Hypertext: Object Class - Class to which a document belongs.
Document Name
_ISUBISFGA_000015
In this IMG activity you store all permissible measured pressures for each billing class. When a measured pressure is specified for the device installation, the system checks it against these entries. You can define a certain measured pressure as a default value for each billing class. Enter this measured pressure in the Default Value field. If billing-relevant and technical installations take place separately, you can select one value as the default value for the technical installation. If you enter several default values for each billing class, then the first value found by the system is used.
To make sure that these default values are actually proposed, you must maintain the entry SU_P_TE341 in Customizing under: Device Management -> Installation -> Basic Settings -> Define System Parameters for Installation.
If a pressure regulator is installed in the corresponding installation, its measured pressure is proposed.
Example
Requirements
Standard settings
Recommendation
Activities
Check to what extent you can copy the standard settings.
Change or delete the standard settings if necessary.
For a new entry, proceed as follows:
Enter the corresponding billing class in the 'BClss' field.
Enter the permissible measured pressure in the 'MeasPr.' field, and maintain the associated default indicator.
Maintain the measured pressures and associated default indicator.