELL | Screens Are Displayed During Create Transaction | |
191 | ![]() |
RQPAS - MASSEINHSW | Measurement Unit in Which Quantitative Data Is Maintained | |
192 | ![]() |
RQPAS - QUALITAT | Qualitative Characteristic | |
193 | ![]() |
RQPAS - QUANTITAT | Quantitative Characteristic | |
194 | ![]() |
STXH - TDID | Text ID | |
195 | ![]() |
SYST - DYNNR | ABAP System Field: Current Dynpro Number | |
196 | ![]() |
SYST - LOOPC | ABAP System Field: Visible Lines of Step Loop | |
197 | ![]() |
SYST - MANDT | ABAP System Field: Client ID of Current User | |
198 | ![]() |
SYST - TABIX | ABAP System Field: Row Index of Internal Tables | |
199 | ![]() |
T185 - FCODE | Function code | |
200 | ![]() |
TC01 - AKTYP | Activity category in the transaction | |
201 | ![]() |
TCA01 - FLG_SEQ | Indicator: parallel / alternative sequences | |
202 | ![]() |
TCA01 - PLNAW | Application of the task list | |
203 | ![]() |
TCA18 - OBJCT | Object of a task list | |
204 | ![]() |
TCA41 - PLNAW | Application of the task list | |
205 | ![]() |
THEAD - TDNAME | Name | |
206 | ![]() |
THEAD - TDOBJECT | Texts: application object | |
207 | ![]() |
TQ21 - DYGRU_NR | Screen group | |
208 | ![]() |
TQ21 - DYNPRO | Screen Number | |
209 | ![]() |
TQ21 - KZ_BLOCKB | Screen Is a List Screen | |
210 | ![]() |
TQTXT - OKCODE | Function Code |